From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>

Enable USB support on SM8750 MTP variants.  The current definition will
start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[Konrad: Suggestion to flatten DT]
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 3bbb53b7c71f..1b526d96fba8 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -1200,3 +1200,25 @@ &ufs_mem_hc {
 
 	status = "okay";
 };
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
-- 
2.34.1