1. Patchew
  2. linux
  3. [PATCH 00/13] media: i2c: Miscellaneous features and fixes for OV5647
  4. View patch

[PATCH 07/13] media: i2c: ov5647: Add support for regulator control.

Jai Luthra posted 13 patches 3 months, 2 weeks ago
There is a newer version of this series
[PATCH 07/13] media: i2c: ov5647: Add support for regulator control.
Posted by Jai Luthra 3 months, 2 weeks ago 
From: Dave Stevenson <dave.stevenson@raspberrypi.com>

The driver supported using GPIOs to control the shutdown line,
but no regulator control.

Add regulator hooks.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
 drivers/media/i2c/ov5647.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index a33e2d8edc114d302e830639cb7cb161f16a6208..598764638d518a28c8ac61ea590b996f09ecd45c 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/of_graph.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ctrls.h>
@@ -83,6 +84,15 @@
 #define OV5647_EXPOSURE_DEFAULT		1000
 #define OV5647_EXPOSURE_MAX		65535
 
+/* regulator supplies */
+static const char * const ov5647_supply_names[] = {
+	"avdd",		/* Analog power */
+	"dovdd",	/* Digital I/O power */
+	"dvdd",		/* Digital core power */
+};
+
+#define OV5647_NUM_SUPPLIES ARRAY_SIZE(ov5647_supply_names)
+
 struct regval_list {
 	u16 addr;
 	u8 data;
@@ -104,6 +114,7 @@ struct ov5647 {
 	struct mutex			lock;
 	struct clk			*xclk;
 	struct gpio_desc		*pwdn;
+	struct regulator_bulk_data supplies[OV5647_NUM_SUPPLIES];
 	bool				clock_ncont;
 	struct v4l2_ctrl_handler	ctrls;
 	const struct ov5647_mode	*mode;
@@ -781,6 +792,12 @@ static int ov5647_power_on(struct device *dev)
 
 	dev_dbg(dev, "OV5647 power on\n");
 
+	ret = regulator_bulk_enable(OV5647_NUM_SUPPLIES, sensor->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators\n");
+		return ret;
+	}
+
 	if (sensor->pwdn) {
 		gpiod_set_value_cansleep(sensor->pwdn, 0);
 		msleep(PWDN_ACTIVE_DELAY_MS);
@@ -812,6 +829,7 @@ static int ov5647_power_on(struct device *dev)
 	clk_disable_unprepare(sensor->xclk);
 error_pwdn:
 	gpiod_set_value_cansleep(sensor->pwdn, 1);
+	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
 
 	return ret;
 }
@@ -841,6 +859,7 @@ static int ov5647_power_off(struct device *dev)
 
 	clk_disable_unprepare(sensor->xclk);
 	gpiod_set_value_cansleep(sensor->pwdn, 1);
+	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
 
 	return 0;
 }
@@ -1341,6 +1360,18 @@ static const struct v4l2_ctrl_ops ov5647_ctrl_ops = {
 	.s_ctrl = ov5647_s_ctrl,
 };
 
+static int ov5647_configure_regulators(struct device *dev,
+				       struct ov5647 *sensor)
+{
+	unsigned int i;
+
+	for (i = 0; i < OV5647_NUM_SUPPLIES; i++)
+		sensor->supplies[i].supply = ov5647_supply_names[i];
+
+	return devm_regulator_bulk_get(dev, OV5647_NUM_SUPPLIES,
+				       sensor->supplies);
+}
+
 static int ov5647_init_controls(struct ov5647 *sensor, struct device *dev)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
@@ -1489,6 +1520,12 @@ static int ov5647_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
+	ret = ov5647_configure_regulators(dev, sensor);
+	if (ret) {
+		dev_err(dev, "Failed to get power regulators\n");
+		return ret;
+	}
+
 	mutex_init(&sensor->lock);
 
 	sensor->mode = OV5647_DEFAULT_MODE;

