include/linux/iio/imu/adis.h | 45 ++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 9 deletions(-)
Correct and add to adis.h to resolve all kernel-doc warnings:
- add a missing struct member description
- change one non-kernel-doc comment to use /* instead of /**
- correct function parameter @value to @val (7 locations)
- add function return value comments (13 locations)
Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo'
not described in 'adis_data'
Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc
format: * The state_lock is meant to be used during operations that
require
Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"'
not described in 'adis'
Warning: include/linux/iio/imu/adis.h:264 function parameter 'val'
not described in 'adis_write_reg'
Warning: include/linux/iio/imu/adis.h:371 No description found for
return value of 'adis_update_bits_base'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
---
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: linux-iio@vger.kernel.org
---
include/linux/iio/imu/adis.h | 45 ++++++++++++++++++++++++++-------
1 file changed, 36 insertions(+), 9 deletions(-)
--- linux-next-20251024.orig/include/linux/iio/imu/adis.h
+++ linux-next-20251024/include/linux/iio/imu/adis.h
@@ -57,6 +57,7 @@ struct adis_timeout {
* @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
* @unmasked_drdy: True for devices that cannot mask/unmask the data ready pin
* @has_paging: True if ADIS device has paged registers
+ * @has_fifo: True if ADIS device has a hardware FIFO
* @burst_reg_cmd: Register command that triggers burst
* @burst_len: Burst size in the SPI RX buffer. If @burst_max_len is defined,
* this should be the minimum size supported by the device.
@@ -136,7 +137,7 @@ struct adis {
const struct adis_data *data;
unsigned int burst_extra_len;
const struct adis_ops *ops;
- /**
+ /*
* The state_lock is meant to be used during operations that require
* a sequence of SPI R/W in order to protect the SPI transfer
* information (fields 'xfer', 'msg' & 'current_page') between
@@ -166,7 +167,7 @@ int __adis_reset(struct adis *adis);
* adis_reset() - Reset the device
* @adis: The adis device
*
- * Returns 0 on success, a negative error code otherwise
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_reset(struct adis *adis)
{
@@ -183,7 +184,9 @@ int __adis_read_reg(struct adis *adis, u
* __adis_write_reg_8() - Write single byte to a register (unlocked)
* @adis: The adis device
* @reg: The address of the register to be written
- * @value: The value to write
+ * @val: The value to write
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
u8 val)
@@ -195,7 +198,9 @@ static inline int __adis_write_reg_8(str
* __adis_write_reg_16() - Write 2 bytes to a pair of registers (unlocked)
* @adis: The adis device
* @reg: The address of the lower of the two registers
- * @value: Value to be written
+ * @val: Value to be written
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
u16 val)
@@ -207,7 +212,9 @@ static inline int __adis_write_reg_16(st
* __adis_write_reg_32() - write 4 bytes to four registers (unlocked)
* @adis: The adis device
* @reg: The address of the lower of the four register
- * @value: Value to be written
+ * @val: Value to be written
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
u32 val)
@@ -220,6 +227,8 @@ static inline int __adis_write_reg_32(st
* @adis: The adis device
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
u16 *val)
@@ -239,6 +248,8 @@ static inline int __adis_read_reg_16(str
* @adis: The adis device
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
u32 *val)
@@ -257,8 +268,10 @@ static inline int __adis_read_reg_32(str
* adis_write_reg() - write N bytes to register
* @adis: The adis device
* @reg: The address of the lower of the two registers
- * @value: The value to write to device (up to 4 bytes)
+ * @val: The value to write to device (up to 4 bytes)
* @size: The size of the @value (in bytes)
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_write_reg(struct adis *adis, unsigned int reg,
unsigned int val, unsigned int size)
@@ -273,6 +286,8 @@ static inline int adis_write_reg(struct
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
* @size: The size of the @val buffer
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static int adis_read_reg(struct adis *adis, unsigned int reg,
unsigned int *val, unsigned int size)
@@ -285,7 +300,9 @@ static int adis_read_reg(struct adis *ad
* adis_write_reg_8() - Write single byte to a register
* @adis: The adis device
* @reg: The address of the register to be written
- * @value: The value to write
+ * @val: The value to write
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
u8 val)
@@ -297,7 +314,9 @@ static inline int adis_write_reg_8(struc
* adis_write_reg_16() - Write 2 bytes to a pair of registers
* @adis: The adis device
* @reg: The address of the lower of the two registers
- * @value: Value to be written
+ * @val: Value to be written
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
u16 val)
@@ -309,7 +328,9 @@ static inline int adis_write_reg_16(stru
* adis_write_reg_32() - write 4 bytes to four registers
* @adis: The adis device
* @reg: The address of the lower of the four register
- * @value: Value to be written
+ * @val: Value to be written
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
u32 val)
@@ -322,6 +343,8 @@ static inline int adis_write_reg_32(stru
* @adis: The adis device
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
u16 *val)
@@ -341,6 +364,8 @@ static inline int adis_read_reg_16(struc
* @adis: The adis device
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
u32 *val)
@@ -366,6 +391,8 @@ int __adis_update_bits_base(struct adis
* @size: Size of the register to update
*
* Updates the desired bits of @reg in accordance with @mask and @val.
