[v2] arm64: dts: freescale: add Toradex SMARC iMX95

[PATCH v2 0/2] arm64: dts: freescale: add Toradex SMARC iMX95

Posted by Francesco Dolcini 2 months, 4 weeks ago

From: Francesco Dolcini <francesco.dolcini@toradex.com>

This series adds support for the Toradex SMARC iMX95 SoM and the
Toradex SMARC Development Board.

The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
DSI-DP bridge), and Wi-Fi/BT module.

Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit

João Paulo Gonçalves (1):
  dt-bindings: arm: fsl: add Toradex SMARC iMX95

Max Krummenacher (1):
  arm64: dts: freescale: add Toradex SMARC iMX95

 .../devicetree/bindings/arm/fsl.yaml          |    6 +
 arch/arm64/boot/dts/freescale/Makefile        |    1 +
 .../dts/freescale/imx95-toradex-smarc-dev.dts |  277 ++++
 .../dts/freescale/imx95-toradex-smarc.dtsi    | 1155 +++++++++++++++++
 4 files changed, 1439 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi

-- 
2.47.3

Re: [PATCH v2 0/2] arm64: dts: freescale: add Toradex SMARC iMX95

Posted by Shawn Guo 2 months, 3 weeks ago

On Tue, Nov 11, 2025 at 04:16:12PM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> This series adds support for the Toradex SMARC iMX95 SoM and the
> Toradex SMARC Development Board.
> 
> The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
> RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
> Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
> and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
> and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
> DSI-DP bridge), and Wi-Fi/BT module.
> 
> Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
> Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
> 
> João Paulo Gonçalves (1):
>   dt-bindings: arm: fsl: add Toradex SMARC iMX95
> 
> Max Krummenacher (1):
>   arm64: dts: freescale: add Toradex SMARC iMX95

Applied both, thanks!

Re: [PATCH v2 0/2] arm64: dts: freescale: add Toradex SMARC iMX95

Posted by Francesco Dolcini 2 months, 3 weeks ago

Hello Shawn,

On Tue, Nov 11, 2025 at 04:16:12PM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> This series adds support for the Toradex SMARC iMX95 SoM and the
> Toradex SMARC Development Board.

I noticed you have not picked up this series, please let me know if you
expect any change on this.

Thanks,
Francesco