Add driver support for DesignWare based PCIe controller in Andes
QiLai SoC. The driver only supports the Root Complex mode.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 drivers/pci/controller/dwc/Kconfig            |  13 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 drivers/pci/controller/dwc/pcie-andes-qilai.c | 240 ++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-andes-qilai.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index ff6b6d9e18ec..15cf19c9449f 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -60,6 +60,19 @@ config PCI_MESON
 	  and therefore the driver re-uses the DesignWare core functions to
 	  implement the driver.
 
+config PCIE_ANDES_QILAI
+	tristate "Andes QiLai PCIe controller"
+	depends on ARCH_ANDES || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	help
+	  Say Y here to enable PCIe controller support on Andes QiLai SoCs,
+	  which operate in Root Complex mode. The Andes QiLai SoC PCIe
+	  controller is based on DesignWare IP (5.97a version) and therefore
+	  the driver re-uses the DesignWare core functions to implement the
+	  driver. The Andes QiLai SoC features three Root Complexes, each
+	  operating on PCIe 4.0.
+
 config PCIE_ARTPEC6
 	bool
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 6919d27798d1..de9583cbd675 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
 obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
 obj-$(CONFIG_PCIE_AMD_MDB) += pcie-amd-mdb.o
+obj-$(CONFIG_PCIE_ANDES_QILAI) += pcie-andes-qilai.o
 obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o
 obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
diff --git a/drivers/pci/controller/dwc/pcie-andes-qilai.c b/drivers/pci/controller/dwc/pcie-andes-qilai.c
new file mode 100644
index 000000000000..fd1521a5e89c
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-andes-qilai.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the PCIe Controller in QiLai from Andes
+ *
+ * Copyright (C) 2025 Andes Technology Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define PCIE_INTR_CONTROL1			0x15c
+#define PCIE_MSI_CTRL_INT_EN			BIT(28)
+
+#define PCIE_LOGIC_COHERENCY_CONTROL3		0x8e8
+
+/*
+ * Refer to Table A4-5 (Memory type encoding) in the
+ * AMBA AXI and ACE Protocol Specification.
+ *
+ * The selected value corresponds to the Memory type field:
+ * "Write-back, Read and Write-allocate".
+ *
+ * The last three rows in the table A4-5 in
+ * AMBA AXI and ACE Protocol Specification:
+ * ARCACHE        AWCACHE        Memory type
+ * ------------------------------------------------------------------
+ * 1111 (0111)    0111           Write-back Read-allocate
+ * 1011           1111 (1011)    Write-back Write-allocate
+ * 1111           1111           Write-back Read and Write-allocate (selected)
+ */
+#define IOCP_ARCACHE				0b1111
+#define IOCP_AWCACHE				0b1111
+
+#define PCIE_CFG_MSTR_ARCACHE_MODE		GENMASK(6, 3)
+#define PCIE_CFG_MSTR_AWCACHE_MODE		GENMASK(14, 11)
+#define PCIE_CFG_MSTR_ARCACHE_VALUE		GENMASK(22, 19)
+#define PCIE_CFG_MSTR_AWCACHE_VALUE		GENMASK(30, 27)
+
+#define PCIE_GEN_CONTROL2			0x54
+#define PCIE_CFG_LTSSM_EN			BIT(0)
+
+#define PCIE_REGS_PCIE_SII_PM_STATE		0xc0
+#define SMLH_LINK_UP				BIT(6)
+#define RDLH_LINK_UP				BIT(7)
+#define PCIE_REGS_PCIE_SII_LINK_UP		(SMLH_LINK_UP | RDLH_LINK_UP)
+
+struct qilai_pcie {
+	struct dw_pcie pci;
+	void __iomem *apb_base;
+};
+
+#define to_qilai_pcie(_pci) container_of(_pci, struct qilai_pcie, pci)
+
+static bool qilai_pcie_link_up(struct dw_pcie *pci)
+{
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+	u32 val;
+
+	/* Read smlh & rdlh link up by checking debug port */
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_SII_PM_STATE);
+
+	return (val & PCIE_REGS_PCIE_SII_LINK_UP) == PCIE_REGS_PCIE_SII_LINK_UP;
+}
+
+static int qilai_pcie_start_link(struct dw_pcie *pci)
+{
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_GEN_CONTROL2);
+	val |= PCIE_CFG_LTSSM_EN;
+	writel(val, pcie->apb_base + PCIE_GEN_CONTROL2);
+
+	return 0;
+}
+
+static const struct dw_pcie_ops qilai_pcie_ops = {
+	.link_up = qilai_pcie_link_up,
+	.start_link = qilai_pcie_start_link,
+};
+
+/*
+ * Setup the Qilai PCIe IOCP (IO Coherence Port) Read/Write Behaviors to the
+ * Write-Back, Read and Write Allocate mode.
