Add support for the RDI only CAMSS camera driver on Kaanapali. Enabling
RDI path involves adding the support for a set of CSIPHY, CSID and TFE
modules, with each TFE having multiple RDI ports. This hardware
architecture requires 'qdss_debug_xo' clock for CAMNOC to be functional.
Kaanapali camera sub system provides
- 3 x VFE, 5 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE Lite
- 3 x CSID
- 2 x CSID Lite
- 6 x CSI PHY
This series has been tested using the following commands with a
downstream driver for S5KJN5 sensor.
- media-ctl --reset
- media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F /dev/video0
Dependencies:
- https://lore.kernel.org/all/20251014-use-marco-to-denote-image-buffer-number-v1-1-f782e4cc622d@oss.qualcomm.com/
- https://lore.kernel.org/all/20251014-add-new-clock-in-vfe-matching-list-v1-1-0d965ccc8a3a@oss.qualcomm.com/
- https://lore.kernel.org/all/20251023-make-csiphy-status-macro-cross-platform-v1-1-5746446dfdc6@oss.qualcomm.com/
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
Changes in v4:
- Refactor kaanapali camss binding style and commit message - Krzysztof
- Link to v3: https://lore.kernel.org/r/20251023-add-support-for-camss-on-kaanapali-v3-0-02abc9a107bf@oss.qualcomm.com
Changes in v3:
- Use the name 'ahb' for 'cam_top_ahb' clock in cci binding file - Vladimir
- Reduce and simplify CSIPHY supply, port properties in camss bindings - Vladimir
- Resolve the dependency issues in the camss bindings file using ephemeral
DT nodes - Vladimir/Dmitry
- Update hf mnoc name and bandwidth values for icc module - bod
- Split CSIPHY status macro changes into a separate patch series - bod
- Add clear functions for AUP/RUP update in csid and vfe for consistency - bod
- Clarify why the RUP and AUP register update process is deferred - bod
- Clarify the necessity to keep NRT clocks for vfe - Vijay
- Link to v2: https://lore.kernel.org/r/20251014-add-support-for-camss-on-kaanapali-v2-0-f5745ba2dff9@oss.qualcomm.com
Changes in v2:
- Aggregate CSI2_RX_CFG0_PHY_SEL_BASE_IDX definition into 'camss-csid.h' - bod
- Remove 'camss-csid-1080.h' and use 'camss-csid-gen3.h' header instead - bod
- Remove redundant code in 'camss-csid-1080.c' and align the namespaces - bod
- Slipt 'camnoc_rt_axi' clock in vfe matching list into a single patch - bod
- Add whole vfe write engine client mappings in comment - bod
- Remove hardcoded image buffer number but use 'CAMSS_INIT_BUF_COUNT' - bod
- Remove SoC specific logic for vfe ops->reg_update and add a new variable
to determine whether ops->reg_update is deferred or not - bod
- Add description to explain why 'qdss_debug_xo' should be retained - bod
- Add the procss node in csiphy register list comment - bod
- Rename the variable 'cmn_status_offset' to 'common_status_offset' and
align this with macro in csiphy register structure to avoid ambiguity - bod
- Aggregate Kaanapali items into the definition that introduced by
'qcom,qcm2290-cci' in cci binding file - Loic
- Format 'kaanpali-camss.yaml' binding file
- Link to v1: https://lore.kernel.org/r/20250924-knp-cam-v1-0-b72d6deea054@oss.qualcomm.com
---
Hangxiang Ma (6):
dt-bindings: i2c: qcom-cci: Document Kaanapali compatible
media: dt-bindings: Add CAMSS device for Kaanapali
media: qcom: camss: Add Kaanapali compatible camss driver
media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
media: qcom: camss: csid: Add support for CSID 1080
media: qcom: camss: vfe: Add support for VFE 1080
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
.../bindings/media/qcom,kaanapali-camss.yaml | 406 +++++++++++++++++++++
drivers/media/platform/qcom/camss/Makefile | 2 +
.../media/platform/qcom/camss/camss-csid-1080.c | 382 +++++++++++++++++++
drivers/media/platform/qcom/camss/camss-csid-680.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen3.c | 1 -
drivers/media/platform/qcom/camss/camss-csid.h | 11 +-
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 124 +++++++
drivers/media/platform/qcom/camss/camss-vfe-1080.c | 197 ++++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 10 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
drivers/media/platform/qcom/camss/camss.c | 352 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
13 files changed, 1486 insertions(+), 5 deletions(-)
---
base-commit: b09b832c719df5e10f2560771fd38146f2b3fd7c
change-id: 20251008-add-support-for-camss-on-kaanapali-e5b6dbd5209e
prerequisite-change-id: 20251012-use-marco-to-denote-image-buffer-number-cbec071b8436:v1
prerequisite-patch-id: 3ac5d6703a9530eda884720c146b9444f90cf56b
prerequisite-change-id: 20251012-add-new-clock-in-vfe-matching-list-25fb1e378c49:v1
prerequisite-patch-id: aacb03b359fdf95977805f42918c0b6c39889e32
prerequisite-change-id: 20251021-make-csiphy-status-macro-cross-platform-5390dc128aee:v1
prerequisite-patch-id: 27c2ef96f0e747ec6b4bcf316d8802356e4cc3f4
Best regards,
--
Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>