This patch introduces a new PCI driver for AMD Versal-based accelerator
cards.

The driver provides basic module and PCI device initialization, based on
BAR resources used to establish a hardware queue-based ring buffer between
the PCIe host and the Versal Management Runtime (VMR) service running on
the embedded SoC. This interface enables firmware management and board
health monitoring.

Key features:
   - PCI probe and BAR resource initialization.
   - Integration with configfs for firmware management
   - Compatibility check using firmware-reported UUIDs

The base firmware image is expected under /lib/firmware/xilinx/<fw_name>
and can be programmed to the device through the configfs interface.
Firmware transfer is handled via a remote queue service (added in a later
patch).

Co-developed-by: DMG Karthik <Karthik.DMG@amd.com>
Signed-off-by: DMG Karthik <Karthik.DMG@amd.com>
Co-developed-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: David Zhang <yidong.zhang@amd.com>
---
 MAINTAINERS                              |   5 +
 drivers/accel/Kconfig                    |   1 +
 drivers/accel/Makefile                   |   3 +-
 drivers/accel/amd_vpci/Kconfig           |  15 ++
 drivers/accel/amd_vpci/Makefile          |   6 +
 drivers/accel/amd_vpci/versal-pci-main.c | 279 +++++++++++++++++++++++
 drivers/accel/amd_vpci/versal-pci.h      |  62 +++++
 7 files changed, 370 insertions(+), 1 deletion(-)
 create mode 100644 drivers/accel/amd_vpci/Kconfig
 create mode 100644 drivers/accel/amd_vpci/Makefile
 create mode 100644 drivers/accel/amd_vpci/versal-pci-main.c
 create mode 100644 drivers/accel/amd_vpci/versal-pci.h

diff --git a/MAINTAINERS b/MAINTAINERS
index ddecf1ef3bed..924a00c04646 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1257,6 +1257,11 @@ F:	drivers/spi/spi-amd-pci.c
 F:	drivers/spi/spi-amd.c
 F:	drivers/spi/spi-amd.h
 
+AMD VERSAL PCI DRIVER
+M:	Yidong Zhang <yidong.zhang@amd.com>
+S:	Supported
+F:	drivers/accel/amd_vpci/
+
 AMD XDNA DRIVER
 M:	Min Ma <mamin506@gmail.com>
 M:	Lizhi Hou <lizhi.hou@amd.com>
diff --git a/drivers/accel/Kconfig b/drivers/accel/Kconfig
index bb01cebc42bf..c82ebf9accfa 100644
--- a/drivers/accel/Kconfig
+++ b/drivers/accel/Kconfig
@@ -25,6 +25,7 @@ menuconfig DRM_ACCEL
 	  and debugfs).
 
