From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The macros defining the mask values for the EARC, EARC PHY resets,
and the DSP RUN_STALL signal can be dropped as they are not and will
not be used anywhere else except to set the value of the "mask" field
from "struct imx8mp_reset_map". In this particular case, based on the
name of the "mask" field, you can already deduce what these values are
for, which is why defining macros for them doesn't offer any new
information, nor does it help with the code readability.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index eceb37ff5dc5..e9643365a62c 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -14,11 +14,7 @@
 #include <linux/reset-controller.h>
 
 #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
-#define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(0)
-#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(1)
-
 #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET	0x108
-#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK	BIT(5)
 
 struct imx8mp_reset_map {
 	unsigned int offset;
@@ -29,17 +25,17 @@ struct imx8mp_reset_map {
 static const struct imx8mp_reset_map reset_map[] = {
 	[IMX8MP_AUDIOMIX_EARC_RESET] = {
 		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_EARC_RESET_MASK,
+		.mask = BIT(0),
 		.active_low = true,
 	},
 	[IMX8MP_AUDIOMIX_EARC_PHY_RESET] = {
 		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK,
+		.mask = BIT(1),
 		.active_low = true,
 	},
 	[IMX8MP_AUDIOMIX_DSP_RUNSTALL] = {
 		.offset	= IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK,
+		.mask = BIT(5),
 		.active_low = false,
 	},
 };
-- 
2.43.0

On Di, 2025-11-04 at 04:02 -0800, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> 
> The macros defining the mask values for the EARC, EARC PHY resets,
> and the DSP RUN_STALL signal can be dropped as they are not and will
> not be used anywhere else except to set the value of the "mask" field
> from "struct imx8mp_reset_map". In this particular case, based on the
> name of the "mask" field, you can already deduce what these values are
> for, which is why defining macros for them doesn't offer any new
> information, nor does it help with the code readability.
> 
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
>  drivers/reset/reset-imx8mp-audiomix.c | 10 +++-------
>  1 file changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
> index eceb37ff5dc5..e9643365a62c 100644
> --- a/drivers/reset/reset-imx8mp-audiomix.c
> +++ b/drivers/reset/reset-imx8mp-audiomix.c
> @@ -14,11 +14,7 @@
>  #include <linux/reset-controller.h>
>  
>  #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
> -#define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(0)
> -#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(1)
> -
>  #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET	0x108
> -#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK	BIT(5)
>  
>  struct imx8mp_reset_map {
>  	unsigned int offset;
> @@ -29,17 +25,17 @@ struct imx8mp_reset_map {
>  static const struct imx8mp_reset_map reset_map[] = {
>  	[IMX8MP_AUDIOMIX_EARC_RESET] = {
>  		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
> -		.mask	= IMX8MP_AUDIOMIX_EARC_RESET_MASK,
> +		.mask = BIT(0),

Since the masks are all single-bit, and you make that mandatory in the
next patch, I suggest storing the bit offset in the reset map instead:

-		.mask	= IMX8MP_AUDIOMIX_EARC_RESET_MASK,
+		.bit = 0,

and so on. That way it's clear that no reset control ever manipulates
multiple bits at the same time.

Either way, either in this patch or the next, add an

  #include <linux/bits.h>

for BIT().

regards
Philipp