1. Patchew
  2. linux
  3. [PATCH net-next v3 0/5] net: macb: EyeQ5 support
  4. View patch

[PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible

Théo Lebrun posted 5 patches 3 months, 2 weeks ago
[PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible
Posted by Théo Lebrun 3 months, 2 weeks ago 
Add support for the two GEM instances inside Mobileye EyeQ5 SoCs, using
compatible "mobileye,eyeq5-gem". With it, add a custom init sequence
that must grab a generic PHY and initialise it.

We use bp->phy in both RGMII and SGMII cases. Tell our mode by adding a
phy_set_mode_ext() during macb_open(), before phy_power_on(). We are
the first users of bp->phy that use it in non-SGMII cases.

The phy_set_mode_ext() call is made unconditionally. It cannot cause
issues on platforms where !bp->phy or !bp->phy->ops->set_mode as, in
those cases, the call is a no-op (returning zero). From reading
upstream DTS, we can figure out that no platform has a bp->phy and a
PHY driver that has a .set_mode() implementation:
 - cdns,zynqmp-gem: no DTS upstream.
 - microchip,mpfs-macb: microchip/mpfs.dtsi, &mac0..1, no PHY attached.
 - xlnx,versal-gem: xilinx/versal-net.dtsi, &gem0..1, no PHY attached.
 - xlnx,zynqmp-gem: xilinx/zynqmp.dtsi, &gem0..3, PHY attached to
   drivers/phy/xilinx/phy-zynqmp.c which has no .set_mode().

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/net/ethernet/cadence/macb_main.c | 38 ++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 44188e7eee56..b1ed98d9c438 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2965,6 +2965,10 @@ static int macb_open(struct net_device *dev)
 
 	macb_init_hw(bp);
 
+	err = phy_set_mode_ext(bp->phy, PHY_MODE_ETHERNET, bp->phy_interface);
+	if (err)
+		goto reset_hw;
+
 	err = phy_power_on(bp->phy);
 	if (err)
 		goto reset_hw;
@@ -5189,6 +5193,28 @@ static int init_reset_optional(struct platform_device *pdev)
 	return ret;
 }
 
+static int eyeq5_init(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct macb *bp = netdev_priv(netdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	bp->phy = devm_phy_get(dev, NULL);
+	if (IS_ERR(bp->phy))
+		return dev_err_probe(dev, PTR_ERR(bp->phy),
+				     "failed to get PHY\n");
+
+	ret = phy_init(bp->phy);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to init PHY\n");
+
+	ret = macb_init(pdev);
+	if (ret)
+		phy_exit(bp->phy);
+	return ret;
+}
+
 static const struct macb_usrio_config sama7g5_usrio = {
 	.mii = 0,
 	.rmii = 1,
@@ -5343,6 +5369,17 @@ static const struct macb_config versal_config = {
 	.usrio = &macb_default_usrio,
 };
 
+static const struct macb_config eyeq5_config = {
+	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
+		MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_QUEUE_DISABLE |
+		MACB_CAPS_NO_LSO,
+	.dma_burst_length = 16,
+	.clk_init = macb_clk_init,
+	.init = eyeq5_init,
+	.jumbo_max_len = 10240,
+	.usrio = &macb_default_usrio,
+};
+
 static const struct macb_config raspberrypi_rp1_config = {
 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
 		MACB_CAPS_JUMBO |
@@ -5374,6 +5411,7 @@ static const struct of_device_id macb_dt_ids[] = {
 	{ .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
 	{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
 	{ .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
+	{ .compatible = "mobileye,eyeq5-gem", .data = &eyeq5_config },
 	{ .compatible = "raspberrypi,rp1-gem", .data = &raspberrypi_rp1_config },
 	{ .compatible = "xlnx,zynqmp-gem", .data = &zynqmp_config},
 	{ .compatible = "xlnx,zynq-gem", .data = &zynq_config },

-- 
2.51.1
Re: [PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible
Posted by Nicolas Ferre 3 months, 1 week ago 
On 23/10/2025 at 18:22, Théo Lebrun wrote:
> Add support for the two GEM instances inside Mobileye EyeQ5 SoCs, using
> compatible "mobileye,eyeq5-gem". With it, add a custom init sequence
> that must grab a generic PHY and initialise it.
> 
> We use bp->phy in both RGMII and SGMII cases. Tell our mode by adding a
> phy_set_mode_ext() during macb_open(), before phy_power_on(). We are
> the first users of bp->phy that use it in non-SGMII cases.
> 
> The phy_set_mode_ext() call is made unconditionally. It cannot cause
> issues on platforms where !bp->phy or !bp->phy->ops->set_mode as, in
> those cases, the call is a no-op (returning zero). From reading
> upstream DTS, we can figure out that no platform has a bp->phy and a
> PHY driver that has a .set_mode() implementation:
>   - cdns,zynqmp-gem: no DTS upstream.
>   - microchip,mpfs-macb: microchip/mpfs.dtsi, &mac0..1, no PHY attached.
>   - xlnx,versal-gem: xilinx/versal-net.dtsi, &gem0..1, no PHY attached.
>   - xlnx,zynqmp-gem: xilinx/zynqmp.dtsi, &gem0..3, PHY attached to
>     drivers/phy/xilinx/phy-zynqmp.c which has no .set_mode().
> 
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Looks good to me, thanks:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Best regards,
   Nicolas

