Airoha snfi spi controller supports acceleration of DUAL/QUAD
operations, but does not supports DUAL_IO/QUAD_IO operations.
Luckily DUAL/QUAD operations do the same as DUAL_IO/QUAD_IO ones,
so we can issue corresponding DUAL/QUAD operation instead of
DUAL_IO/QUAD_IO one.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/spi/spi-airoha-snfi.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-airoha-snfi.c b/drivers/spi/spi-airoha-snfi.c
index e90fab69d81e..744eeb2b24ef 100644
--- a/drivers/spi/spi-airoha-snfi.c
+++ b/drivers/spi/spi-airoha-snfi.c
@@ -147,6 +147,8 @@
#define SPI_NFI_CUS_SEC_SIZE_EN BIT(16)
#define REG_SPI_NFI_RD_CTL2 0x0510
+#define SPI_NFI_DATA_READ_CMD GENMASK(7, 0)
+
#define REG_SPI_NFI_RD_CTL3 0x0514
#define REG_SPI_NFI_PG_CTL1 0x0524
@@ -179,7 +181,9 @@
#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE 0x03
#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST 0x0b
#define SPI_NAND_OP_READ_FROM_CACHE_DUAL 0x3b
+#define SPI_NAND_OP_READ_FROM_CACHE_DUALIO 0xbb
#define SPI_NAND_OP_READ_FROM_CACHE_QUAD 0x6b
+#define SPI_NAND_OP_READ_FROM_CACHE_QUADIO 0xeb
#define SPI_NAND_OP_WRITE_ENABLE 0x06
#define SPI_NAND_OP_WRITE_DISABLE 0x04
#define SPI_NAND_OP_PROGRAM_LOAD_SINGLE 0x02
@@ -664,26 +668,38 @@ static int airoha_snand_dirmap_create(struct spi_mem_dirmap_desc *desc)
static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
u64 offs, size_t len, void *buf)
{
- struct spi_mem_op *op = &desc->info.op_tmpl;
struct spi_device *spi = desc->mem->spi;
struct airoha_snand_ctrl *as_ctrl;
u8 *txrx_buf = spi_get_ctldata(spi);
dma_addr_t dma_addr;
- u32 val, rd_mode;
+ u32 val, rd_mode, opcode;
int err;
as_ctrl = spi_controller_get_devdata(spi->controller);
- switch (op->cmd.opcode) {
+ /*
+ * DUALIO and QUADIO opcodes are not supported by the spi controller,
+ * replace them with supported opcodes.
+ */
+ opcode = desc->info.op_tmpl.cmd.opcode;
+ switch (opcode) {
+ case SPI_NAND_OP_READ_FROM_CACHE_SINGLE:
+ case SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST:
+ rd_mode = 0;
+ break;
case SPI_NAND_OP_READ_FROM_CACHE_DUAL:
+ case SPI_NAND_OP_READ_FROM_CACHE_DUALIO:
+ opcode = SPI_NAND_OP_READ_FROM_CACHE_DUAL;
rd_mode = 1;
break;
case SPI_NAND_OP_READ_FROM_CACHE_QUAD:
+ case SPI_NAND_OP_READ_FROM_CACHE_QUADIO:
+ opcode = SPI_NAND_OP_READ_FROM_CACHE_QUAD;
rd_mode = 2;
break;
default:
- rd_mode = 0;
- break;
+ /* unknown opcode */
+ return -EOPNOTSUPP;
}
err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
@@ -717,7 +733,7 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
/* set read command */
err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_RD_CTL2,
- op->cmd.opcode);
+ FIELD_PREP(SPI_NFI_DATA_READ_CMD, opcode));
if (err)
goto error_dma_unmap;
--
2.51.0