 source "drivers/accel/amdxdna/Kconfig"
+source "drivers/accel/amd_vpci/Kconfig"
 source "drivers/accel/habanalabs/Kconfig"
 source "drivers/accel/ivpu/Kconfig"
 source "drivers/accel/qaic/Kconfig"
diff --git a/drivers/accel/Makefile b/drivers/accel/Makefile
index ffc3fa588666..92906c9cf3d9 100644
--- a/drivers/accel/Makefile
+++ b/drivers/accel/Makefile
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_DRM_ACCEL_AMDXDNA)		+= amdxdna/
+obj-$(CONFIG_DRM_ACCEL_AMD_VPCI)	+= amd_vpci/
 obj-$(CONFIG_DRM_ACCEL_HABANALABS)	+= habanalabs/
 obj-$(CONFIG_DRM_ACCEL_IVPU)		+= ivpu/
 obj-$(CONFIG_DRM_ACCEL_QAIC)		+= qaic/
-obj-$(CONFIG_DRM_ACCEL_ROCKET)		+= rocket/
\ No newline at end of file
+obj-$(CONFIG_DRM_ACCEL_ROCKET)		+= rocket/
diff --git a/drivers/accel/amd_vpci/Kconfig b/drivers/accel/amd_vpci/Kconfig
new file mode 100644
index 000000000000..dcf83bf3d8e6
--- /dev/null
+++ b/drivers/accel/amd_vpci/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config DRM_ACCEL_AMD_VPCI
+	tristate "AMD Versal PCIe Management Driver"
+	depends on DRM_ACCEL
+	depends on PCI && HAS_IOMEM
+	select FW_LOADER
+	select CONFIGFS_FS
+	default m
+	help
+	  AMD Versal PCIe Management Driver provides management services,
+	  including download firmware, program bitstream, and communicate with
+	  the User function.
+
+	  If "M" is selected, the driver module will be versal-pci
diff --git a/drivers/accel/amd_vpci/Makefile b/drivers/accel/amd_vpci/Makefile
new file mode 100644
index 000000000000..03849875ad0b
--- /dev/null
+++ b/drivers/accel/amd_vpci/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_DRM_ACCEL_AMD_VPCI) := versal-pci.o
+
+versal-pci-y := \
+	versal-pci-main.o
diff --git a/drivers/accel/amd_vpci/versal-pci-main.c b/drivers/accel/amd_vpci/versal-pci-main.c
new file mode 100644
index 000000000000..4172f7ac9bd1
--- /dev/null
+++ b/drivers/accel/amd_vpci/versal-pci-main.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Versal PCIe device
+ *
+ * Copyright (C) 2025 Advanced Micro Devices, Inc. All rights reserved.
+ */
+
+#include <linux/pci.h>
+
+#include "versal-pci.h"
+
+#define DRV_NAME			"amd-versal-pci"
+
+#define PCI_DEVICE_ID_V70PQ2		0x50B0
+#define PCI_DEVICE_ID_RAVE		0x5700
+#define VERSAL_XCLBIN_MAGIC_ID		"xclbin2"
+
+static inline u32 versal_pci_devid(struct versal_pci_device *vdev)
+{
+	return ((pci_domain_nr(vdev->pdev->bus) << 16) |
+		PCI_DEVID(vdev->pdev->bus->number, vdev->pdev->devfn));
+}
+
+static int versal_pci_load_shell(struct versal_pci_device *vdev, char *fw_name)
+{
+	const struct firmware *fw;
+	struct axlf *xsabin;
+	int ret;
+
+	strim(fw_name);
+
+	ret = request_firmware(&fw, fw_name, &vdev->pdev->dev);
+	if (ret) {
+		vdev_warn(vdev, "request xsabin fw %s failed %d", fw_name, ret);
+		return ret;
+	}
+
+	xsabin = (struct axlf *)fw->data;
+	if (memcmp(xsabin->magic, VERSAL_XCLBIN_MAGIC_ID, strlen(VERSAL_XCLBIN_MAGIC_ID))) {
+		vdev_err(vdev, "Invalid device firmware");
+		ret = -EINVAL;
+		goto release_firmware;
+	}
+
+	if (!fw->size ||
+	    fw->size != xsabin->header.length ||
+	    fw->size < sizeof(*xsabin) ||
+	    fw->size > SZ_1G) {
+		vdev_err(vdev, "Invalid device firmware size %zu", fw->size);
+		ret = -EINVAL;
+		goto release_firmware;
+	}
+
+	if (!uuid_equal(&vdev->intf_uuid, &xsabin->header.rom_uuid)) {
+		vdev_err(vdev, "base shell doesn't match uuid %pUb", &xsabin->header.rom_uuid);
+		ret = -EINVAL;
