The original reset list only works for USB-only PHYs. USB3DP PHYs require
different reset names such as "dp_phy", so they need a separate list.

Moving reset configuration into qmp_phy_cfg allows per-PHY customization
without adding special-case logic in DT parsing. The legacy DT path keeps
using the old hardcoded list, while non-legacy paths use cfg->reset_list.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index 3b48c69f9c3cb7daec495ebc281b83fe34e56881..f9e20f43435c050e33e9490343a4693a339d692a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -335,7 +335,8 @@ struct qmp_phy_cfg {
 	int (*configure_dp_phy)(struct qmp_usbc *qmp);
 	int (*calibrate_dp_phy)(struct qmp_usbc *qmp);
 
-	/* regulators to be requested */
+	const char * const *reset_list;
+	int num_resets;
 	const struct regulator_bulk_data *vreg_list;
 	int num_vregs;
 
@@ -464,6 +465,8 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 	.rx_tbl_num             = ARRAY_SIZE(msm8998_usb3_rx_tbl),
 	.pcs_tbl                = msm8998_usb3_pcs_tbl,
 	.pcs_tbl_num            = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+	.reset_list		= usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
 	.vreg_list              = qmp_phy_msm8998_vreg_l,
 	.num_vregs              = ARRAY_SIZE(qmp_phy_msm8998_vreg_l),
 	.regs                   = qmp_v3_usb3phy_regs_layout,
@@ -480,6 +483,8 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_rx_tbl),
 	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+	.reset_list		= usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
 	.vreg_list		= qmp_phy_sm2290_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_sm2290_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
@@ -496,6 +501,8 @@ static const struct qmp_phy_cfg sdm660_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sdm660_usb3_rx_tbl),
 	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+	.reset_list		= usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
 	.vreg_list		= qmp_phy_msm8998_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_msm8998_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
@@ -512,6 +519,8 @@ static const struct qmp_phy_cfg qcs615_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_rx_tbl),
 	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+	.reset_list		= usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
 	.vreg_list		= qmp_phy_qcs615_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_qcs615_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
@@ -1051,8 +1060,7 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
 				     "failed to get pipe clock\n");
 	}
 
-	ret = qmp_usbc_reset_init(qmp, usb3phy_reset_l,
-				 ARRAY_SIZE(usb3phy_reset_l));
+	ret = qmp_usbc_reset_init(qmp, cfg->reset_list, cfg->num_resets);
 	if (ret)
 		return ret;
 

-- 
2.34.1