Fix missing supply for regulators TLV7103318QDSERQ1 and TPS22918DBVR.
Correct padconfig and gpio for TLV7103318QDSERQ1.

Reference Docs
Datasheet - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Schematics - https://www.ti.com/lit/zip/sprcal5

Fixes: 1544bca2f188e ("arm64: dts: ti: Add support for AM62D2-EVM")
Cc: stable@vger.kernel.org
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
---
Change log
	v1->v2: rebase to latest tag and added cc stable@vger.kernel.org

v1:https://lore.kernel.org/all/20250916090736.2299127-1-p-bhagat@ti.com/

Boot logs
https://gist.github.com/paresh-bhagat12/9a4a1aec5119ceedb386743921432c91

 arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
index 83af889e790a..d202484eec3f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
@@ -146,6 +146,7 @@ vdd_mmc1: regulator-4 {
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_sys>;
 		regulator-boot-on;
 		enable-active-high;
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
@@ -165,14 +166,16 @@ vcc_3v3_sys: regulator-5 {
 	};
 
 	vddshv_sdio: regulator-6 {
+		/* output of TLV7103318QDSERQ1 */
 		compatible = "regulator-gpio";
 		regulator-name = "vddshv_sdio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&vddshv_sdio_pins_default>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0>;
 		regulator-boot-on;
-		gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>;
+		gpios = <&main_gpio0 59 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
 		bootph-all;
@@ -334,7 +337,7 @@ AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
 
 	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
-			AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */
+			AM62DX_IOPAD(0x00f0, PIN_INPUT, 7) /* (Y21) GPIO0_59 */
 		>;
 		bootph-all;
 	};
-- 
2.34.1

Hi Paresh Bhagat,

On Wed, 29 Oct 2025 02:31:53 +0530, Paresh Bhagat wrote:
> Fix missing supply for regulators TLV7103318QDSERQ1 and TPS22918DBVR.
> Correct padconfig and gpio for TLV7103318QDSERQ1.
> 
> Reference Docs
> Datasheet - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
> Schematics - https://www.ti.com/lit/zip/sprcal5
> 
> [...]

I have applied the following to branch ti-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am62d2-evm: Fix regulator properties
      commit: 0103435072bf5c54bb43d1a9376d08396c825827

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh