Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa8b ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
sound/soc/qcom/qdsp6/q6apm-dai.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
index 4ecaff45c518..786ab3222515 100644
--- a/sound/soc/qcom/qdsp6/q6apm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
@@ -86,6 +86,7 @@ static const struct snd_pcm_hardware q6apm_dai_hardware_capture = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_NO_REWINDS | SNDRV_PCM_INFO_SYNC_APPLPTR |
SNDRV_PCM_INFO_BATCH),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE),
.rates = SNDRV_PCM_RATE_8000_48000,
@@ -105,6 +106,7 @@ static const struct snd_pcm_hardware q6apm_dai_hardware_playback = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_NO_REWINDS | SNDRV_PCM_INFO_SYNC_APPLPTR |
SNDRV_PCM_INFO_BATCH),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE),
.rates = SNDRV_PCM_RATE_8000_192000,
--
2.51.0