Documentation/gpu/vkms.rst | 42 +- drivers/gpu/drm/vkms/tests/vkms_config_test.c | 18 + drivers/gpu/drm/vkms/vkms_config.c | 183 ++++++ drivers/gpu/drm/vkms/vkms_config.h | 524 +++++++++++++++ drivers/gpu/drm/vkms/vkms_configfs.c | 893 +++++++++++++++++++++++++- drivers/gpu/drm/vkms/vkms_connector.c | 137 +++- drivers/gpu/drm/vkms/vkms_connector.h | 36 +- drivers/gpu/drm/vkms/vkms_crtc.c | 11 +- drivers/gpu/drm/vkms/vkms_drv.h | 6 +- drivers/gpu/drm/vkms/vkms_output.c | 19 +- drivers/gpu/drm/vkms/vkms_plane.c | 73 +-- 11 files changed, 1865 insertions(+), 77 deletions(-)
VKMS have a wide range of options. The aim of this series is to introduce
many configfs attribute so VKMS can be used to test a wide range of
configurations.
This series depends on [1] that should be applied soon.
PATCH 1-13 are for configuring planes
- name
- rotation
- color encoding
- color range
- plane formats
- zpos
PATCH 14-19 are for configuring the connector
- type
- supported colorspace
- edid
PATCH 20-22 are to enable dynamic connectors
[1]:https://lore.kernel.org/all/20251016175618.10051-1-jose.exposito89@gmail.com
PS: Each pair of config/configfs patch are independant. I could
technically create ≈10 different series, but there will be a lot of
(trivial) conflicts between them. I will be happy to reordoer, split and
partially apply this series to help the review process.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
---
Louis Chauvet (22):
drm/vkms: Introduce config for plane name
drm/vkms: Introduce configfs for plane name
drm/vkms: Introduce config for plane rotation
drm/vkms: Introduce configfs for plane rotation
drm/vkms: Introduce config for plane color encoding
drm/vkms: Introduce configfs for plane color encoding
drm/vkms: Introduce config for plane color range
drm/vkms: Introduce configfs for plane color range
drm/vkms: Introduce config for plane format
drm/vkms: Introduce configfs for plane format
drm/vkms: Properly render plane using their zpos
drm/vkms: Introduce config for plane zpos property
drm/vkms: Introduce configfs for plane zpos property
drm/vkms: Introduce config for connector type
drm/vkms: Introduce configfs for connector type
drm/vkms: Introduce config for connector supported colorspace
drm/vkms: Introduce configfs for connector supported colorspace
drm/vkms: Introduce config for connector EDID
drm/vkms: Introduce configfs for connector EDID
drm/vkms: Store the enabled/disabled status for connector
drm/vkms: Allow to hot-add connectors
drm/vkms: Allows the creation of connector at runtime
Documentation/gpu/vkms.rst | 42 +-
drivers/gpu/drm/vkms/tests/vkms_config_test.c | 18 +
drivers/gpu/drm/vkms/vkms_config.c | 183 ++++++
drivers/gpu/drm/vkms/vkms_config.h | 524 +++++++++++++++
drivers/gpu/drm/vkms/vkms_configfs.c | 893 +++++++++++++++++++++++++-
drivers/gpu/drm/vkms/vkms_connector.c | 137 +++-
drivers/gpu/drm/vkms/vkms_connector.h | 36 +-
drivers/gpu/drm/vkms/vkms_crtc.c | 11 +-
drivers/gpu/drm/vkms/vkms_drv.h | 6 +-
drivers/gpu/drm/vkms/vkms_output.c | 19 +-
drivers/gpu/drm/vkms/vkms_plane.c | 73 +--
11 files changed, 1865 insertions(+), 77 deletions(-)
---
base-commit: b291e4f1a4951204ce858cd01801291d34962a33
change-id: 20251017-vkms-all-config-bd0c2a01846f
prerequisite-message-id: 20251016175618.10051-1-jose.exposito89@gmail.com
