[v3] iio: humditiy: hdc3020: fix units

[PATCH v3 0/2] iio: humditiy: hdc3020: fix units

Dimitri Fedrau via B4 Relay posted 2 patches 2 months, 1 week ago

Diff against v1 v2 v4
Download series mbox

There is a newer version of this series

drivers/iio/humidity/hdc3020.c | 71 ++++++++++++++++++++++++------------------
1 file changed, 41 insertions(+), 30 deletions(-)

Expand all Fold all

[PATCH v3 0/2] iio: humditiy: hdc3020: fix units

Posted by Dimitri Fedrau via B4 Relay 2 months, 1 week ago

Fix units to milli degree celsius and milli percent for temperature
respectively relative humidity measurements and thresholds.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
---
Changes in v3:
- Fix verbose comment for define HDC3020_THRESH_FRACTION (Javier)
- Embed prescale into define HDC3020_THRESH_FRACTION to make the division
  by 5 calculation in threshold calculations explicit. (Andy)
- Add resulting units into comments again in hdc3020_thresh_get_temp and
  hdc3020_thresh_get_hum (Andy)
- Link to v2: https://lore.kernel.org/r/20250901-hdc3020-units-fix-v2-0-082038a15917@liebherr.com

Changes in v2:
- Added explanation what is wrong at the moment into commit msg
- Added define HDC3020_THRESH_FRACTION and comment at the beginning of the
  code.
- Use MILLI for instead of hardcoded 1000.
- Link to v1: https://lore.kernel.org/r/20250821-hdc3020-units-fix-v1-0-6ab0bc353c5e@liebherr.com

---
Dimitri Fedrau (2):
      iio: humditiy: hdc3020: fix units for temperature and humidity measurement
      iio: humditiy: hdc3020: fix units for thresholds and hysteresis

 drivers/iio/humidity/hdc3020.c | 71 ++++++++++++++++++++++++------------------
 1 file changed, 41 insertions(+), 30 deletions(-)
---
base-commit: 875e7d357a7f2e77a7f3fc4759d0aa0872c33027
change-id: 20250820-hdc3020-units-fix-91edbb8ccd07

Best regards,
-- 
Dimitri Fedrau <dimitri.fedrau@liebherr.com>