Hi David,
On 11/9/25 10:39, David Heidelberg via B4 Relay wrote:
> # Short summary
>
> This patch series extends the Qualcomm CAMSS (Camera Subsystem),
> including CSID and CSIPHY components, to support C-PHY mode configuration.
Awesome to see this actually working after so much time and prior effort!
>
> # Background and motivation
>
> Modern smartphone cameras increasingly rely on MIPI C-PHY rather than D-PHY,
> thanks to its higher data throughput and signal efficiency. As a result,
> many OEMs adopt C-PHY interfaces for main (rear) cameras on Qualcomm-based
> devices.
>
> Until now, mainline Linux lacked C-PHY configuration support for Qualcomm
> chipsets, preventing bring-up of primary camera sensors on several
> Snapdragon platforms. This series closes that gap.
I think it's worth being clearer here that this is only tested on
SDM845, and will only work on sdm845 anyway because of the lane
configuration.
Additionally, with Luca's explicit D-phy check removed, other platforms
won't error out if someone tries to use c-phy without adding the lane
configuration (and whatever other configuration might also be needed),
so it might be worth adding a proper check for that.
>
> - Introduces C-PHY configuration support for the CAMSS driver stack,
> covering both CSID and CSIPHY blocks.
> - Successfully enables C-PHY operation on the Snapdragon 845 platform.
> - Tested on OnePlus 6 and 6T phones running mainline Linux,
> using the Sony IMX519 main camera sensor.
> - The new configuration allows other chipsets versionsto enable C-PHY by
> simply adding corresponding sensor driver support and csiphy
> initialization data, following the example set for sdm845.
>
> With this patch series, mainline Linux gains working C-PHY support for
> Snapdragon 845, paving the way for improved main camera functionality
> across many Qualcomm-based devices. The groundwork also simplifies
> future enablement efforts for additional SoCs and sensors.
woohoo!
Kind regards,
Casey (she/they)
>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
> Casey Connolly (1):
> media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 MIPI CSI-2 CPHY init
>
> David Heidelberg (6):
> media: qcom: camss: csiphy: Introduce C-PHY
> media: qcom: camss: csiphy-3ph: Use odd bits for configuring C-PHY lanes
> media: qcom: camss: Prepare CSID for C-PHY support
> media: qcom: camss: csiphy-3ph: Use sdm845 C-PHY configuration sequence
> media: qcom: camss: Account for C-PHY when calculating link frequency
> media: qcom: camss: Remove D-PHY-only endpoint restriction
>
> Petr Hodina (1):
> media: qcom: camss: Initialize lanes after lane configuration is available
>
> .../media/platform/qcom/camss/camss-csid-gen2.c | 1 +
> drivers/media/platform/qcom/camss/camss-csid.c | 3 +-
> drivers/media/platform/qcom/camss/camss-csid.h | 1 +
> .../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 165 ++++++++++++++++-----
> drivers/media/platform/qcom/camss/camss-csiphy.c | 6 +-
> drivers/media/platform/qcom/camss/camss-csiphy.h | 2 +
> drivers/media/platform/qcom/camss/camss.c | 24 ++-
> drivers/media/platform/qcom/camss/camss.h | 2 +-
> 8 files changed, 146 insertions(+), 58 deletions(-)
> ---
> base-commit: 9c0826a5d9aa4d52206dd89976858457a2a8a7ed
> change-id: 20251109-qcom-cphy-bb8cbda1c644
>
> Best regards,