From: Biju Das <biju.das.jz@bp.renesas.com>

Replace '&pdev->dev' by 'dev' in probe(), this makes few error paths
shorter.

Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Updated commit message by replacing '&pdev->dev' by 'dev'.
 * Collected Rb tag from Morimoto-san.
---
 sound/soc/renesas/rz-ssi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/sound/soc/renesas/rz-ssi.c b/sound/soc/renesas/rz-ssi.c
index f4dc2f68dead..845a55250d70 100644
--- a/sound/soc/renesas/rz-ssi.c
+++ b/sound/soc/renesas/rz-ssi.c
@@ -1119,19 +1119,16 @@ static int rz_ssi_probe(struct platform_device *pdev)
 
 	audio_clk = devm_clk_get(dev, "audio_clk1");
 	if (IS_ERR(audio_clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(audio_clk),
-				     "no audio clk1");
+		return dev_err_probe(dev, PTR_ERR(audio_clk), "no audio clk1");
 
 	ssi->audio_clk_1 = clk_get_rate(audio_clk);
 	audio_clk = devm_clk_get(dev, "audio_clk2");
 	if (IS_ERR(audio_clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(audio_clk),
-				     "no audio clk2");
+		return dev_err_probe(dev, PTR_ERR(audio_clk), "no audio clk2");
 
 	ssi->audio_clk_2 = clk_get_rate(audio_clk);
 	if (!(ssi->audio_clk_1 || ssi->audio_clk_2))
-		return dev_err_probe(&pdev->dev, -EINVAL,
-				     "no audio clk1 or audio clk2");
+		return dev_err_probe(dev, -EINVAL, "no audio clk1 or audio clk2");
 
 	ssi->audio_mck = ssi->audio_clk_1 ? ssi->audio_clk_1 : ssi->audio_clk_2;
 
-- 
2.43.0