From: Akhil R <akhilrajeev@nvidia.com>

Add support for Tegra264 SoC which supports 17 generic I2C controllers,
two of which are in the AON (always-on) partition of the SoC. In
addition to the features supported by Tegra194 it also supports a
SW mutex register to allow sharing the same I2C instance across
multiple firmware.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
v1 -> v4:
        * Update commit message to mention the SW mutex feature
          available on Tegra264.
---
 drivers/i2c/busses/i2c-tegra.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 1c8c24ae54ed..f324cf3b1f28 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1814,7 +1814,36 @@ static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
 	.has_interface_timing_reg = true,
 };
 
+static const struct tegra_i2c_hw_feature tegra264_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x1d,
+	.clk_divisor_fast_mode = 0x15,
+	.clk_divisor_fast_plus_mode = 0x8,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = true,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = true,
+	.quirks = &tegra194_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = false,
+	.tlow_std_mode = 0x8,
+	.thigh_std_mode = 0x7,
+	.tlow_fast_fastplus_mode = 0x2,
+	.thigh_fast_fastplus_mode = 0x2,
+	.tlow_hs_mode = 0x4,
+	.thigh_hs_mode = 0x2,
+	.setup_hold_time_std_mode = 0x08080808,
+	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
+	.setup_hold_time_hs_mode = 0x090909,
+	.has_interface_timing_reg = true,
+	.has_hs_mode_support = true,
+	.has_mutex = true,
+};
+
 static const struct of_device_id tegra_i2c_of_match[] = {
+	{ .compatible = "nvidia,tegra264-i2c", .data = &tegra264_i2c_hw, },
 	{ .compatible = "nvidia,tegra256-i2c", .data = &tegra256_i2c_hw, },
 	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
 	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
-- 
2.50.1

On 01/10/2025 07:47, Kartik Rajput wrote:
> From: Akhil R <akhilrajeev@nvidia.com>
> 
> Add support for Tegra264 SoC which supports 17 generic I2C controllers,
> two of which are in the AON (always-on) partition of the SoC. In
> addition to the features supported by Tegra194 it also supports a
> SW mutex register to allow sharing the same I2C instance across
> multiple firmware.
> 
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
> ---
> v1 -> v4:
>          * Update commit message to mention the SW mutex feature
>            available on Tegra264.
> ---
>   drivers/i2c/busses/i2c-tegra.c | 29 +++++++++++++++++++++++++++++
>   1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 1c8c24ae54ed..f324cf3b1f28 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -1814,7 +1814,36 @@ static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
>   	.has_interface_timing_reg = true,
>   };
>   
> +static const struct tegra_i2c_hw_feature tegra264_i2c_hw = {
> +	.has_continue_xfer_support = true,
> +	.has_per_pkt_xfer_complete_irq = true,
> +	.clk_divisor_hs_mode = 1,
> +	.clk_divisor_std_mode = 0x1d,
> +	.clk_divisor_fast_mode = 0x15,
> +	.clk_divisor_fast_plus_mode = 0x8,
> +	.has_config_load_reg = true,
> +	.has_multi_master_mode = true,
> +	.has_slcg_override_reg = true,
> +	.has_mst_fifo = true,
> +	.quirks = &tegra194_i2c_quirks,
> +	.supports_bus_clear = true,
> +	.has_apb_dma = false,
> +	.tlow_std_mode = 0x8,
> +	.thigh_std_mode = 0x7,
> +	.tlow_fast_fastplus_mode = 0x2,
> +	.thigh_fast_fastplus_mode = 0x2,
> +	.tlow_hs_mode = 0x4,
> +	.thigh_hs_mode = 0x2,
> +	.setup_hold_time_std_mode = 0x08080808,
> +	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
> +	.setup_hold_time_hs_mode = 0x090909,
> +	.has_interface_timing_reg = true,
> +	.has_hs_mode_support = true,
> +	.has_mutex = true,
> +};
> +
>   static const struct of_device_id tegra_i2c_of_match[] = {
> +	{ .compatible = "nvidia,tegra264-i2c", .data = &tegra264_i2c_hw, },
>   	{ .compatible = "nvidia,tegra256-i2c", .data = &tegra256_i2c_hw, },
>   	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
>   	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },


Reviewed-by: Jon Hunter <jonathanh@nvidia.com>

Jon

-- 
nvpublic