+		goto release_firmware;
+	}
+
+	/* TODO upload fw to card */
+	if (ret) {
+		vdev_err(vdev, "failed to load xsabin %s : %d", fw_name, ret);
+		goto release_firmware;
+	}
+
+	vdev_info(vdev, "Downloaded xsabin %pUb of size %lld Bytes",
+		  &xsabin->header.uuid, xsabin->header.length);
+
+release_firmware:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static inline struct versal_pci_device *item_to_vdev(struct config_item *item)
+{
+	return container_of(to_configfs_subsystem(to_config_group(item)),
+			    struct versal_pci_device, cfs_subsys);
+}
+
+static ssize_t versal_pci_cfs_config_store(struct config_item *item,
+					   const char *page, size_t count)
+{
+	struct versal_pci_device *vdev = item_to_vdev(item);
+	u32 config;
+	int ret;
+
+	ret = kstrtou32(page, 0, &config);
+	if (ret)
+		return -EINVAL;
+
+	if (config)
+		ret = versal_pci_load_shell(vdev, vdev->fw.name);
+
+	if (ret)
+		return -EFAULT;
+
+	return count;
+}
+CONFIGFS_ATTR_WO(versal_pci_cfs_, config);
+
+static ssize_t versal_pci_cfs_image_show(struct config_item *item, char *page)
+{
+	struct versal_pci_device *vdev = item_to_vdev(item);
+
+	vdev_info(vdev, "fw name: %s", vdev->fw.name);
+
+	return 0;
+}
+
+static ssize_t versal_pci_cfs_image_store(struct config_item *item,
+					  const char *page, size_t count)
+{
+	struct versal_pci_device *vdev = item_to_vdev(item);
+
+	count = snprintf(vdev->fw.name, sizeof(vdev->fw.name), "%s", page);
+
+	vdev_info(vdev, "fw name: %s", vdev->fw.name);
+	return count;
+}
+CONFIGFS_ATTR(versal_pci_cfs_, image);
+
+static struct configfs_attribute *versal_pci_cfs_attrs[] = {
+	&versal_pci_cfs_attr_config,
+	&versal_pci_cfs_attr_image,
+	NULL,
+};
+
+static const struct config_item_type versal_pci_cfs_table = {
+	.ct_owner = THIS_MODULE,
+	.ct_attrs = versal_pci_cfs_attrs,
+};
+
+static int versal_pci_cfs_init(struct versal_pci_device *vdev)
+{
+	struct configfs_subsystem *subsys = &vdev->cfs_subsys;
+
+	snprintf(subsys->su_group.cg_item.ci_namebuf,
+		 sizeof(subsys->su_group.cg_item.ci_namebuf),
+		 "%s%x", DRV_NAME, versal_pci_devid(vdev));
+
+	subsys->su_group.cg_item.ci_type = &versal_pci_cfs_table;
+
+	config_group_init(&subsys->su_group);
+	return configfs_register_subsystem(subsys);
+}
+
+static void versal_pci_fw_fini(struct versal_pci_device *vdev)
+{
+	uuid_copy(&vdev->intf_uuid, &uuid_null);
+}
+
+static void versal_pci_cfs_fini(struct configfs_subsystem *subsys)
+{
+	configfs_unregister_subsystem(subsys);
+}
+
+static void versal_pci_device_teardown(struct versal_pci_device *vdev)
+{
+	versal_pci_cfs_fini(&vdev->cfs_subsys);
+	versal_pci_fw_fini(vdev);
+}
+
+static int versal_pci_uuid_parse(struct versal_pci_device *vdev, uuid_t *uuid)
+{
+	char str[UUID_STRING_LEN];
+	u8 i, j;
+	int len = strlen(vdev->fw_id);
+
+	/* parse uuid into a valid uuid string format */
+	for (i = 0, j = 0; i < len && i < sizeof(str); i++) {
+		str[j++] = vdev->fw_id[i];
+		if (j == 8 || j == 13 || j == 18 || j == 23)
+			str[j++] = '-';
+	}
+
+	if (uuid_parse(str, uuid)) {
+		vdev_warn(vdev, "Invalid fw_id format");
+		return -EINVAL;
+	}
+
+	vdev_info(vdev, "Interface uuid %pU", uuid);
+	return 0;
+}
+
+static int versal_pci_fw_init(struct versal_pci_device *vdev)
+{
+	int ret;
+
+	/* TODO request compatible fw_id from card */
+
+	ret = versal_pci_uuid_parse(vdev, &vdev->intf_uuid);
+
+	return ret;
+}
+