prerequisite-patch-id: 74083a8806b1f26d9b4cd2a5107c756b971c4d11
prerequisite-patch-id: f982390487699921b625b413e8460d67ca7a74c9
prerequisite-patch-id: 0afca639e43c8fbfea2af1bc395e489efc8e1f10
prerequisite-patch-id: 6285108b2fd90d30d15d4cb4fdddfef953fad51b
prerequisite-patch-id: 2eacf5ad4f25f54a60958aa7a2df633d5642ce2f
prerequisite-patch-id: 81e98ac3aeb3b6128098ab7bab56d3446a3a2705
prerequisite-patch-id: 973f94c4edb4a5822c84a57d4479ca40e9cf25de
prerequisite-patch-id: 0efbaf1b0e962a1c40bf5a744b5089d8be696f62
prerequisite-patch-id: afa0cff94085e6ab216ffd9b99cd3dc882a0a687
prerequisite-patch-id: 3561347f2b586392985a8e3af9ed1c5c7d3eefd5
prerequisite-patch-id: 94030044ae8d404f7cdaed9137bddd59cfb22e79
prerequisite-patch-id: a54b483797d5ffb7ce13b56a8943025181cd0d7a
prerequisite-patch-id: f148fe7f445cb42437e7e2ba8b59e7e0fd40da8b
prerequisite-patch-id: 1ef2045872843670c452816c5d6187b713c9258c
prerequisite-patch-id: 3b9963ea3ae3455ae15ee36b67042c06a2ef6006
prerequisite-patch-id: 519ee42dfabb4de734e41e59bd07d7a723d810bb
Best regards,
--
Louis Chauvet <louis.chauvet@bootlin.com>
Hey Louis, On Sat, Oct 18, 2025 at 04:01:00AM +0200, Louis Chauvet wrote: > VKMS have a wide range of options. The aim of this series is to introduce > many configfs attribute so VKMS can be used to test a wide range of > configurations. > > This series depends on [1] that should be applied soon. > > PATCH 1-13 are for configuring planes > - name > - rotation > - color encoding > - color range > - plane formats > - zpos > PATCH 14-19 are for configuring the connector > - type > - supported colorspace > - edid > PATCH 20-22 are to enable dynamic connectors > > [1]:https://lore.kernel.org/all/20251016175618.10051-1-jose.exposito89@gmail.com > > PS: Each pair of config/configfs patch are independant. I could > technically create ≈10 different series, but there will be a lot of > (trivial) conflicts between them. I will be happy to reordoer, split and > partially apply this series to help the review process. I just finished reviewing the series. Amazing work, thanks a lot for adding all of these new properties!! I'd like to see KUnit and IGT coverage to test coner cases and, since this is uAPI, to have a mechanishm to catch regressions without lots of manual testing. Let's talk so we can start working on them on v2, I'll be able to help in that front if needed. Best wishes, Jose > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> > --- > Louis Chauvet (22): > drm/vkms: Introduce config for plane name > drm/vkms: Introduce configfs for plane name > drm/vkms: Introduce config for plane rotation > drm/vkms: Introduce configfs for plane rotation > drm/vkms: Introduce config for plane color encoding > drm/vkms: Introduce configfs for plane color encoding > drm/vkms: Introduce config for plane color range > drm/vkms: Introduce configfs for plane color range > drm/vkms: Introduce config for plane format > drm/vkms: Introduce configfs for plane format > drm/vkms: Properly render plane using their zpos > drm/vkms: Introduce config for plane zpos property > drm/vkms: Introduce configfs for plane zpos property > drm/vkms: Introduce config for connector type > drm/vkms: Introduce configfs for connector type > drm/vkms: Introduce