Add bindings for the regulators found in the MediaTek MT6363 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks, along with the MT6316 and
MT6363 PMICs.
Link: https://lore.kernel.org/r/20250715140224.206329-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../regulator/mediatek,mt6373-regulator.yaml | 137 ++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml
new file mode 100644
index 000000000000..cb721d81b77c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6373-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6373 PMIC Regulators
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+ The MT6373 SPMI PMIC provides 10 BUCK and 23 LDO (Low DropOut) regulators
+ and can optionally provide overcurrent warnings with one ocp interrupt
+ for each voltage regulator.
+
+properties:
+ compatible:
+ const: mediatek,mt6373-regulator
+
+ reg:
+ maxItems: 1
+
+ vsys-vbuck0-supply:
+ description: Input supply for vbuck0
+
+ vsys-vbuck1-supply:
+ description: Input supply for vbuck1
+
+ vsys-vbuck2-supply:
+ description: Input supply for vbuck2
+
+ vsys-vbuck3-supply:
+ description: Input supply for vbuck3
+
+ vsys-vbuck4-supply:
+ description: Input supply for vbuck4
+
+ vsys-vbuck5-supply:
+ description: Input supply for vbuck5
+
+ vsys-vbuck6-supply:
+ description: Input supply for vbuck6
+
+ vsys-vbuck7-supply:
+ description: Input supply for vbuck7
+
+ vsys-vbuck8-supply:
+ description: Input supply for vbuck8
+
+ vsys-vbuck9-supply:
+ description: Input supply for vbuck9
+
+ vs1-ldo1-supply:
+ description: Input supply for vant18, vaud18, vcn18io
+
+ vs2-ldo1-supply:
+ description: Input supply for vrf12-aif, vrf13-aif
+
+ vs3-ldo1-supply:
+ description: Input supply for vrf09-aif, vsram-digrf-aif
+
+ vsys-ldo1-supply:
+ description: Input supply for vcn33-1, vcn33-2, vmc
+
+ vsys-ldo2-supply:
+ description:
+ Input supply for vaux18, vcn33-3, vefuse, vfp, vibr, vio28, vtp, vusb
+
+ vsys-ldo3-supply:
+ description: Input supply for vmch, vmch-eint-high/low
+
+patternProperties:
+ "^v(ant|aud|aux)18$":
+ $ref: "#/$defs/mediatek-mt6373-ldo-common"
+
+ "^vbuck([0-9])$":
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ Allowed Buck regulator operating modes allowed. Valid values below.
+ 0 - Normal mode with automatic power saving, reducing the switching
+ frequency when light load conditions are detected
+ 1 - Forced Continuous Conduction mode (FCCM) for improved voltage
+ regulation accuracy with constant switching frequency but lower
+ regulator efficiency
+ 2 - Forced Low Power mode for improved regulator efficiency, used
+ when no heavy load is expected, does not limit the maximum out
+ current but unless only a light load is applied, there will be
+ regulation accuracy and efficiency losses.
+ 3 - Forced Ultra Low Power mode for ultra low load, this greatly
+ reduces the maximum output power, makes the regulator to be
+ efficient only for ultra light load, and greatly reduces the
+ quiescent current (Iq) of the buck.
+ maxItems: 3
+ items:
+ enum: [ 0, 1, 2, 3 ]
+ unevaluatedProperties: false
+
+ "^v(cn18io|cn33-[123]|efuse|fp|tp|ibr|io28|sram-digrf-aif|usb)":
+ $ref: "#/$defs/mediatek-mt6373-ldo-common"
+
+ "^vmc(h)?$":
+ $ref: "#/$defs/mediatek-mt6373-ldo-common"
+
+ "^vmch-eint-(low|high)?$":
+ $ref: "#/$defs/mediatek-mt6373-ldo-common"
+
+ "^vrf(09|12|13|18|io18)-aif$":
+ $ref: "#/$defs/mediatek-mt6373-ldo-common"
+
+$defs:
+ mediatek-mt6373-ldo-common:
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ properties:
+ regulator-allowed-modes:
+ description: |
+ Allowed LDO regulator operating modes allowed. Valid values below.
+ 0 - Normal mode with automatic power saving, reducing the switching
+ frequency when light load conditions are detected
+ 2 - Forced Low Power mode for improved regulator efficiency, used
+ when no heavy load is expected, does not limit the maximum out
+ current but unless only a light load is applied, there will be
+ regulation accuracy and efficiency losses.