-- 
2.51.0
Re: [PATCH 07/13] media: i2c: ov5647: Add support for regulator control.
Posted by Stefan Wahren 3 months, 1 week ago 
Am 28.10.25 um 08:27 schrieb Jai Luthra:
> From: Dave Stevenson <dave.stevenson@raspberrypi.com>
>
> The driver supported using GPIOs to control the shutdown line,
> but no regulator control.
>
> Add regulator hooks.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
> ---
>   drivers/media/i2c/ov5647.c | 37 +++++++++++++++++++++++++++++++++++++
>   1 file changed, 37 insertions(+)
>
> diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> index a33e2d8edc114d302e830639cb7cb161f16a6208..598764638d518a28c8ac61ea590b996f09ecd45c 100644
> --- a/drivers/media/i2c/ov5647.c
> +++ b/drivers/media/i2c/ov5647.c
> @@ -20,6 +20,7 @@
>   #include <linux/module.h>
>   #include <linux/of_graph.h>
>   #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>   #include <linux/slab.h>
>   #include <linux/videodev2.h>
>   #include <media/v4l2-ctrls.h>
> @@ -83,6 +84,15 @@
>   #define OV5647_EXPOSURE_DEFAULT		1000
>   #define OV5647_EXPOSURE_MAX		65535
>   
> +/* regulator supplies */
> +static const char * const ov5647_supply_names[] = {
> +	"avdd",		/* Analog power */
> +	"dovdd",	/* Digital I/O power */
> +	"dvdd",		/* Digital core power */
> +};
> +
> +#define OV5647_NUM_SUPPLIES ARRAY_SIZE(ov5647_supply_names)
> +
>   struct regval_list {
>   	u16 addr;
>   	u8 data;
> @@ -104,6 +114,7 @@ struct ov5647 {
>   	struct mutex			lock;
>   	struct clk			*xclk;
>   	struct gpio_desc		*pwdn;
> +	struct regulator_bulk_data supplies[OV5647_NUM_SUPPLIES];
>   	bool				clock_ncont;
>   	struct v4l2_ctrl_handler	ctrls;
>   	const struct ov5647_mode	*mode;
> @@ -781,6 +792,12 @@ static int ov5647_power_on(struct device *dev)
>   
>   	dev_dbg(dev, "OV5647 power on\n");
>   
> +	ret = regulator_bulk_enable(OV5647_NUM_SUPPLIES, sensor->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enable regulators\n");
In case we want to log this, please add the return code as well
> +		return ret;
> +	}
> +
>   	if (sensor->pwdn) {
>   		gpiod_set_value_cansleep(sensor->pwdn, 0);
>   		msleep(PWDN_ACTIVE_DELAY_MS);
> @@ -812,6 +829,7 @@ static int ov5647_power_on(struct device *dev)
>   	clk_disable_unprepare(sensor->xclk);
>   error_pwdn:
>   	gpiod_set_value_cansleep(sensor->pwdn, 1);
> +	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
>   
>   	return ret;
>   }
> @@ -841,6 +859,7 @@ static int ov5647_power_off(struct device *dev)
>   
>   	clk_disable_unprepare(sensor->xclk);
>   	gpiod_set_value_cansleep(sensor->pwdn, 1);
> +	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
>   
>   	return 0;
>   }
> @@ -1341,6 +1360,18 @@ static const struct v4l2_ctrl_ops ov5647_ctrl_ops = {
>   	.s_ctrl = ov5647_s_ctrl,
>   };
>   
> +static int ov5647_configure_regulators(struct device *dev,
> +				       struct ov5647 *sensor)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < OV5647_NUM_SUPPLIES; i++)
> +		sensor->supplies[i].supply = ov5647_supply_names[i];
> +
> +	return devm_regulator_bulk_get(dev, OV5647_NUM_SUPPLIES,
> +				       sensor->supplies);
> +}
> +
>   static int ov5647_init_controls(struct ov5647 *sensor, struct device *dev)
>   {
>   	struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
> @@ -1489,6 +1520,12 @@ static int ov5647_probe(struct i2c_client *client)
>   		return -EINVAL;
>   	}
>   
> +	ret = ov5647_configure_regulators(dev, sensor);
> +	if (ret) {
> +		dev_err(dev, "Failed to get power regulators\n");
Please use dev_err_probe here
> +		return ret;
> +	}
> +
>   	mutex_init(&sensor->lock);
>   
>   	sensor->mode = OV5647_DEFAULT_MODE;
>
Re: [PATCH 07/13] media: i2c: ov5647: Add support for regulator control.
Posted by Jacopo Mondi 3 months, 1 week ago 
Hi Jai

On Tue, Oct 28, 2025 at 12:57:18PM +0530, Jai Luthra wrote:
> From: Dave Stevenson <dave.stevenson@raspberrypi.com>
>
> The driver supported using GPIOs to control the shutdown line,
> but no regulator control.
>
> Add regulator hooks.