config for connector supported colorspace > drm/vkms: Introduce configfs for connector supported colorspace > drm/vkms: Introduce config for connector EDID > drm/vkms: Introduce configfs for connector EDID > drm/vkms: Store the enabled/disabled status for connector > drm/vkms: Allow to hot-add connectors > drm/vkms: Allows the creation of connector at runtime > > Documentation/gpu/vkms.rst | 42 +- > drivers/gpu/drm/vkms/tests/vkms_config_test.c | 18 + > drivers/gpu/drm/vkms/vkms_config.c | 183 ++++++ > drivers/gpu/drm/vkms/vkms_config.h | 524 +++++++++++++++ > drivers/gpu/drm/vkms/vkms_configfs.c | 893 +++++++++++++++++++++++++- > drivers/gpu/drm/vkms/vkms_connector.c | 137 +++- > drivers/gpu/drm/vkms/vkms_connector.h | 36 +- > drivers/gpu/drm/vkms/vkms_crtc.c | 11 +- > drivers/gpu/drm/vkms/vkms_drv.h | 6 +- > drivers/gpu/drm/vkms/vkms_output.c | 19 +- > drivers/gpu/drm/vkms/vkms_plane.c | 73 +-- > 11 files changed, 1865 insertions(+), 77 deletions(-) > --- > base-commit: b291e4f1a4951204ce858cd01801291d34962a33 > change-id: 20251017-vkms-all-config-bd0c2a01846f > prerequisite-message-id: 20251016175618.10051-1-jose.exposito89@gmail.com > prerequisite-patch-id: 74083a8806b1f26d9b4cd2a5107c756b971c4d11 > prerequisite-patch-id: f982390487699921b625b413e8460d67ca7a74c9 > prerequisite-patch-id: 0afca639e43c8fbfea2af1bc395e489efc8e1f10 > prerequisite-patch-id: 6285108b2fd90d30d15d4cb4fdddfef953fad51b > prerequisite-patch-id: 2eacf5ad4f25f54a60958aa7a2df633d5642ce2f > prerequisite-patch-id: 81e98ac3aeb3b6128098ab7bab56d3446a3a2705 > prerequisite-patch-id: 973f94c4edb4a5822c84a57d4479ca40e9cf25de > prerequisite-patch-id: 0efbaf1b0e962a1c40bf5a744b5089d8be696f62 > prerequisite-patch-id: afa0cff94085e6ab216ffd9b99cd3dc882a0a687 > prerequisite-patch-id: 3561347f2b586392985a8e3af9ed1c5c7d3eefd5 > prerequisite-patch-id: 94030044ae8d404f7cdaed9137bddd59cfb22e79 > prerequisite-patch-id: a54b483797d5ffb7ce13b56a8943025181cd0d7a > prerequisite-patch-id: f148fe7f445cb42437e7e2ba8b59e7e0fd40da8b > prerequisite-patch-id: 1ef2045872843670c452816c5d6187b713c9258c > prerequisite-patch-id: 3b9963ea3ae3455ae15ee36b67042c06a2ef6006 > prerequisite-patch-id: 519ee42dfabb4de734e41e59bd07d7a723d810bb > > Best regards, > -- > Louis Chauvet <louis.chauvet@bootlin.com> >
Le 27/10/2025 à 16:22, José Expósito a écrit : > Hey Louis, > > On Sat, Oct 18, 2025 at 04:01:00AM +0200, Louis Chauvet wrote: >> VKMS have a wide range of options. The aim of this series is to introduce >> many configfs attribute so VKMS can be used to test a wide range of >> configurations. >> >> This series depends on [1] that should be applied soon. >> >> PATCH 1-13 are for configuring planes >> - name >> - rotation >> - color encoding >> - color range >> - plane formats >> - zpos >> PATCH 14-19 are for configuring the connector >> - type >> - supported colorspace >> - edid >> PATCH 20-22 are to enable dynamic connectors >> >> [1]:https://lore.kernel.org/all/20251016175618.10051-1-jose.exposito89@gmail.com >> >> PS: Each pair of config/configfs patch are independant. I could >> technically create ≈10 different series, but there will be a lot of >> (trivial) conflicts between them. I will be happy to reordoer, split and >> partially apply this series to help the review