+ *
+ * The IOCP HW target is SoC last-level cache (L2 Cache), which serves as the
+ * system cache. The IOCP HW helps maintain cache monitoring, ensuring that
+ * the device can snoop data from/to the cache.
+ */
+static void qilai_pcie_iocp_cache_setup(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u32 val;
+
+	dw_pcie_dbi_ro_wr_en(pci);
+
+	dw_pcie_read(pci->dbi_base + PCIE_LOGIC_COHERENCY_CONTROL3,
+		     sizeof(val), &val);
+	FIELD_MODIFY(PCIE_CFG_MSTR_ARCACHE_MODE, &val, IOCP_ARCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_AWCACHE_MODE, &val, IOCP_AWCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_ARCACHE_VALUE, &val, IOCP_ARCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_AWCACHE_VALUE, &val, IOCP_AWCACHE);
+	dw_pcie_write(pci->dbi_base + PCIE_LOGIC_COHERENCY_CONTROL3,
+		      sizeof(val), val);
+
+	dw_pcie_dbi_ro_wr_dis(pci);
+}
+
+static void qilai_pcie_enable_msi(struct qilai_pcie *pcie)
+{
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_INTR_CONTROL1);
+	val |= PCIE_MSI_CTRL_INT_EN;
+	writel(val, pcie->apb_base + PCIE_INTR_CONTROL1);
+}
+
+/*
+ * The QiLai SoC PCIe controller's outbound iATU region supports
+ * a maximum size of SZ_4G - 1. To prevent programming failures,
+ * only consider bridge->windows with sizes within this limit.
+ *
+ * To ensure compatibility with most endpoint devices, at least
+ * one memory region must be mapped within the 32-bits address space.
+ */
+static int qilai_pcie_host_fix_ob_iatu_count(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct device *dev = pci->dev;
+	struct resource_entry *entry;
+	/* Reserved 1 ob iATU for config space */
+	int count = 1;
+	int ranges_32bits;
+	u64 pci_addr;
+	u64 size;
+
+	resource_list_for_each_entry(entry, &pp->bridge->windows) {
+		if (resource_type(entry->res) != IORESOURCE_MEM)
+			continue;
+
+		size = resource_size(entry->res);
+		if (size < SZ_4G)
+			count++;
+
+		pci_addr = entry->res->start - entry->offset;
+		if (pci_addr < SZ_4G)
+			ranges_32bits = true;
+	}
+
+	if (!ranges_32bits) {
+		dev_err(dev, "Bridge window must contain 32-bits address\n");
+		return -EINVAL;
+	}
+
+	pci->num_ob_windows = count;
+
+	return 0;
+}
+
+static int qilai_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+
+	qilai_pcie_enable_msi(pcie);
+
+	return qilai_pcie_host_fix_ob_iatu_count(pp);
+}
+
+static void qilai_pcie_host_post_init(struct dw_pcie_rp *pp)
+{
+	qilai_pcie_iocp_cache_setup(pp);
+}
+
+static const struct dw_pcie_host_ops qilai_pcie_host_ops = {
+	.init = qilai_pcie_host_init,
+	.post_init = qilai_pcie_host_post_init,
+};
+
+static int qilai_pcie_probe(struct platform_device *pdev)
+{
+	struct qilai_pcie *pcie;
+	struct dw_pcie *pci;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pcie);
+
+	pci = &pcie->pci;
+	pcie->pci.dev = dev;
+	pcie->pci.ops = &qilai_pcie_ops;
+	pcie->pci.pp.ops = &qilai_pcie_host_ops;
+	pci->use_parent_dt_ranges = true;
+
+	dw_pcie_cap_set(&pcie->pci, REQ_RES);
+
+	pcie->apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+	if (IS_ERR(pcie->apb_base))
+		return PTR_ERR(pcie->apb_base);
+
+	ret = dw_pcie_host_init(&pcie->pci.pp);
+	if (ret) {
+		dev_err_probe(dev, ret, "Failed to initialize PCIe host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id qilai_pcie_of_match[] = {
+	{ .compatible = "andestech,qilai-pcie" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, qilai_pcie_of_match);
+
+static struct platform_driver qilai_pcie_driver = {
+	.probe = qilai_pcie_probe,
+	.driver = {
+		.name	= "qilai-pcie",
+		.of_match_table = qilai_pcie_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+builtin_platform_driver(qilai_pcie_driver);
+
+MODULE_AUTHOR("Randolph Lin <randolph@andestech.com>");
+MODULE_DESCRIPTION("Andes Qilai PCIe driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1