Convert STMMAC PCI glue driver to use the generic platform
suspend/resume routines for PCI controllers, instead of implementing its
own one.

Signed-off-by: Yao Zi <ziyao@disroot.org>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  1 +
 .../net/ethernet/stmicro/stmmac/stmmac_pci.c  | 36 ++-----------------
 2 files changed, 4 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4b6911c62e6f..eec81f674857 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -382,6 +382,7 @@ config STMMAC_PCI
 	tristate "STMMAC PCI bus support"
 	depends on STMMAC_ETH && PCI
 	depends on COMMON_CLK
+	depends on STMMAC_LIBPCI
 	help
 	  This selects the platform specific bus support for the stmmac driver.
 	  This driver was tested on XLINX XC2V3000 FF1152AMT0221
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 94b3a3b27270..fa92be672c54 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -14,6 +14,7 @@
 #include <linux/dmi.h>
 
 #include "stmmac.h"
+#include "stmmac_libpci.h"
 
 struct stmmac_pci_info {
 	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
@@ -139,37 +140,6 @@ static const struct stmmac_pci_info snps_gmac5_pci_info = {
 	.setup = snps_gmac5_default_data,
 };
 
-static int stmmac_pci_suspend(struct device *dev, void *bsp_priv)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int ret;
-
-	ret = pci_save_state(pdev);
-	if (ret)
-		return ret;
-
-	pci_disable_device(pdev);
-	pci_wake_from_d3(pdev, true);
-	return 0;
-}
-
-static int stmmac_pci_resume(struct device *dev, void *bsp_priv)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int ret;
-
-	pci_restore_state(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-
-	pci_set_master(pdev);
-
-	return 0;
-}
-
 /**
  * stmmac_pci_probe
  *
@@ -249,8 +219,8 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 	plat->safety_feat_cfg->prtyen = 1;
 	plat->safety_feat_cfg->tmouten = 1;
 
-	plat->suspend = stmmac_pci_suspend;
-	plat->resume = stmmac_pci_resume;
+	plat->suspend = stmmac_pci_plat_suspend;
+	plat->resume = stmmac_pci_plat_resume;
 
 	return stmmac_dvr_probe(&pdev->dev, plat, &res);
 }
-- 
2.51.2