Enable SD Card host controller for sm8750 mtp board.

Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 3bbb53b7c71f..a8727d353b46 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -1030,6 +1030,22 @@ &remoteproc_mpss {
 	status = "fail";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>;
+	pinctrl-1 = <&sdc2_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
 &swr0 {
 	status = "okay";
 
-- 
2.34.1

On 25-10-23 16:59:23, Sarthak Garg wrote:
> Enable SD Card host controller for sm8750 mtp board.
> 
> Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>

with the card detect gpio added here ...

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>