1. Patchew
  2. linux
  3. [PATCH 0/8] spi: enable the SpacemiT K1 SoC QSPI
  4. View patch

[PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC

Alex Elder posted 8 patches 3 months, 2 weeks ago
There is a newer version of this series
[PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC
Posted by Alex Elder 3 months, 2 weeks ago 
Allow the SPI_FSL_QUADSPI Kconfig option to be selected if
ARCH_SPACEMIT enabled.

Add support for the SpacemiT K1 SoC in the Freescale QSPI driver
by defining the device type data for its QSPI implementation.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 drivers/spi/Kconfig        |  3 ++-
 drivers/spi/spi-fsl-qspi.c | 10 ++++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4d8f00c850c14..2e3d8bd06ceb2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -435,7 +435,8 @@ config SPI_FSL_LPSPI
 
 config SPI_FSL_QUADSPI
 	tristate "Freescale QSPI controller"
-	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \
+			ARCH_SPACEMIT || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables support for the Quad SPI controller in master mode.
diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
index 9ecb756b33dba..f4f9cf127d3fe 100644
--- a/drivers/spi/spi-fsl-qspi.c
+++ b/drivers/spi/spi-fsl-qspi.c
@@ -267,6 +267,15 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
 	.little_endian = true,
 };
 
+static const struct fsl_qspi_devtype_data spacemit_k1_data = {
+	.rxfifo = SZ_128,
+	.txfifo = SZ_256,
+	.ahb_buf_size = SZ_512,
+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
+	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_NO_CLK_DISABLE,
+	.little_endian = true,
+};
+
 struct fsl_qspi {
 	void __iomem *iobase;
 	void __iomem *ahb_addr;
@@ -998,6 +1007,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
 	{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
 	{ .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
 	{ .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
+	{ .compatible = "spacemit,k1-qspi", .data = &spacemit_k1_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
-- 
2.48.1
Re: [PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC
Posted by Frank Li 3 months, 2 weeks ago 
On Mon, Oct 20, 2025 at 11:51:49AM -0500, Alex Elder wrote:
> Allow the SPI_FSL_QUADSPI Kconfig option to be selected if
> ARCH_SPACEMIT enabled.
>
> Add support for the SpacemiT K1 SoC in the Freescale QSPI driver
> by defining the device type data for its QSPI implementation.
>
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
>  drivers/spi/Kconfig        |  3 ++-
>  drivers/spi/spi-fsl-qspi.c | 10 ++++++++++
>  2 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 4d8f00c850c14..2e3d8bd06ceb2 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -435,7 +435,8 @@ config SPI_FSL_LPSPI
>
>  config SPI_FSL_QUADSPI
>  	tristate "Freescale QSPI controller"
> -	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
> +	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \
> +			ARCH_SPACEMIT || COMPILE_TEST
		   ^
		   align to here

Frank

>  	depends on HAS_IOMEM
>  	help
>  	  This enables support for the Quad SPI controller in master mode.
> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
> index 9ecb756b33dba..f4f9cf127d3fe 100644
> --- a/drivers/spi/spi-fsl-qspi.c
> +++ b/drivers/spi/spi-fsl-qspi.c
> @@ -267,6 +267,15 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
>  	.little_endian = true,
>  };
>
> +static const struct fsl_qspi_devtype_data spacemit_k1_data = {
> +	.rxfifo = SZ_128,
> +	.txfifo = SZ_256,
> +	.ahb_buf_size = SZ_512,
> +	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
> +	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_NO_CLK_DISABLE,
> +	.little_endian = true,
> +};
> +
>  struct fsl_qspi {
>  	void __iomem *iobase;
>  	void __iomem *ahb_addr;
> @@ -998,6 +1007,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
>  	{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
>  	{ .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
>  	{ .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
> +	{ .compatible = "spacemit,k1-qspi", .data = &spacemit_k1_data, },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
> --
> 2.48.1
>
Re: [PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC
Posted by Alex Elder 3 months, 2 weeks ago 
On 10/20/25 2:23 PM, Frank Li wrote:
> On Mon, Oct 20, 2025 at 11:51:49AM -0500, Alex Elder wrote:
>> Allow the SPI_FSL_QUADSPI Kconfig option to be selected if
>> ARCH_SPACEMIT enabled.
>>
>> Add support for the SpacemiT K1 SoC in the Freescale QSPI driver
>> by defining the device type data for its QSPI implementation.
>>
>> Signed-off-by: Alex Elder <elder@riscstar.com>
>> ---
>>   drivers/spi/Kconfig        |  3 ++-
>>   drivers/spi/spi-fsl-qspi.c | 10 ++++++++++
>>   2 files changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
>> index 4d8f00c850c14..2e3d8bd06ceb2 100644
>> --- a/drivers/spi/Kconfig
>> +++ b/drivers/spi/Kconfig
>> @@ -435,7 +435,8 @@ config SPI_FSL_LPSPI
>>
>>   config SPI_FSL_QUADSPI
>>   	tristate "Freescale QSPI controller"
>> -	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
>> +	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \
>> +			ARCH_SPACEMIT || COMPILE_TEST
> 		   ^
> 		   align to here

OK.  I was mimicking what I saw on the only other instances of
a continued line in the file, SPI_BCM_QSPI.

					-Alex

> 
> Frank
> 
>>   	depends on HAS_IOMEM
>>   	help
>>   	  This enables support for the Quad SPI controller in master mode.
>> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
>> index 9ecb756b33dba..f4f9cf127d3fe 100644
>> --- a/drivers/spi/spi-fsl-qspi.c
>> +++ b/drivers/spi/spi-fsl-qspi.c
>> @@ -267,6 +267,15 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
>>   	.little_endian = true,
>>   };
>>
>> +static const struct fsl_qspi_devtype_data spacemit_k1_data = {
>> +	.rxfifo = SZ_128,
>> +	.txfifo = SZ_256,
>> +	.ahb_buf_size = SZ_512,
>> +	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
>> +	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_NO_CLK_DISABLE,
>> +	.little_endian = true,
>> +};
>> +
>>   struct fsl_qspi {
>>   	void __iomem *iobase;
>>   	void __iomem *ahb_addr;
>> @@ -998,6 +1007,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
>>   	{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
>>   	{ .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
>>   	{ .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
>> +	{ .compatible = "spacemit,k1-qspi", .data = &spacemit_k1_data, },
>>   	{ /* sentinel */ }
>>   };
>>   MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
>> --
>> 2.48.1
>>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.