This series adds support for some important features, like controls for
H/VFLIP, horizontal blanking, regulator controls etc. that are present
in the downstream raspberry pi kernel, to support their v1 camera
module.

Additionally, it also fixes some known issues with streaming lockups,
wrong pixel array size and compliance tests.

Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
Dave Stevenson (7):
      media: i2c: ov5647: Add support for regulator control.
      media: i2c: ov5647: Use v4l2_async_register_subdev_sensor for lens binding
      media: i2c: ov5647: Add control of V4L2_CID_HBLANK
      media: i2c: ov5647: Tidy up mode registers to make the order common
      media: i2c: ov5647: Separate out the common registers.
      media: i2c: ov5647: Use the same PLL config for full, 1080p, and binned modes
      media: i2c: ov5647: Add V4L2_CID_LINK_FREQUENCY control

David Plowman (5):
      media: i2c: ov5647: Correct pixel array offset
      media: i2c: ov5647: Correct minimum VBLANK value
      media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
      media: i2c: ov5647: Sensor should report RAW color space
      media: i2c: ov5647: Support HFLIP and VFLIP

Laurent Pinchart (1):
      media: i2c: ov5647: Parse and register properties

 drivers/media/i2c/ov5647.c | 447 ++++++++++++++++++++++-----------------------
 1 file changed, 216 insertions(+), 231 deletions(-)
---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20251024-b4-rpi-ov5647-05b600758762

Best regards,
-- 
Jai Luthra <jai.luthra@ideasonboard.com>