+static int versal_pci_device_setup(struct versal_pci_device *vdev)
+{
+	int ret;
+
+	ret = versal_pci_fw_init(vdev);
+	if (ret) {
+		vdev_err(vdev, "Failed to init fw, err %d", ret);
+		goto comm_chan_fini;
+	}
+
+	ret = versal_pci_cfs_init(vdev);
+	if (ret) {
+		vdev_err(vdev, "Failed to init configfs subsys, err %d", ret);
+		goto comm_chan_fini;
+	}
+
+	return 0;
+
+comm_chan_fini:
+
+	return ret;
+}
+
+static void versal_pci_remove(struct pci_dev *pdev)
+{
+	struct versal_pci_device *vdev = pci_get_drvdata(pdev);
+
+	versal_pci_device_teardown(vdev);
+}
+
+static int versal_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
+{
+	struct versal_pci_device *vdev;
+	int ret;
+
+	vdev = devm_kzalloc(&pdev->dev, sizeof(*vdev), GFP_KERNEL);
+	if (!vdev)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, vdev);
+	vdev->pdev = pdev;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		vdev_err(vdev, "Failed to enable device %d", ret);
+		return ret;
+	}
+
+	vdev->io_regs = pcim_iomap_region(vdev->pdev, MGMT_BAR, DRV_NAME);
+	if (IS_ERR(vdev->io_regs)) {
+		vdev_err(vdev, "Failed to map RM shared memory BAR%d", MGMT_BAR);
+		return PTR_ERR(vdev->io_regs);
+	}
+
+	ret = versal_pci_device_setup(vdev);
+	if (ret) {
+		vdev_err(vdev, "Failed to setup Versal device %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id versal_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_V70PQ2), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RAVE), },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, versal_pci_ids);
+
+static struct pci_driver versal_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = versal_pci_ids,
+	.probe = versal_pci_probe,
+	.remove = versal_pci_remove,
+};
+
+module_pci_driver(versal_pci_driver);
+
+MODULE_DESCRIPTION("AMD Versal PCIe Management Driver");
+MODULE_AUTHOR("XRT Team <runtimeca39d@amd.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/accel/amd_vpci/versal-pci.h b/drivers/accel/amd_vpci/versal-pci.h
new file mode 100644
index 000000000000..ca309aee87ad
--- /dev/null
+++ b/drivers/accel/amd_vpci/versal-pci.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for Versal PCIe device
+ *
+ * Copyright (C) 2025 Advanced Micro Devices, Inc. All rights reserved.
+ */
+
+#ifndef __VERSAL_PCI_H
+#define __VERSAL_PCI_H
+
+#include <linux/configfs.h>
+#include <linux/firmware.h>
+
+#define MGMT_BAR		0
+
+#define vdev_info(vdev, fmt, args...)					\
+	dev_info(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
+
+#define vdev_warn(vdev, fmt, args...)					\
+	dev_warn(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
+
+#define vdev_err(vdev, fmt, args...)					\
+	dev_err(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
+
+#define vdev_dbg(vdev, fmt, args...)					\
+	dev_dbg(&(vdev)->pdev->dev, fmt, ##args)
+
+struct versal_pci_device;
+
+struct axlf_header {
+	__u64				length;
+	__u8				reserved1[24];
+	uuid_t				rom_uuid;
+	__u8				reserved2[64];
+	uuid_t				uuid;
+	__u8				reserved3[24];
+} __packed;
+
+struct axlf {
+	__u8				magic[8];
+	__u8				reserved[296];
+	struct axlf_header		header;
+} __packed;
+
+struct fw_info {
+	__u32				opcode;
+	char				name[128];
+};
+
+struct versal_pci_device {
+	struct pci_dev			*pdev;
+
+	struct fw_info			fw;
+
+	void __iomem			*io_regs;
+	uuid_t				intf_uuid;
+	__u8				fw_id[UUID_STRING_LEN + 1];
+
+	struct configfs_subsystem	cfs_subsys;
+};
+
+#endif	/* __VERSAL_PCI_H */
-- 
2.34.1

