Hi Conor,
Thanks for your review.
On Thu, Oct 02, 2025 at 07:48:57PM +0100, Conor Dooley wrote:
> On Wed, Oct 01, 2025 at 11:26:44PM +0200, Tommaso Merciai wrote:
> > Dear All,
> >
> > This patch series adds USB2.0 support for the Renesas R9A09G047 (RZ/G3E)
> > SoC and enables it on the RZ/G3E SMARC II board.
> > The RZ/G3E USB2.0 IP is identical to that used in the RZ/V2H (R9A09G057),
> > so the existing support has been extended accordingly.
> >
> > The series applies on top of [1] and [2] and includes driver cleanups,
> > VBUS/OTG handling fixes, regulator improvements, clock/reset additions,
> > and device tree updates for RZ/G3E, RZ/V2H, and RZ/V2N SoCs and boards.
> >
> > Thanks & Regards,
> > Tommaso
>
> If you're not gonna CC me on all the patches in the series, please at
> least CC me on the cover so I have an idea about what is going on in the
> rest of the set.
Sorry, I made a mistake when I sent the series.
I only ran ./scripts/get_maintainer.pl on some patches, not all.
My fault.
> All the bindings are
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
Thanks for your tag!
Regards,
Tommaso
>
> Cheers,
> Conor.
>
> >
> > [1] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=1001788
> > [2] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=1006104
> >
> > Tommaso Merciai (18):
> > phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
> > phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
> > reset: rzv2h-usb2phy: Simplify pm_runtime driver handling
> > reset: rzv2h-usb2phy: Set VBENCTL register for OTG mode
> > dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
> > phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
> > regulator: devres: Disable exclusive regulator before releasing
> > dt-bindings: clock: renesas,r9a09g047-cpg: Add USB2 PHY core clocks
> > clk: renesas: r9a09g047: Add clock and reset entries for USB2
> > dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
> > dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
> > dt-bindings: reset: Document RZ/G3E USB2PHY reset
> > arm64: dts: renesas: r9a09g056: Add USB2.0 PHY VBUS internal regulator
> > node
> > arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2 PHY0 VBUS
> > support
> > arm64: dts: renesas: r9a09g057: Add USB2.0 PHY VBUS internal regulator
> > node
> > arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2 PHY0 VBUS
> > support
> > arm64: dts: renesas: r9a09g047: Add USB2.0 support
> > arm64: dts: renesas: r9a09g047e57-smarc: Enable USB2.0 support
> >
> > .../bindings/phy/renesas,usb2-phy.yaml | 10 +-
> > .../reset/renesas,rzv2h-usb2phy-reset.yaml | 4 +-
> > .../bindings/usb/renesas,usbhs.yaml | 1 +
> > arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 122 +++++++++++
> > .../boot/dts/renesas/r9a09g047e57-smarc.dts | 49 +++++
> > arch/arm64/boot/dts/renesas/r9a09g056.dtsi | 6 +
> > .../dts/renesas/r9a09g056n48-rzv2n-evk.dts | 5 +
> > arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 6 +
> > .../dts/renesas/r9a09g057h44-rzv2h-evk.dts | 5 +
> > .../boot/dts/renesas/renesas-smarc2.dtsi | 23 ++
> > drivers/clk/renesas/r9a09g047-cpg.c | 18 +-
> > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 199 +++++++++++++-----
> > drivers/regulator/devres.c | 8 +-
> > drivers/reset/reset-rzv2h-usb2phy.c | 105 ++++++---
> > .../dt-bindings/clock/renesas,r9a09g047-cpg.h | 2 +
> > 15 files changed, 478 insertions(+), 85 deletions(-)
> >
> > --
> > 2.43.0
> >