This series contains the remaining (device tree) patches for the
Kontron SMARC-sAM67 module.

v3:
 - dropped all patches which were already applied
 - add 'bootph-all' to the usb ctrl node to support DFU boot
 - as all MFD bits are now merged, combine the patch which added the
   system controller node into the main one again
 - drop duplicate RTC node. This one was a left over before the rtc
   node moved into it's own overlay
 - add a new overlay for the Kontron SMARC 2.2 evaluation carrier
 - add a new SMARC gpio overlay to configure the pinmux correct.
   This is not integrated into the default device tree because it
   will conflict with any device tree which will use the pins for
   different purposes (they are multi function pins)

v2:
 - dropped patches which were already picked up
 - new patch "dt-bindings: mfd: tps6594: allow gpio-line-names"
 - separate driver for the hwmon, add missing hwmon documentation,
   thanks Guenter
 - split the DT as suggested by the SoC maintainers
 - add missing copyright and license to the overlays, thanks Andrew

Michael Walle (3):
  dt-bindings: arm: ti: Add Kontron SMARC-sAM67 module
  arm64: dts: ti: Add support for Kontron SMARC-sAM67
  arm64: dts: ti: sa67: add overlay for the ADS2 carrier

 .../devicetree/bindings/arm/ti/k3.yaml        |    1 +
 arch/arm64/boot/dts/ti/Makefile               |   10 +
 .../dts/ti/k3-am67a-kontron-sa67-ads2.dtso    |  146 +++
 .../dts/ti/k3-am67a-kontron-sa67-base.dts     | 1091 +++++++++++++++++
 .../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso    |   26 +
 .../dts/ti/k3-am67a-kontron-sa67-gpios.dtso   |   61 +
 .../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso  |   31 +
 7 files changed, 1366 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso

-- 
2.47.3

Hi Michael Walle,

On Fri, 17 Oct 2025 15:50:43 +0200, Michael Walle wrote:
> This series contains the remaining (device tree) patches for the
> Kontron SMARC-sAM67 module.
> 
> v3:
>  - dropped all patches which were already applied
>  - add 'bootph-all' to the usb ctrl node to support DFU boot
>  - as all MFD bits are now merged, combine the patch which added the
>    system controller node into the main one again
>  - drop duplicate RTC node. This one was a left over before the rtc
>    node moved into it's own overlay
>  - add a new overlay for the Kontron SMARC 2.2 evaluation carrier
>  - add a new SMARC gpio overlay to configure the pinmux correct.
>    This is not integrated into the default device tree because it
>    will conflict with any device tree which will use the pins for
>    different purposes (they are multi function pins)
> 
> [...]

I have applied the following to branch ti-next on [1].
Thank you!

[1/3] dt-bindings: arm: ti: Add Kontron SMARC-sAM67 module
      commit: 22e1d0d8cda783bee95de578cbda3ad0da8a3eb4
[2/3] arm64: dts: ti: Add support for Kontron SMARC-sAM67
      commit: 1c3c4df06f9dee41bff60b93d9f0e67500f798f7
[3/3] arm64: dts: ti: sa67: add overlay for the ADS2 carrier
      commit: 0114330e7f92ae4f643fca62e6004631018f48d0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh