Introduce Airoha AN7583 SoC initial DTSI and AN7583 Evaluation Board
DTS and add the required entry in the Makefile.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm64/boot/dts/airoha/Makefile | 1 +
arch/arm64/boot/dts/airoha/an7583-evb.dts | 22 ++
arch/arm64/boot/dts/airoha/an7583.dtsi | 283 ++++++++++++++++++++++
3 files changed, 306 insertions(+)
create mode 100644 arch/arm64/boot/dts/airoha/an7583-evb.dts
create mode 100644 arch/arm64/boot/dts/airoha/an7583.dtsi
diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
index ebea112ce1d7..7a604ae249b5 100644
--- a/arch/arm64/boot/dts/airoha/Makefile
+++ b/arch/arm64/boot/dts/airoha/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += an7583-evb.dtb
diff --git a/arch/arm64/boot/dts/airoha/an7583-evb.dts b/arch/arm64/boot/dts/airoha/an7583-evb.dts
new file mode 100644
index 000000000000..910ceaa6af42
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/an7583-evb.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "an7583.dtsi"
+
+/ {
+ model = "Airoha AN7583 Evaluation Board";
+ compatible = "airoha,an7583-evb", "airoha,an7583";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/airoha/an7583.dtsi b/arch/arm64/boot/dts/airoha/an7583.dtsi
new file mode 100644
index 000000000000..77b8590e242b
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/an7583.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ operating-points-v2 = <&cpu_opp_table>;
+ enable-method = "psci";
+ clocks = <&cpufreq>;
+ clock-names = "cpu";
+ power-domains = <&cpufreq>;
+ power-domain-names = "perf";
+ next-level-cache = <&l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
+ enable-method = "psci";
+ clocks = <&cpufreq>;
+ clock-names = "cpu";
+ power-domains = <&cpufreq>;
+ power-domain-names = "perf";
+ next-level-cache = <&l2>;
+ #cooling-cells = <2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ cpufreq: cpufreq {
+ compatible = "airoha,en7581-cpufreq";
+
+ operating-points-v2 = <&smcc_opp_table>;
+
+ #power-domain-cells = <0>;
+ #clock-cells = <0>;
+ };
+
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&smcc_opp0>;
+ };
+
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ required-opps = <&smcc_opp1>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&smcc_opp2>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&smcc_opp3>;
+ };
+
+ opp-7000000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ required-opps = <&smcc_opp4>;
+ };
+
+ opp-7500000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ required-opps = <&smcc_opp5>;
+ };
+
+ opp-8000000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ required-opps = <&smcc_opp6>;
+ };
+
+ opp-8500000000 {
+ opp-hz = /bits/ 64 <850000000>;
+ required-opps = <&smcc_opp7>;
+ };
+
+ opp-9000000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ required-opps = <&smcc_opp8>;
+ };
+
+ opp-9500000000 {
+ opp-hz = /bits/ 64 <950000000>;
+ required-opps = <&smcc_opp9>;
+ };
+
+ opp-10000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ required-opps = <&smcc_opp10>;
+ };
+
+ opp-10500000000 {
+ opp-hz = /bits/ 64 <1050000000>;
+ required-opps = <&smcc_opp11>;
+ };
+
+ opp-11000000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ required-opps = <&smcc_opp12>;
+ };
+
+ opp-11500000000 {
+ opp-hz = /bits/ 64 <1150000000>;
+ required-opps = <&smcc_opp13>;
+ };
+
+ opp-12000000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ required-opps = <&smcc_opp14>;
+ };
+ };
+
+ smcc_opp_table: opp-table-smcc {
+ compatible = "operating-points-v2";
+
+ smcc_opp0: opp-0 {
+ opp-level = <0>;
+ };
+
+ smcc_opp1: opp-1 {
