From: Alexander Martinz <amartinz@shiftphones.com>
As with all other devices in commit 7747a49db7e5 ("arm64: dts: qcom:
sc7280-*: Remove thermal zone polling delays"), apply the same change to
this device as the delays are assumed to be equal to "0" if not set.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index 8d45e6ac0e44..0d331bda4a82 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -130,8 +130,6 @@ rmtfs_mem: rmtfs@f8500000 {
thermal-zones {
camera-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 2>;
trips {
@@ -144,8 +142,6 @@ active-config0 {
};
chg-skin-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm7250b_adc_tm 0>;
trips {
@@ -158,8 +154,6 @@ active-config0 {
};
conn-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm7250b_adc_tm 1>;
trips {
@@ -172,8 +166,6 @@ active-config0 {
};
quiet-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 1>;
trips {
@@ -186,8 +178,6 @@ active-config0 {
};
rear-cam-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 4>;
trips {
@@ -200,8 +190,6 @@ active-config0 {
};
sdm-skin-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 3>;
trips {
@@ -214,8 +202,6 @@ active-config0 {
};
xo-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 0>;
trips {
--
2.51.0