Le 11/11/2025 à 02:15, David Zhang a écrit :
> This patch introduces a new PCI driver for AMD Versal-based accelerator
> cards.
> 
> The driver provides basic module and PCI device initialization, based on
> BAR resources used to establish a hardware queue-based ring buffer between
> the PCIe host and the Versal Management Runtime (VMR) service running on
> the embedded SoC. This interface enables firmware management and board
> health monitoring.
> 
> Key features:
>     - PCI probe and BAR resource initialization.
>     - Integration with configfs for firmware management
>     - Compatibility check using firmware-reported UUIDs
> 
> The base firmware image is expected under /lib/firmware/xilinx/<fw_name>
> and can be programmed to the device through the configfs interface.
> Firmware transfer is handled via a remote queue service (added in a later
> patch).
> 
> Co-developed-by: DMG Karthik <Karthik.DMG@amd.com>
> Signed-off-by: DMG Karthik <Karthik.DMG@amd.com>
> Co-developed-by: Nishad Saraf <nishads@amd.com>
> Signed-off-by: Nishad Saraf <nishads@amd.com>
> Signed-off-by: David Zhang <yidong.zhang@amd.com>
> ---

...

> +static int versal_pci_device_setup(struct versal_pci_device *vdev)
> +{
> +	int ret;
> +
> +	ret = versal_pci_fw_init(vdev);
> +	if (ret) {
> +		vdev_err(vdev, "Failed to init fw, err %d", ret);
> +		goto comm_chan_fini;
> +	}
> +
> +	ret = versal_pci_cfs_init(vdev);
> +	if (ret) {

Do we need to call versal_pci_fw_fini()?
(here or in the error handling path to be future proof)

> +		vdev_err(vdev, "Failed to init configfs subsys, err %d", ret);
> +		goto comm_chan_fini;
> +	}
> +
> +	return 0;
> +
> +comm_chan_fini:
> +
> +	return ret;
> +}

...

> diff --git a/drivers/accel/amd_vpci/versal-pci.h b/drivers/accel/amd_vpci/versal-pci.h
> new file mode 100644
> index 000000000000..ca309aee87ad
> --- /dev/null
> +++ b/drivers/accel/amd_vpci/versal-pci.h
> @@ -0,0 +1,62 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Driver for Versal PCIe device
> + *
> + * Copyright (C) 2025 Advanced Micro Devices, Inc. All rights reserved.
> + */
> +
> +#ifndef __VERSAL_PCI_H
> +#define __VERSAL_PCI_H
> +
> +#include <linux/configfs.h>
> +#include <linux/firmware.h>
> +
> +#define MGMT_BAR		0
> +
> +#define vdev_info(vdev, fmt, args...)					\
> +	dev_info(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)

\n could be added after fmt, as it is not included in the messages 
themselves, when used.

Same for the other macro below.

> +
> +#define vdev_warn(vdev, fmt, args...)					\
> +	dev_warn(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
> +
> +#define vdev_err(vdev, fmt, args...)					\
> +	dev_err(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
> +
> +#define vdev_dbg(vdev, fmt, args...)					\
> +	dev_dbg(&(vdev)->pdev->dev, fmt, ##args)

...

