[PATCH v2 0/7] Add ADCs support for RZ/T2H and RZ/N2H

Cosmin Tanislav posted 7 patches 5 days, 23 hours ago
There is a newer version of this series
.../iio/adc/renesas,r9a09g077-adc.yaml        | 160 +++++++++
MAINTAINERS                                   |   8 +
arch/arm64/boot/dts/renesas/r9a09g077.dtsi    |  69 ++++
.../dts/renesas/r9a09g077m44-rzt2h-evk.dts    |  28 ++
arch/arm64/boot/dts/renesas/r9a09g087.dtsi    |  69 ++++
.../dts/renesas/r9a09g087m44-rzn2h-evk.dts    |  64 ++++
.../dts/renesas/rzt2h-n2h-evk-common.dtsi     |  79 +++++
arch/arm64/configs/defconfig                  |   1 +
drivers/clk/renesas/r9a09g077-cpg.c           |   3 +
drivers/iio/adc/Kconfig                       |  10 +
drivers/iio/adc/Makefile                      |   1 +
drivers/iio/adc/rzt2h_adc.c                   | 306 ++++++++++++++++++
12 files changed, 798 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
create mode 100644 drivers/iio/adc/rzt2h_adc.c
[PATCH v2 0/7] Add ADCs support for RZ/T2H and RZ/N2H
Posted by Cosmin Tanislav 5 days, 23 hours ago
Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
12-Bit successive approximation A/D converters.

RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.

Add support for them.

V2:
 * pick up Reviewed-by from Geert
 * dt-bindings: move required after patternProperties
 * dt-bindings: describe 16 channels, but limit per-SoC to 6 / 15
 * dt-bindings: use uppercase for clock descriptions
 * remove max-channels property and find it from parsed channel subnodes
 * remove start/stop wrappers
 * stop calibration even on failure
 * move data reading to rzt2h_adc_read_single() instead of interrupt
 * handler

Cosmin Tanislav (7):
  clk: renesas: r9a09g077: Add ADC modules clock
  dt-bindings: iio: adc: document RZ/T2H and RZ/N2H ADC
  iio: adc: add RZ/T2H / RZ/N2H ADC driver
  arm64: dts: renesas: r9a09g077: Add ADCs support
  arm64: dts: renesas: r9a09g087: Add ADCs support
  arm64: dts: renesas: rzt2h/rzn2h-evk: enable ADCs
  arm64: defconfig: enable RZ/T2H / RZ/N2H ADC driver

 .../iio/adc/renesas,r9a09g077-adc.yaml        | 160 +++++++++
 MAINTAINERS                                   |   8 +
 arch/arm64/boot/dts/renesas/r9a09g077.dtsi    |  69 ++++
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    |  28 ++
 arch/arm64/boot/dts/renesas/r9a09g087.dtsi    |  69 ++++
 .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    |  64 ++++
 .../dts/renesas/rzt2h-n2h-evk-common.dtsi     |  79 +++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/r9a09g077-cpg.c           |   3 +
 drivers/iio/adc/Kconfig                       |  10 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/rzt2h_adc.c                   | 306 ++++++++++++++++++
 12 files changed, 798 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
 create mode 100644 drivers/iio/adc/rzt2h_adc.c

-- 
2.51.0
Re: [PATCH v2 0/7] Add ADCs support for RZ/T2H and RZ/N2H
Posted by Rob Herring (Arm) 5 days, 6 hours ago
On Fri, 26 Sep 2025 01:40:02 +0300, Cosmin Tanislav wrote:
> Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
> 12-Bit successive approximation A/D converters.
> 
> RZ/T2H has two ADCs with 4 channels and one with 6.
> RZ/N2H has two ADCs with 4 channels and one with 15.
> 
> Add support for them.
> 
> V2:
>  * pick up Reviewed-by from Geert
>  * dt-bindings: move required after patternProperties
>  * dt-bindings: describe 16 channels, but limit per-SoC to 6 / 15
>  * dt-bindings: use uppercase for clock descriptions
>  * remove max-channels property and find it from parsed channel subnodes
>  * remove start/stop wrappers
>  * stop calibration even on failure
>  * move data reading to rzt2h_adc_read_single() instead of interrupt
>  * handler
> 
> Cosmin Tanislav (7):
>   clk: renesas: r9a09g077: Add ADC modules clock
>   dt-bindings: iio: adc: document RZ/T2H and RZ/N2H ADC
>   iio: adc: add RZ/T2H / RZ/N2H ADC driver
>   arm64: dts: renesas: r9a09g077: Add ADCs support
>   arm64: dts: renesas: r9a09g087: Add ADCs support
>   arm64: dts: renesas: rzt2h/rzn2h-evk: enable ADCs
>   arm64: defconfig: enable RZ/T2H / RZ/N2H ADC driver
> 
>  .../iio/adc/renesas,r9a09g077-adc.yaml        | 160 +++++++++
>  MAINTAINERS                                   |   8 +
>  arch/arm64/boot/dts/renesas/r9a09g077.dtsi    |  69 ++++
>  .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    |  28 ++
>  arch/arm64/boot/dts/renesas/r9a09g087.dtsi    |  69 ++++
>  .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    |  64 ++++
>  .../dts/renesas/rzt2h-n2h-evk-common.dtsi     |  79 +++++
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/clk/renesas/r9a09g077-cpg.c           |   3 +
>  drivers/iio/adc/Kconfig                       |  10 +
>  drivers/iio/adc/Makefile                      |   1 +
>  drivers/iio/adc/rzt2h_adc.c                   | 306 ++++++++++++++++++
>  12 files changed, 798 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
>  create mode 100644 drivers/iio/adc/rzt2h_adc.c
> 
> --
> 2.51.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/next-20250925 (best guess, 2/10 blobs matched)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/renesas/' for 20250925224013.2146983-1-cosmin-gabriel.tanislav.xa@renesas.com:

arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dtb: adc@90014000 (renesas,r9a09g077-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dtb: adc@90014400 (renesas,r9a09g077-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dtb: adc@80008000 (renesas,r9a09g077-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dtb: adc@90014000 (renesas,r9a09g087-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dtb: adc@90014400 (renesas,r9a09g087-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dtb: adc@80008000 (renesas,r9a09g087-adc): 'renesas,max-channels' does not match any of the regexes: '^channel@[0-9a-f]$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#