+ maxItems: 2
+ items:
+ enum: [ 0, 2 ]
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
--
2.51.0On Wed, Oct 01, 2025 at 01:13:12PM +0200, AngeloGioacchino Del Regno wrote: > Add bindings for the regulators found in the MediaTek MT6363 PMIC, > usually found in board designs using the MT6991 Dimensity 9400 and > on MT8196 Kompanio SoC for Chromebooks, along with the MT6316 and > MT6363 PMICs. > > Link: https://lore.kernel.org/r/20250715140224.206329-6-angelogioacchino.delregno@collabora.com > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > .../regulator/mediatek,mt6373-regulator.yaml | 137 ++++++++++++++++++ > 1 file changed, 137 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml > new file mode 100644 > index 000000000000..cb721d81b77c > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6373-regulator.yaml > @@ -0,0 +1,137 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/mediatek,mt6373-regulator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek MT6373 PMIC Regulators > + > +maintainers: > + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > + > +description: > + The MT6373 SPMI PMIC provides 10 BUCK and 23 LDO (Low DropOut) regulators > + and can optionally provide overcurrent warnings with one ocp interrupt > + for each voltage regulator. > + > +properties: > + compatible: > + const: mediatek,mt6373-regulator > + > + reg: > + maxItems: 1 > + > + vsys-vbuck0-supply: > + description: Input supply for vbuck0 > + > + vsys-vbuck1-supply: > + description: Input supply for vbuck1 > + > + vsys-vbuck2-supply: > + description: Input supply for vbuck2 > + > + vsys-vbuck3-supply: > + description: Input supply for vbuck3 > + > + vsys-vbuck4-supply: > + description: Input supply for vbuck4 > + > + vsys-vbuck5-supply: > + description: Input supply for vbuck5 > + > + vsys-vbuck6-supply: > + description: Input supply for vbuck6 > + > + vsys-vbuck7-supply: > + description: Input supply for vbuck7 > + > + vsys-vbuck8-supply: > + description: Input supply for vbuck8 > + > + vsys-vbuck9-supply: > + description: Input supply for vbuck9 > + > + vs1-ldo1-supply: > + description: Input supply for vant18, vaud18, vcn18io > + > + vs2-ldo1-supply: > + description: Input supply for vrf12-aif, vrf13-aif > + > + vs3-ldo1-supply: > + description: Input supply for vrf09-aif, vsram-digrf-aif > + > + vsys-ldo1-supply: > + description: Input supply for vcn33-1, vcn33-2, vmc > + > + vsys-ldo2-supply: > + description: > + Input supply for vaux18, vcn33-3, vefuse, vfp, vibr, vio28, vtp, vusb > + > + vsys-ldo3-supply: > + description: Input supply for vmch, vmch-eint-high/low > + > +patternProperties: > + "^v(ant|aud|aux)18$": > + $ref: "#/$defs/mediatek-mt6373-ldo-common" > + > + "^vbuck([0-9])$": Don't need (). > + type: object > + $ref: regulator.yaml# > + properties: > + regulator-allowed-modes: > + description: | > + Allowed Buck regulator operating modes allowed. Valid values below. > + 0 - Normal mode with automatic power saving, reducing the switching > + frequency when light load conditions are detected > + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage > + regulation accuracy with constant switching frequency but lower > + regulator efficiency > + 2 - Forced Low Power mode for improved regulator efficiency, used > + when no heavy load is expected, does not limit the maximum out > + current but unless only a light load is applied, there will be > + regulation accuracy and efficiency losses. > + 3 - Forced Ultra Low Power mode for ultra low load, this greatly > + reduces the maximum output power, makes the regulator to be > + efficient only for ultra light load, and greatly reduces the > + quiescent current (Iq) of the buck. > + maxItems: 3 > + items: > + enum: [ 0, 1, 2, 3 ] > + unevaluatedProperties: false > + > + "^v(cn18io|cn33-[123]|efuse|fp|tp|ibr|io28|sram-digrf-aif|usb)": Missing '$' anchor. > + $ref: "#/$defs/mediatek-mt6373-ldo-common" > + > + "^vmc(h)?$": Don't need (). > + $ref: "#/$defs/mediatek-mt6373-ldo-common" > + > + "^vmch-eint-(low|high)?$": vmch-eint- is a valid name? > + $ref: "#/$defs/mediatek-mt6373-ldo-common" > + > + "^vrf(09|12|13|18|io18)-aif$": > + $ref: "#/$defs/mediatek-mt6373-ldo-common" > + > +$defs: > + mediatek-mt6373-ldo-common: The name is local to the schema, so 'ldo-common' would be sufficient. > + type: object > + $ref: regulator.yaml# > + unevaluatedProperties: false > + properties: > + regulator-allowed-modes: > + description: | > + Allowed LDO regulator operating modes allowed. Valid values below. > + 0 - Normal mode with automatic power saving, reducing the switching > + frequency when light load conditions are detected > + 2 - Forced Low Power mode for improved regulator efficiency, used > + when no heavy load is expected, does not limit the maximum out > + current but unless only a light load is applied, there will be > + regulation accuracy and efficiency losses. > + maxItems: 2 > + items: > + enum: [ 0, 2 ] > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > -- > 2.51.0 >
© 2016 - 2025 Red Hat, Inc.