> ---
>   drivers/net/ethernet/cadence/macb_main.c | 38 ++++++++++++++++++++++++++++++++
>   1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 44188e7eee56..b1ed98d9c438 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -2965,6 +2965,10 @@ static int macb_open(struct net_device *dev)
> 
>          macb_init_hw(bp);
> 
> +       err = phy_set_mode_ext(bp->phy, PHY_MODE_ETHERNET, bp->phy_interface);
> +       if (err)
> +               goto reset_hw;
> +
>          err = phy_power_on(bp->phy);
>          if (err)
>                  goto reset_hw;
> @@ -5189,6 +5193,28 @@ static int init_reset_optional(struct platform_device *pdev)
>          return ret;
>   }
> 
> +static int eyeq5_init(struct platform_device *pdev)
> +{
> +       struct net_device *netdev = platform_get_drvdata(pdev);
> +       struct macb *bp = netdev_priv(netdev);
> +       struct device *dev = &pdev->dev;
> +       int ret;
> +
> +       bp->phy = devm_phy_get(dev, NULL);
> +       if (IS_ERR(bp->phy))
> +               return dev_err_probe(dev, PTR_ERR(bp->phy),
> +                                    "failed to get PHY\n");
> +
> +       ret = phy_init(bp->phy);
> +       if (ret)
> +               return dev_err_probe(dev, ret, "failed to init PHY\n");
> +
> +       ret = macb_init(pdev);
> +       if (ret)
> +               phy_exit(bp->phy);
> +       return ret;
> +}
> +
>   static const struct macb_usrio_config sama7g5_usrio = {
>          .mii = 0,
>          .rmii = 1,
> @@ -5343,6 +5369,17 @@ static const struct macb_config versal_config = {
>          .usrio = &macb_default_usrio,
>   };
> 
> +static const struct macb_config eyeq5_config = {
> +       .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
> +               MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_QUEUE_DISABLE |
> +               MACB_CAPS_NO_LSO,
> +       .dma_burst_length = 16,
> +       .clk_init = macb_clk_init,
> +       .init = eyeq5_init,
> +       .jumbo_max_len = 10240,
> +       .usrio = &macb_default_usrio,
> +};
> +
>   static const struct macb_config raspberrypi_rp1_config = {
>          .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
>                  MACB_CAPS_JUMBO |
> @@ -5374,6 +5411,7 @@ static const struct of_device_id macb_dt_ids[] = {
>          { .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
>          { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
>          { .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
> +       { .compatible = "mobileye,eyeq5-gem", .data = &eyeq5_config },
>          { .compatible = "raspberrypi,rp1-gem", .data = &raspberrypi_rp1_config },
>          { .compatible = "xlnx,zynqmp-gem", .data = &zynqmp_config},
>          { .compatible = "xlnx,zynq-gem", .data = &zynq_config },
> 
> --
> 2.51.1
>
Re: [PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible
Posted by Andrew Lunn 3 months, 2 weeks ago 
On Thu, Oct 23, 2025 at 06:22:55PM +0200, Théo Lebrun wrote:
> Add support for the two GEM instances inside Mobileye EyeQ5 SoCs, using
> compatible "mobileye,eyeq5-gem". With it, add a custom init sequence
> that must grab a generic PHY and initialise it.
> 
> We use bp->phy in both RGMII and SGMII cases. Tell our mode by adding a
> phy_set_mode_ext() during macb_open(), before phy_power_on(). We are
> the first users of bp->phy that use it in non-SGMII cases.
> 
> The phy_set_mode_ext() call is made unconditionally. It cannot cause
> issues on platforms where !bp->phy or !bp->phy->ops->set_mode as, in
> those cases, the call is a no-op (returning zero). From reading
> upstream DTS, we can figure out that no platform has a bp->phy and a
> PHY driver that has a .set_mode() implementation:
>  - cdns,zynqmp-gem: no DTS upstream.
>  - microchip,mpfs-macb: microchip/mpfs.dtsi, &mac0..1, no PHY attached.
>  - xlnx,versal-gem: xilinx/versal-net.dtsi, &gem0..1, no PHY attached.
>  - xlnx,zynqmp-gem: xilinx/zynqmp.dtsi, &gem0..3, PHY attached to
>    drivers/phy/xilinx/phy-zynqmp.c which has no .set_mode().
> 
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.