process. > > I just finished reviewing the series. Thanks a lot, I started to apply your suggestions (I agree to most of them). > Amazing work, thanks a lot for adding all of these new properties!! > > I'd like to see KUnit and IGT coverage to test coner cases and, since this > is uAPI, to have a mechanishm to catch regressions without lots of manual > testing. I started to add some Kunits for vkms_config.c, for the format parsing too. > Let's talk so we can start working on them on v2, I'll be able to help in > that front if needed. I finish to apply your suggestions and I will send the v2 soon, so we can discuss on the same ground. I think we can add a little bit of vkms_config.c testing, but for vkms_configfs I need to see if we can mock configfs interations from kunit tests. Have a nice week, Louis Chauvet > Best wishes, > Jose > >> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> >> --- >> Louis Chauvet (22): >> drm/vkms: Introduce config for plane name >> drm/vkms: Introduce configfs for plane name >> drm/vkms: Introduce config for plane rotation >> drm/vkms: Introduce configfs for plane rotation >> drm/vkms: Introduce config for plane color encoding >> drm/vkms: Introduce configfs for plane color encoding >> drm/vkms: Introduce config for plane color range >> drm/vkms: Introduce configfs for plane color range >> drm/vkms: Introduce config for plane format >> drm/vkms: Introduce configfs for plane format >> drm/vkms: Properly render plane using their zpos >> drm/vkms: Introduce config for plane zpos property >> drm/vkms: Introduce configfs for plane zpos property >> drm/vkms: Introduce config for connector type >> drm/vkms: Introduce configfs for connector type >> drm/vkms: Introduce config for connector supported colorspace >> drm/vkms: Introduce configfs for connector supported colorspace >> drm/vkms: Introduce config for connector EDID >> drm/vkms: Introduce configfs for connector EDID >> drm/vkms: Store the enabled/disabled status for connector >> drm/vkms: Allow to hot-add connectors >> drm/vkms: Allows the creation of connector at runtime >> >> Documentation/gpu/vkms.rst | 42 +- >> drivers/gpu/drm/vkms/tests/vkms_config_test.c | 18 + >> drivers/gpu/drm/vkms/vkms_config.c | 183 ++++++ >> drivers/gpu/drm/vkms/vkms_config.h | 524 +++++++++++++++ >> drivers/gpu/drm/vkms/vkms_configfs.c | 893 +++++++++++++++++++++++++- >> drivers/gpu/drm/vkms/vkms_connector.c | 137 +++- >> drivers/gpu/drm/vkms/vkms_connector.h | 36 +- >> drivers/gpu/drm/vkms/vkms_crtc.c | 11 +- >> drivers/gpu/drm/vkms/vkms_drv.h | 6 +- >> drivers/gpu/drm/vkms/vkms_output.c | 19 +- >> drivers/gpu/drm/vkms/vkms_plane.c | 73 +-- >> 11 files changed, 1865 insertions(+), 77 deletions(-) >> --- >> base-commit: b291e4f1a4951204ce858cd01801291d34962a33 >> change-id: 20251017-vkms-all-config-bd0c2a01846f >> prerequisite-message-id: 20251016175618.10051-1-jose.exposito89@gmail.com >> prerequisite-patch-id: 74083a8806b1f26d9b4cd2a5107c756b971c4d11 >> prerequisite-patch-id: f982390487699921b625b413e8460d67ca7a74c9 >> prerequisite-patch-id: 0afca639e43c8fbfea2af1bc395e489efc8e1f10 >> prerequisite-patch-id: 6285108b2fd90d30d15d4cb4fdddfef953fad51b >> prerequisite-patch-id: 2eacf5ad4f25f54a60958aa7a2df633d5642ce2f >> prerequisite-patch-id: 