CJ

Hi Chris,

On 11/11/25 01:38, Christophe JAILLET wrote:
> Caution: This message originated from an External Source. Use proper 
> caution when opening attachments, clicking links, or responding.
> 
> 
> Le 11/11/2025 à 02:15, David Zhang a écrit :
>> This patch introduces a new PCI driver for AMD Versal-based accelerator
>> cards.
>>
>> The driver provides basic module and PCI device initialization, based on
>> BAR resources used to establish a hardware queue-based ring buffer 
>> between
>> the PCIe host and the Versal Management Runtime (VMR) service running on
>> the embedded SoC. This interface enables firmware management and board
>> health monitoring.
>>
>> Key features:
>>     - PCI probe and BAR resource initialization.
>>     - Integration with configfs for firmware management
>>     - Compatibility check using firmware-reported UUIDs
>>
>> The base firmware image is expected under /lib/firmware/xilinx/<fw_name>
>> and can be programmed to the device through the configfs interface.
>> Firmware transfer is handled via a remote queue service (added in a later
>> patch).
>>
>> Co-developed-by: DMG Karthik <Karthik.DMG@amd.com>
>> Signed-off-by: DMG Karthik <Karthik.DMG@amd.com>
>> Co-developed-by: Nishad Saraf <nishads@amd.com>
>> Signed-off-by: Nishad Saraf <nishads@amd.com>
>> Signed-off-by: David Zhang <yidong.zhang@amd.com>
>> ---
> 
> ...
> 
>> +static int versal_pci_device_setup(struct versal_pci_device *vdev)
>> +{
>> +     int ret;
>> +
>> +     ret = versal_pci_fw_init(vdev);
>> +     if (ret) {
>> +             vdev_err(vdev, "Failed to init fw, err %d", ret);
>> +             goto comm_chan_fini;
>> +     }
>> +
>> +     ret = versal_pci_cfs_init(vdev);
>> +     if (ret) {
> 
> Do we need to call versal_pci_fw_fini()?
> (here or in the error handling path to be future proof)
> 
>> +             vdev_err(vdev, "Failed to init configfs subsys, err %d", 
>> ret);
>> +             goto comm_chan_fini;
>> +     }
>> +
>> +     return 0;
>> +
>> +comm_chan_fini:
>> +
>> +     return ret;
>> +}
> 
> ...
> 
>> diff --git a/drivers/accel/amd_vpci/versal-pci.h 
>> b/drivers/accel/amd_vpci/versal-pci.h
>> new file mode 100644
>> index 000000000000..ca309aee87ad
>> --- /dev/null
>> +++ b/drivers/accel/amd_vpci/versal-pci.h
>> @@ -0,0 +1,62 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Driver for Versal PCIe device
>> + *
>> + * Copyright (C) 2025 Advanced Micro Devices, Inc. All rights reserved.
>> + */
>> +
>> +#ifndef __VERSAL_PCI_H
>> +#define __VERSAL_PCI_H
>> +
>> +#include <linux/configfs.h>
>> +#include <linux/firmware.h>
>> +
>> +#define MGMT_BAR             0
>> +
>> +#define vdev_info(vdev, fmt, 
>> args...)                                        \
>> +     dev_info(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
> 
> \n could be added after fmt, as it is not included in the messages
> themselves, when used.

I tested this with "\n" on latest linux kernel, it will give us one 
extra line. I think latest linux has no need to add this extra "\n" anymore.

Meanwhile, I will address all your other comments and also update the 
copyright to 2026.

Happy new year to everyone!

Thanks,
David

> 
> Same for the other macro below.
> 
>> +
>> +#define vdev_warn(vdev, fmt, 
>> args...)                                        \
>> +     dev_warn(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
>> +
>> +#define vdev_err(vdev, fmt, args...)                                 \
>> +     dev_err(&(vdev)->pdev->dev, "%s: "fmt, __func__, ##args)
>> +
>> +#define vdev_dbg(vdev, fmt, args...)                                 \
>> +     dev_dbg(&(vdev)->pdev->dev, fmt, ##args)
> 
> ...
> 
> CJ