Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.

On systems without UEFI the write to the debugfs file will
return an error.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
Changes since V1:
- Rebased onto the new debugfs callback implementation
- Only code change since V1 is to increase the size of the local
  char array buf[].

 include/sound/cs35l56.h           |  1 +
 sound/soc/codecs/cs35l56-shared.c | 21 ++++++++++++++++++---
 2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
index 349b896ee737..82559be0f249 100644
--- a/include/sound/cs35l56.h
+++ b/include/sound/cs35l56.h
@@ -321,6 +321,7 @@ struct cs35l56_base {
 	bool can_hibernate;
 	bool cal_data_valid;
 	s8 cal_index;
+	u8 num_amps;
 	struct cirrus_amp_cal_data cal_data;
 	struct gpio_desc *reset_gpio;
 	struct cs35l56_spi_payload *spi_payload_buf;
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index eeb830e3f743..bbacac6bda81 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -1105,9 +1105,9 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base,
 					const char __user *from, size_t count,
 					loff_t *ppos)
 {
-	static const char * const options[] = { "factory" };
-	char buf[8] = { 0 };
-	int ret;
+	static const char * const options[] = { "factory", "store_uefi" };
+	char buf[11] = { 0 };
+	int num_amps, ret;
 
 	if (!IS_ENABLED(CONFIG_SND_SOC_CS35L56_CAL_DEBUGFS_COMMON))
 		return -ENXIO;
@@ -1125,6 +1125,21 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base,
 		if (ret < 0)
 			return ret;
 		break;
+	case 1:
+		if (!cs35l56_base->cal_data_valid)
+			return -ENODATA;
+
+		num_amps = cs35l56_base->num_amps;
+		if (num_amps == 0)
+			num_amps = -1;
+
+		ret = cs_amp_set_efi_calibration_data(cs35l56_base->dev,
+						      cs35l56_base->cal_index,
+						      num_amps,
+						      &cs35l56_base->cal_data);
+		if (ret < 0)
+			return ret;
+		break;
 	default:
 		return -ENXIO;
 	}
-- 
2.47.3