+ *
+ * Returns: %0 on success, a negative error code otherwise
*/
static inline int adis_update_bits_base(struct adis *adis, unsigned int reg,
const u32 mask, const u32 val, u8 size)
On Sat, 2025-10-25 at 19:47 -0700, Randy Dunlap wrote:
> Correct and add to adis.h to resolve all kernel-doc warnings:
>
> - add a missing struct member description
> - change one non-kernel-doc comment to use /* instead of /**
> - correct function parameter @value to @val (7 locations)
> - add function return value comments (13 locations)
>
> Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo'
> not described in 'adis_data'
> Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc
> format: * The state_lock is meant to be used during operations that
> require
> Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"'
> not described in 'adis'
> Warning: include/linux/iio/imu/adis.h:264 function parameter 'val'
> not described in 'adis_write_reg'
> Warning: include/linux/iio/imu/adis.h:371 No description found for
> return value of 'adis_update_bits_base'
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> ---
Thanks!
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Cc: Jonathan Cameron <jic23@kernel.org>
> Cc: David Lechner <dlechner@baylibre.com>
> Cc: Nuno Sá <nuno.sa@analog.com>
> Cc: Andy Shevchenko <andy@kernel.org>
> Cc: linux-iio@vger.kernel.org
> ---
> include/linux/iio/imu/adis.h | 45 ++++++++++++++++++++++++++-------
> 1 file changed, 36 insertions(+), 9 deletions(-)
>
> --- linux-next-20251024.orig/include/linux/iio/imu/adis.h
> +++ linux-next-20251024/include/linux/iio/imu/adis.h
> @@ -57,6 +57,7 @@ struct adis_timeout {
> * @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
> * @unmasked_drdy: True for devices that cannot mask/unmask the data ready
> pin
> * @has_paging: True if ADIS device has paged registers
> + * @has_fifo: True if ADIS device has a hardware FIFO
> * @burst_reg_cmd: Register command that triggers burst
> * @burst_len: Burst size in the SPI RX buffer. If @burst_max_len is
> defined,
> * this should be the minimum size supported by the
> device.
> @@ -136,7 +137,7 @@ struct adis {
> const struct adis_data *data;
> unsigned int burst_extra_len;
> const struct adis_ops *ops;
> - /**
> + /*
> * The state_lock is meant to be used during operations that require
> * a sequence of SPI R/W in order to protect the SPI transfer
> * information (fields 'xfer', 'msg' & 'current_page') between
> @@ -166,7 +167,7 @@ int __adis_reset(struct adis *adis);
> * adis_reset() - Reset the device
> * @adis: The adis device
> *
> - * Returns 0 on success, a negative error code otherwise
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_reset(struct adis *adis)
> {
> @@ -183,7 +184,9 @@ int __adis_read_reg(struct adis *adis, u
> * __adis_write_reg_8() - Write single byte to a register (unlocked)
> * @adis: The adis device
> * @reg: The address of the register to be written
> - * @value: The value to write
> + * @val: The value to write
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
> u8 val)
> @@ -195,7 +198,9 @@ static inline int __adis_write_reg_8(str
> * __adis_write_reg_16() - Write 2 bytes to a pair of registers (unlocked)
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> - * @value: Value to be written
> + * @val: Value to be written
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
> u16 val)
> @@ -207,7 +212,9 @@ static inline int __adis_write_reg_16(st
> * __adis_write_reg_32() - write 4 bytes to four registers (unlocked)
> * @adis: The adis device
> * @reg: The address of the lower of the four register
> - * @value: Value to be written
> + * @val: Value to be written
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
> u32 val)
> @@ -220,6 +227,8 @@ static inline int __adis_write_reg_32(st
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> * @val: The value read back from the device
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
> u16 *val)
> @@ -239,6 +248,8 @@ static inline int __adis_read_reg_16(str
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> * @val: The value read back from the device
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
> u32 *val)
> @@ -257,8 +268,10 @@ static inline int __adis_read_reg_32(str
> * adis_write_reg() - write N bytes to register
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> - * @value: The value to write to device (up to 4 bytes)
> + * @val: The value to write to device (up to 4 bytes)
> * @size: The size of the @value (in bytes)