81e98ac3aeb3b6128098ab7bab56d3446a3a2705 >> prerequisite-patch-id: 973f94c4edb4a5822c84a57d4479ca40e9cf25de >> prerequisite-patch-id: 0efbaf1b0e962a1c40bf5a744b5089d8be696f62 >> prerequisite-patch-id: afa0cff94085e6ab216ffd9b99cd3dc882a0a687 >> prerequisite-patch-id: 3561347f2b586392985a8e3af9ed1c5c7d3eefd5 >> prerequisite-patch-id: 94030044ae8d404f7cdaed9137bddd59cfb22e79 >> prerequisite-patch-id: a54b483797d5ffb7ce13b56a8943025181cd0d7a >> prerequisite-patch-id: f148fe7f445cb42437e7e2ba8b59e7e0fd40da8b >> prerequisite-patch-id: 1ef2045872843670c452816c5d6187b713c9258c >> prerequisite-patch-id: 3b9963ea3ae3455ae15ee36b67042c06a2ef6006 >> prerequisite-patch-id: 519ee42dfabb4de734e41e59bd07d7a723d810bb >> >> Best regards, >> -- >> Louis Chauvet <louis.chauvet@bootlin.com> >> -- -- Louis Chauvet, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Mon, Oct 27, 2025 at 04:53:03PM +0100, Louis Chauvet wrote: > > > Le 27/10/2025 à 16:22, José Expósito a écrit : > > Hey Louis, > > > > On Sat, Oct 18, 2025 at 04:01:00AM +0200, Louis Chauvet wrote: > > > VKMS have a wide range of options. The aim of this series is to introduce > > > many configfs attribute so VKMS can be used to test a wide range of > > > configurations. > > > > > > This series depends on [1] that should be applied soon. > > > > > > PATCH 1-13 are for configuring planes > > > - name > > > - rotation > > > - color encoding > > > - color range > > > - plane formats > > > - zpos > > > PATCH 14-19 are for configuring the connector > > > - type > > > - supported colorspace > > > - edid > > > PATCH 20-22 are to enable dynamic connectors > > > > > > [1]:https://lore.kernel.org/all/20251016175618.10051-1-jose.exposito89@gmail.com > > > > > > PS: Each pair of config/configfs patch are independant. I could > > > technically create ≈10 different series, but there will be a lot of > > > (trivial) conflicts between them. I will be happy to reordoer, split and > > > partially apply this series to help the review process. > > > > I just finished reviewing the series. > > Thanks a lot, I started to apply your suggestions (I agree to most of them). > > > Amazing work, thanks a lot for adding all of these new properties!! > > > > I'd like to see KUnit and IGT coverage to test coner cases and, since this > > is uAPI, to have a mechanishm to catch regressions without lots of manual > > testing. > > I started to add some Kunits for vkms_config.c, for the format parsing too. > > > Let's talk so we can start working on them on v2, I'll be able to help in > > that front if needed. > > I finish to apply your suggestions and I will send the v2 soon, so we can > discuss on the same ground. I think we can add a little bit of vkms_config.c > testing, but for vkms_configfs I need to see if we can mock configfs > interations from kunit tests. For vkms_configfs I find more convinient IGT than mocking in KUnit. It saves maintaining a bunch of mocking code and it is a good way to test end-to-end VKMS. Jose > Have a nice week, > Louis Chauvet > > > Best wishes, > > Jose > > > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> > > > --- > > > Louis Chauvet (22): > > > drm/vkms: Introduce config for plane name > > > drm/vkms: Introduce configfs for plane name > > > drm/vkms: Introduce config for plane