Hi,

This series adds RTC support for the Renesas RZ/V2H SoC.

The Renesas RZ/V2H RTC IP is based on the same RTCA3 IP as RZ/G3S
(r9a08g045), with the following differences:
- it lacks the time capture functionality
- the maximum supported periodic interrupt frequency is 128Hz instead
  of 256Hz
- it requires two reset lines instead of one

Best regards,
Ovidiu

v3:
- Dropped all changes related to "max_user_freq", as it was removed from
  all drivers by:
  https://lore.kernel.org/all/20251101-max_user_freq-v1-0-c9a274fd6883@bootlin.com/

v2:
- Updated bindings and RTC dts node with "reset-names" property.

Ovidiu Panait (4):
  dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
  rtc: renesas-rtca3: Add support for multiple reset lines
  arm64: dts: renesas: r9a09g057: Add RTC node
  arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC

 .../bindings/rtc/renesas,rz-rtca3.yaml        | 45 ++++++++++++++++---
 arch/arm64/boot/dts/renesas/r9a09g057.dtsi    | 15 +++++++
 .../dts/renesas/r9a09g057h44-rzv2h-evk.dts    |  4 ++
 drivers/rtc/rtc-renesas-rtca3.c               |  2 +-
 4 files changed, 60 insertions(+), 6 deletions(-)

-- 
2.51.0

On Mon, 03 Nov 2025 12:18:44 +0000, Ovidiu Panait wrote:
> This series adds RTC support for the Renesas RZ/V2H SoC.
> 
> The Renesas RZ/V2H RTC IP is based on the same RTCA3 IP as RZ/G3S
> (r9a08g045), with the following differences:
> - it lacks the time capture functionality
> - the maximum supported periodic interrupt frequency is 128Hz instead
>   of 256Hz
> - it requires two reset lines instead of one
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
      https://git.kernel.org/abelloni/c/8056f175606a
[2/4] rtc: renesas-rtca3: Add support for multiple reset lines
      https://git.kernel.org/abelloni/c/d034c9ca6a47

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com