Update the regulators node to link to the correct and expected
samsung,s2mpg10-regulators binding, in order to describe the regulators
available on this PMIC.
Additionally, describe the supply inputs of the regulator rails, with
the supply names matching the datasheet.
While at it, update the description and example slightly.
Note: S2MPG10 is typically used as the main-PMIC together with an
S2MPG11 PMIC in a main/sub configuration, hence the datasheet and the
binding both suffix the supplies with an 'm'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
v4:
- separate bindings for s2mpg10-pmic and s2mpg11-pmic (Krzysztof)
v3:
- move to new samsung,s2mpg10.yaml file
- move all patternProperties to top-level
---
.../bindings/mfd/samsung,s2mpg10-pmic.yaml | 57 ++++++++++++++++++++--
1 file changed, 54 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
index 6475cd1d2d15e07d953c8b302c90c785835985e5..0ea1a440b983a47a55fc86d6251b89056ba51172 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
@@ -10,12 +10,13 @@ maintainers:
- André Draszik <andre.draszik@linaro.org>
description: |
- This is part of the device tree bindings for the S2MPG family of Power
- Management IC (PMIC).
+ This is part of the device tree bindings for the S2MPG10 Power Management IC
+ (PMIC).
The Samsung S2MPG10 is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, RTC, clock outputs, and additional
- GPIO interfaces.
+ GPIO interfaces and is typically complemented by S2MPG10 PMIC in a main/sub
+ configuration as the main PMIC.
properties:
compatible:
@@ -31,6 +32,7 @@ properties:
regulators:
type: object
+ $ref: /schemas/regulator/samsung,s2mpg10-regulator.yaml
description:
List of child nodes that specify the regulators.
@@ -38,6 +40,32 @@ properties:
wakeup-source: true
+patternProperties:
+ "^vinb([1-9]|10)m-supply$":
+ description:
+ Phandle to the power supply for each buck rail of this PMIC. There is a
+ 1:1 mapping of supply to rail, e.g. vinb1m-supply supplies buck1m.
+
+ "^vinl([1-9]|1[0-5])m-supply$":
+ description: |
+ Phandle to the power supply for one or multiple LDO rails of this PMIC.
+ The mapping of supply to rail(s) is as follows:
+ vinl1m - ldo13m
+ vinl2m - ldo15m
+ vinl3m - ldo1m, ldo5m, ldo7m
+ vinl4m - ldo3m, ldo8m
+ vinl5m - ldo16m
+ vinl6m - ldo17m
+ vinl7m - ldo6m, ldo11m, ldo24m, ldo28m
+ vinl8m - ldo12m
+ vinl9m - ldo2m, ldo4m
+ vinl10m - ldo9m, ldo14m, ldo18m, 19m, ldo20m, ldo25m
+ vinl11m - ldo23m, ldo31m
+ vinl12m - ldo29m
+ vinl13m - ldo30m
+ vinl14m - ldo21m
+ vinl15m - ldo10m, ldo22m, ldo26m, ldo27m
+
required:
- compatible
- interrupts
@@ -49,6 +77,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
pmic {
compatible = "samsung,s2mpg10-pmic";
@@ -58,6 +87,8 @@ examples:
system-power-controller;
wakeup-source;
+ vinl3m-supply = <&buck8m>;
+
clocks {
compatible = "samsung,s2mpg10-clk";
#clock-cells = <1>;
@@ -65,5 +96,25 @@ examples:
};
regulators {
+ buck8m {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <450000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <6250>;
+ };
+
+ ldo1m {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ ldo20m {
+ regulator-name = "vdd_dmics";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ samsung,ext-control = <S2MPG10_EXTCTRL_LDO20M_EN2>;
+ };
};
};
--
2.51.2.1041.gc1ab5b90ca-goog