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_write_reg(struct adis *adis, unsigned int reg,
> unsigned int val, unsigned int size)
> @@ -273,6 +286,8 @@ static inline int adis_write_reg(struct
> * @reg: The address of the lower of the two registers
> * @val: The value read back from the device
> * @size: The size of the @val buffer
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static int adis_read_reg(struct adis *adis, unsigned int reg,
> unsigned int *val, unsigned int size)
> @@ -285,7 +300,9 @@ static int adis_read_reg(struct adis *ad
> * adis_write_reg_8() - Write single byte to a register
> * @adis: The adis device
> * @reg: The address of the register to be written
> - * @value: The value to write
> + * @val: The value to write
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
> u8 val)
> @@ -297,7 +314,9 @@ static inline int adis_write_reg_8(struc
> * adis_write_reg_16() - Write 2 bytes to a pair of registers
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> - * @value: Value to be written
> + * @val: Value to be written
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
> u16 val)
> @@ -309,7 +328,9 @@ static inline int adis_write_reg_16(stru
> * adis_write_reg_32() - write 4 bytes to four registers
> * @adis: The adis device
> * @reg: The address of the lower of the four register
> - * @value: Value to be written
> + * @val: Value to be written
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
> u32 val)
> @@ -322,6 +343,8 @@ static inline int adis_write_reg_32(stru
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> * @val: The value read back from the device
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
> u16 *val)
> @@ -341,6 +364,8 @@ static inline int adis_read_reg_16(struc
> * @adis: The adis device
> * @reg: The address of the lower of the two registers
> * @val: The value read back from the device
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
> u32 *val)
> @@ -366,6 +391,8 @@ int __adis_update_bits_base(struct adis
> * @size: Size of the register to update
> *
> * Updates the desired bits of @reg in accordance with @mask and @val.
> + *
> + * Returns: %0 on success, a negative error code otherwise
> */
> static inline int adis_update_bits_base(struct adis *adis, unsigned int reg,
> const u32 mask, const u32 val, u8
> size)
On Mon, 27 Oct 2025 13:03:54 +0000 Nuno Sá <noname.nuno@gmail.com> wrote: > On Sat, 2025-10-25 at 19:47 -0700, Randy Dunlap wrote: > > Correct and add to adis.h to resolve all kernel-doc warnings: > > > > - add a missing struct member description > > - change one non-kernel-doc comment to use /* instead of /** > > - correct function parameter @value to @val (7 locations) > > - add function return value comments (13 locations) > > > > Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo' > > not described in 'adis_data' > > Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc > > format: * The state_lock is meant to be used during operations that > > require > > Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"' > > not described in 'adis' > > Warning: include/linux/iio/imu/adis.h:264 function parameter 'val' > > not described in 'adis_write_reg' > > Warning: include/linux/iio/imu/adis.h:371 No description found for > > return value of 'adis_update_bits_base' > > > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org> > > --- > > Thanks! > > Reviewed-by: Nuno Sá <nuno.sa@analog.com> Applied. Thanks. Jonathan
On Sat, Oct 25, 2025 at 07:47:59PM -0700, Randy Dunlap wrote: > Correct and add to adis.h to resolve all kernel-doc warnings: > > - add a missing struct member description > - change one non-kernel-doc comment to use /* instead of /** > - correct function parameter @value to @val (7 locations) > - add function return value comments (13 locations) > > Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo' > not described in 'adis_data' > Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc > format: * The state_lock is meant to be used during operations that > require > Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"' > not described in 'adis' > Warning: include/linux/iio/imu/adis.h:264 function parameter 'val' > not described in 'adis_write_reg' > Warning: include/linux/iio/imu/adis.h:371 No description found for > return value of 'adis_update_bits_base' Thanks for fixing all these, Randy! Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> -- With Best Regards, Andy Shevchenko
© 2016 - 2026 Red Hat, Inc.