From: Alexander Martinz <amartinz@shiftphones.com>
Make sure the nodes are sorted correctly, and the indentation is
correct.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index eb8efba1b9dda422dd0295db2a52420a1a23d070..8d45e6ac0e445b9e20bb9c1520f804623c505653 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -857,7 +857,7 @@ &uart5 {
&uart7 {
/delete-property/interrupts;
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
- <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
pinctrl-names = "default", "sleep";
@@ -920,10 +920,6 @@ &usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_dp_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss_in>;
-};
-
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l10c>;
vdda18-supply = <&vreg_l1c>;
@@ -950,6 +946,10 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
&wifi {
qcom,calibration-variant = "SHIFTphone_8";
--
2.51.0