From: Gregor Herburger <gregor.herburger@ew.tq-group.com>

When rx_int is used th mcp251xfd_chip_rx_int_enable and
mcp251xfd_chip_rx_int_disable function configure both PIN0 and PIN1. To
prepare the support of the GPIOS only configure PIN1 with
regmap_update_bits.

This way PIN0 can be used as GPIO while PIN1 is used as rx_int
interrupt.

Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
---
 .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 22 +++++++------------
 drivers/net/can/spi/mcp251xfd/mcp251xfd.h     |  6 +++++
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index f9eabb1810cf..ea41f04ae1a6 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -608,23 +608,21 @@ static int mcp251xfd_set_bittiming(const struct mcp251xfd_priv *priv)
 
 static int mcp251xfd_chip_rx_int_enable(const struct mcp251xfd_priv *priv)
 {
-	u32 val;
+	u32 val, mask;
 
 	if (!priv->rx_int)
 		return 0;
 
-	/* Configure GPIOs:
-	 * - PIN0: GPIO Input
-	 * - PIN1: GPIO Input/RX Interrupt
+	/* Configure PIN1 as RX Interrupt:
 	 *
 	 * PIN1 must be Input, otherwise there is a glitch on the
 	 * rx-INT line. It happens between setting the PIN as output
 	 * (in the first byte of the SPI transfer) and configuring the
 	 * PIN as interrupt (in the last byte of the SPI transfer).
 	 */
-	val = MCP251XFD_REG_IOCON_PM0 | MCP251XFD_REG_IOCON_TRIS1 |
-		MCP251XFD_REG_IOCON_TRIS0;
-	return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
+	val = MCP251XFD_REG_IOCON_TRIS(1);
+	mask = MCP251XFD_REG_IOCON_TRIS(1) | MCP251XFD_REG_IOCON_PM(1);
+	return regmap_update_bits(priv->map_reg, MCP251XFD_REG_IOCON, mask, val);
 }
 
 static int mcp251xfd_chip_rx_int_disable(const struct mcp251xfd_priv *priv)
@@ -634,13 +632,9 @@ static int mcp251xfd_chip_rx_int_disable(const struct mcp251xfd_priv *priv)
 	if (!priv->rx_int)
 		return 0;
 
-	/* Configure GPIOs:
-	 * - PIN0: GPIO Input
-	 * - PIN1: GPIO Input
-	 */
-	val = MCP251XFD_REG_IOCON_PM1 | MCP251XFD_REG_IOCON_PM0 |
-		MCP251XFD_REG_IOCON_TRIS1 | MCP251XFD_REG_IOCON_TRIS0;
-	return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
+	/* Configure PIN1 as GPIO Input */
+	val = MCP251XFD_REG_IOCON_PM(1) | MCP251XFD_REG_IOCON_TRIS(1);
+	return regmap_update_bits(priv->map_reg, MCP251XFD_REG_IOCON, val, val);
 }
 
 static int mcp251xfd_chip_ecc_init(struct mcp251xfd_priv *priv)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index dcbbd2b2fae8..bd28510a6583 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -335,13 +335,19 @@
 #define MCP251XFD_REG_IOCON_TXCANOD BIT(28)
 #define MCP251XFD_REG_IOCON_PM1 BIT(25)
 #define MCP251XFD_REG_IOCON_PM0 BIT(24)
+#define MCP251XFD_REG_IOCON_PM(n) (MCP251XFD_REG_IOCON_PM0 << (n))
 #define MCP251XFD_REG_IOCON_GPIO1 BIT(17)
 #define MCP251XFD_REG_IOCON_GPIO0 BIT(16)
+#define MCP251XFD_REG_IOCON_GPIO(n) (MCP251XFD_REG_IOCON_GPIO0 << (n))
+#define MCP251XFD_REG_IOCON_GPIO_MASK GENMASK(17, 16)
 #define MCP251XFD_REG_IOCON_LAT1 BIT(9)
 #define MCP251XFD_REG_IOCON_LAT0 BIT(8)
+#define MCP251XFD_REG_IOCON_LAT(n) (MCP251XFD_REG_IOCON_LAT0 << (n))
+#define MCP251XFD_REG_IOCON_LAT_MASK GENMASK(9, 8)
 #define MCP251XFD_REG_IOCON_XSTBYEN BIT(6)
 #define MCP251XFD_REG_IOCON_TRIS1 BIT(1)
 #define MCP251XFD_REG_IOCON_TRIS0 BIT(0)
+#define MCP251XFD_REG_IOCON_TRIS(n) (MCP251XFD_REG_IOCON_TRIS0 << (n))
 
 #define MCP251XFD_REG_CRC 0xe08
 #define MCP251XFD_REG_CRC_FERRIE BIT(25)
-- 
2.34.1