From: Biju Das <biju.das.jz@bp.renesas.com>

After audio full duplex testing, playing the recorded file contains a few
playback frames from the previous time. The rz_dmac_terminate_all() does
not reset all the hardware descriptors queued previously, leading to the
wrong descriptor being picked up during the next DMA transfer. Fix the
above issue by resetting all the descriptor headers for a channel in
rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper
descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg().

Cc: stable@kernel.org
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Updated commit message
 * Collected Rb tag from Geert
---
 drivers/dma/sh/rz-dmac.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
index 1f687b08d6b8..3087bbd11d59 100644
--- a/drivers/dma/sh/rz-dmac.c
+++ b/drivers/dma/sh/rz-dmac.c
@@ -557,11 +557,16 @@ rz_dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 static int rz_dmac_terminate_all(struct dma_chan *chan)
 {
 	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_lmdesc *lmdesc = channel->lmdesc.base;
 	unsigned long flags;
+	unsigned int i;
 	LIST_HEAD(head);
 
 	rz_dmac_disable_hw(channel);
 	spin_lock_irqsave(&channel->vc.lock, flags);
+	for (i = 0; i < DMAC_NR_LMDESC; i++)
+		lmdesc[i].header = 0;
+
 	list_splice_tail_init(&channel->ld_active, &channel->ld_free);
 	list_splice_tail_init(&channel->ld_queue, &channel->ld_free);
 	vchan_get_all_descriptors(&channel->vc, &head);
-- 
2.43.0

On Thu, 13 Nov 2025 19:50:48 +0000, Biju wrote:
> After audio full duplex testing, playing the recorded file contains a few
> playback frames from the previous time. The rz_dmac_terminate_all() does
> not reset all the hardware descriptors queued previously, leading to the
> wrong descriptor being picked up during the next DMA transfer. Fix the
> above issue by resetting all the descriptor headers for a channel in
> rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper
> descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg().
> 
> [...]

Applied, thanks!

[1/1] dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()
      commit: 747213b08a1ab6a76e3e3b3e7a209cc1d402b5d0

Best regards,
-- 
~Vinod