Currently, the signal format of an associated output is not considered
during output pin registration. As a result, the driver registers output
pins that are disabled by the signal format configuration.

Fix this by calling zl3073x_output_pin_is_enabled() to check whether
a given output pin should be registered or not.

Fixes: 75a71ecc2412 ("dpll: zl3073x: Register DPLL devices and pins")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 drivers/dpll/zl3073x/dpll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dpll/zl3073x/dpll.c b/drivers/dpll/zl3073x/dpll.c
index 93dc93eec79e..f93f9a458324 100644
--- a/drivers/dpll/zl3073x/dpll.c
+++ b/drivers/dpll/zl3073x/dpll.c
@@ -1904,7 +1904,7 @@ zl3073x_dpll_pin_is_registrable(struct zl3073x_dpll *zldpll,
 		}
 
 		is_diff = zl3073x_out_is_diff(zldev, out);
-		is_enabled = zl3073x_out_is_enabled(zldev, out);
+		is_enabled = zl3073x_output_pin_is_enabled(zldev, index);
 	}
 
 	/* Skip N-pin if the corresponding input/output is differential */
-- 
2.51.0