rotation > > > drm/vkms: Introduce configfs for plane rotation > > > drm/vkms: Introduce config for plane color encoding > > > drm/vkms: Introduce configfs for plane color encoding > > > drm/vkms: Introduce config for plane color range > > > drm/vkms: Introduce configfs for plane color range > > > drm/vkms: Introduce config for plane format > > > drm/vkms: Introduce configfs for plane format > > > drm/vkms: Properly render plane using their zpos > > > drm/vkms: Introduce config for plane zpos property > > > drm/vkms: Introduce configfs for plane zpos property > > > drm/vkms: Introduce config for connector type > > > drm/vkms: Introduce configfs for connector type > > > drm/vkms: Introduce config for connector supported colorspace > > > drm/vkms: Introduce configfs for connector supported colorspace > > > drm/vkms: Introduce config for connector EDID > > > drm/vkms: Introduce configfs for connector EDID > > > drm/vkms: Store the enabled/disabled status for connector > > > drm/vkms: Allow to hot-add connectors > > > drm/vkms: Allows the creation of connector at runtime > > > > > > Documentation/gpu/vkms.rst | 42 +- > > > drivers/gpu/drm/vkms/tests/vkms_config_test.c | 18 + > > > drivers/gpu/drm/vkms/vkms_config.c | 183 ++++++ > > > drivers/gpu/drm/vkms/vkms_config.h | 524 +++++++++++++++ > > > drivers/gpu/drm/vkms/vkms_configfs.c | 893 +++++++++++++++++++++++++- > > > drivers/gpu/drm/vkms/vkms_connector.c | 137 +++- > > > drivers/gpu/drm/vkms/vkms_connector.h | 36 +- > > > drivers/gpu/drm/vkms/vkms_crtc.c | 11 +- > > > drivers/gpu/drm/vkms/vkms_drv.h | 6 +- > > > drivers/gpu/drm/vkms/vkms_output.c | 19 +- > > > drivers/gpu/drm/vkms/vkms_plane.c | 73 +-- > > > 11 files changed, 1865 insertions(+), 77 deletions(-) > > > --- > > > base-commit: b291e4f1a4951204ce858cd01801291d34962a33 > > > change-id: 20251017-vkms-all-config-bd0c2a01846f > > > prerequisite-message-id: 20251016175618.10051-1-jose.exposito89@gmail.com > > > prerequisite-patch-id: 74083a8806b1f26d9b4cd2a5107c756b971c4d11 > > > prerequisite-patch-id: f982390487699921b625b413e8460d67ca7a74c9 > > > prerequisite-patch-id: 0afca639e43c8fbfea2af1bc395e489efc8e1f10 > > > prerequisite-patch-id: 6285108b2fd90d30d15d4cb4fdddfef953fad51b > > > prerequisite-patch-id: 2eacf5ad4f25f54a60958aa7a2df633d5642ce2f > > > prerequisite-patch-id: 81e98ac3aeb3b6128098ab7bab56d3446a3a2705 > > > prerequisite-patch-id: 973f94c4edb4a5822c84a57d4479ca40e9cf25de > > > prerequisite-patch-id: 0efbaf1b0e962a1c40bf5a744b5089d8be696f62 > > > prerequisite-patch-id: afa0cff94085e6ab216ffd9b99cd3dc882a0a687 > > > prerequisite-patch-id: 3561347f2b586392985a8e3af9ed1c5c7d3eefd5 > > > prerequisite-patch-id: 94030044ae8d404f7cdaed9137bddd59cfb22e79 > > > prerequisite-patch-id: a54b483797d5ffb7ce13b56a8943025181cd0d7a > > > prerequisite-patch-id: f148fe7f445cb42437e7e2ba8b59e7e0fd40da8b > > > prerequisite-patch-id: 1ef2045872843670c452816c5d6187b713c9258c > > > prerequisite-patch-id: 3b9963ea3ae3455ae15ee36b67042c06a2ef6006 > > > prerequisite-patch-id: 519ee42dfabb4de734e41e59bd07d7a723d810bb > > > > > > Best regards, > > > -- > > > Louis Chauvet <louis.chauvet@bootlin.com> > > > > > -- > -- > Louis Chauvet, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com >
© 2016 - 2026 Red Hat, Inc.