For AM62A, we need to use the newly created clk-ctrl property to
properly handle data edge sampling configuration. Add them in main
device tree.

Fixes: 5cc5ea7b6d7b ("drm/tidss: Add support for AM62A7 DSS")
Cc: stable@vger.kernel.org
Signed-off-by: Swamil Jain <s-jain1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 9e5b75a4e88e..15a9ee35dbce 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -77,6 +77,12 @@ audio_refclk1: clock-controller@82e4 {
 			assigned-clock-parents = <&k3_clks 157 18>;
 			#clock-cells = <0>;
 		};
+
+		dss_clk_ctrl: dss-clk-ctrl@8300 {
+			compatible = "ti,am625-dss-clk-ctrl", "syscon";
+			reg = <0x8300 0x4>;
+		};
+
 	};
 
 	dmss: bus@48000000 {
@@ -1136,6 +1142,7 @@ dss: dss@30200000 {
 			 <&k3_clks 186 2>;
 		clock-names = "fck", "vp1", "vp2";
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		ti,clk-ctrl = <&dss_clk_ctrl>;
 		status = "disabled";
 
 		dss_ports: ports {

On Thu, Nov 06, 2025 at 07:42:26PM +0530, Swamil Jain wrote:
> For AM62A, we need to use the newly created clk-ctrl property to
> properly handle data edge sampling configuration. Add them in main
> device tree.
> 
> Fixes: 5cc5ea7b6d7b ("drm/tidss: Add support for AM62A7 DSS")
> Cc: stable@vger.kernel.org
> Signed-off-by: Swamil Jain <s-jain1@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index 9e5b75a4e88e..15a9ee35dbce 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -77,6 +77,12 @@ audio_refclk1: clock-controller@82e4 {
>  			assigned-clock-parents = <&k3_clks 157 18>;
>  			#clock-cells = <0>;
>  		};
> +
> +		dss_clk_ctrl: dss-clk-ctrl@8300 {
> +			compatible = "ti,am625-dss-clk-ctrl", "syscon";
> +			reg = <0x8300 0x4>;

NAK, you just ignored everything which was said.

Best regards,
Krzysztof