Do bindings need an update ?

>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
> ---
>  drivers/media/i2c/ov5647.c | 37 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>
> diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> index a33e2d8edc114d302e830639cb7cb161f16a6208..598764638d518a28c8ac61ea590b996f09ecd45c 100644
> --- a/drivers/media/i2c/ov5647.c
> +++ b/drivers/media/i2c/ov5647.c
> @@ -20,6 +20,7 @@
>  #include <linux/module.h>
>  #include <linux/of_graph.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/videodev2.h>
>  #include <media/v4l2-ctrls.h>
> @@ -83,6 +84,15 @@
>  #define OV5647_EXPOSURE_DEFAULT		1000
>  #define OV5647_EXPOSURE_MAX		65535
>
> +/* regulator supplies */
> +static const char * const ov5647_supply_names[] = {
> +	"avdd",		/* Analog power */
> +	"dovdd",	/* Digital I/O power */
> +	"dvdd",		/* Digital core power */
> +};
> +
> +#define OV5647_NUM_SUPPLIES ARRAY_SIZE(ov5647_supply_names)
> +
>  struct regval_list {
>  	u16 addr;
>  	u8 data;
> @@ -104,6 +114,7 @@ struct ov5647 {
>  	struct mutex			lock;
>  	struct clk			*xclk;
>  	struct gpio_desc		*pwdn;
> +	struct regulator_bulk_data supplies[OV5647_NUM_SUPPLIES];

nit: please align 'supplies' to other members

>  	bool				clock_ncont;
>  	struct v4l2_ctrl_handler	ctrls;
>  	const struct ov5647_mode	*mode;
> @@ -781,6 +792,12 @@ static int ov5647_power_on(struct device *dev)
>
>  	dev_dbg(dev, "OV5647 power on\n");
>
> +	ret = regulator_bulk_enable(OV5647_NUM_SUPPLIES, sensor->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enable regulators\n");
> +		return ret;
> +	}
> +
>  	if (sensor->pwdn) {
>  		gpiod_set_value_cansleep(sensor->pwdn, 0);

Should we disable regulators if this fail ?

Also, gpiod_set_value_cansleep() supports optional gpios, so you might
want to remove if (sensor->pwdn), check the return value of this
function and jump to a new label

>  		msleep(PWDN_ACTIVE_DELAY_MS);
> @@ -812,6 +829,7 @@ static int ov5647_power_on(struct device *dev)
>  	clk_disable_unprepare(sensor->xclk);
>  error_pwdn:
>  	gpiod_set_value_cansleep(sensor->pwdn, 1);
> +	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
>
>  	return ret;
>  }
> @@ -841,6 +859,7 @@ static int ov5647_power_off(struct device *dev)
>
>  	clk_disable_unprepare(sensor->xclk);
>  	gpiod_set_value_cansleep(sensor->pwdn, 1);
> +	regulator_bulk_disable(OV5647_NUM_SUPPLIES, sensor->supplies);
>
>  	return 0;
>  }
> @@ -1341,6 +1360,18 @@ static const struct v4l2_ctrl_ops ov5647_ctrl_ops = {
>  	.s_ctrl = ov5647_s_ctrl,
>  };
>
> +static int ov5647_configure_regulators(struct device *dev,
> +				       struct ov5647 *sensor)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < OV5647_NUM_SUPPLIES; i++)

nit: you can now declared i inside the for loop

Thanks
  j

> +		sensor->supplies[i].supply = ov5647_supply_names[i];
> +
> +	return devm_regulator_bulk_get(dev, OV5647_NUM_SUPPLIES,
> +				       sensor->supplies);
> +}
> +
>  static int ov5647_init_controls(struct ov5647 *sensor, struct device *dev)
>  {
>  	struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
> @@ -1489,6 +1520,12 @@ static int ov5647_probe(struct i2c_client *client)
>  		return -EINVAL;
>  	}
>
> +	ret = ov5647_configure_regulators(dev, sensor);
> +	if (ret) {
> +		dev_err(dev, "Failed to get power regulators\n");
> +		return ret;
> +	}
> +
>  	mutex_init(&sensor->lock);
>
>  	sensor->mode = OV5647_DEFAULT_MODE;
>
> --
> 2.51.0
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.