+ opp-level = <1>;
+ };
+
+ smcc_opp2: opp-2 {
+ opp-level = <2>;
+ };
+
+ smcc_opp3: opp-3 {
+ opp-level = <3>;
+ };
+
+ smcc_opp4: opp-4 {
+ opp-level = <4>;
+ };
+
+ smcc_opp5: opp-5 {
+ opp-level = <5>;
+ };
+
+ smcc_opp6: opp-6 {
+ opp-level = <6>;
+ };
+
+ smcc_opp7: opp-7 {
+ opp-level = <7>;
+ };
+
+ smcc_opp8: opp-8 {
+ opp-level = <8>;
+ };
+
+ smcc_opp9: opp-9 {
+ opp-level = <9>;
+ };
+
+ smcc_opp10: opp-10 {
+ opp-level = <10>;
+ };
+
+ smcc_opp11: opp-11 {
+ opp-level = <11>;
+ };
+
+ smcc_opp12: opp-12 {
+ opp-level = <12>;
+ };
+
+ smcc_opp13: opp-13 {
+ opp-level = <13>;
+ };
+
+ smcc_opp14: opp-14 {
+ opp-level = <14>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sys_hclk: clk-oscillator-100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sys_hclk";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@9000000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x09000000 0x0 0x20000>,
+ <0x0 0x09080000 0x0 0x80000>,
+ <0x0 0x09400000 0x0 0x2000>,
+ <0x0 0x09500000 0x0 0x2000>,
+ <0x0 0x09600000 0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ crypto@1e004000 {
+ compatible = "airoha,an7583-eip93", "airoha,en7581-eip93",
+ "inside-secure,safexcel-eip93ies";
+ reg = <0x0 0x1fb70000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ uart1: serial@1fbf0000 {
+ compatible = "ns16550";
+ reg = <0x0 0x1fbf0000 0x0 0x30>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1843200>;
+ };
+
+ watchdog@1fbf0100 {
+ compatible = "airoha,an7583-wdt", "airoha,en7581-wdt";
+ reg = <0x0 0x1fbf0100 0x0 0x38>;
+
+ clocks = <&sys_hclk>;
+ clock-names = "bus";
+ };
+ };
+};
--
2.51.0Il 25/09/25 18:40, Christian Marangi ha scritto:
> Introduce Airoha AN7583 SoC initial DTSI and AN7583 Evaluation Board
> DTS and add the required entry in the Makefile.
>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> arch/arm64/boot/dts/airoha/Makefile | 1 +
> arch/arm64/boot/dts/airoha/an7583-evb.dts | 22 ++
> arch/arm64/boot/dts/airoha/an7583.dtsi | 283 ++++++++++++++++++++++
> 3 files changed, 306 insertions(+)
> create mode 100644 arch/arm64/boot/dts/airoha/an7583-evb.dts
> create mode 100644 arch/arm64/boot/dts/airoha/an7583.dtsi
>
> diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
> index ebea112ce1d7..7a604ae249b5 100644
> --- a/arch/arm64/boot/dts/airoha/Makefile
> +++ b/arch/arm64/boot/dts/airoha/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-only
> dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
> +dtb-$(CONFIG_ARCH_AIROHA) += an7583-evb.dtb
an comes before en.... please keep entries ordered alphabetically.
> diff --git a/arch/arm64/boot/dts/airoha/an7583-evb.dts b/arch/arm64/boot/dts/airoha/an7583-evb.dts
> new file mode 100644
> index 000000000000..910ceaa6af42
> --- /dev/null
> +++ b/arch/arm64/boot/dts/airoha/an7583-evb.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/dts-v1/;
> +
> +#include "an7583.dtsi"
> +
> +/ {
> + model = "Airoha AN7583 Evaluation Board";
> + compatible = "airoha,an7583-evb", "airoha,an7583";
> +
> + aliases {
> + serial0 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x2 0x00000000>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/airoha/an7583.dtsi b/arch/arm64/boot/dts/airoha/an7583.dtsi
> new file mode 100644
> index 000000000000..77b8590e242b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/airoha/an7583.dtsi
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + cpus {
..snip..
Sorry for not catching that in v2 - please move the PSCI node here, after which:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
© 2016 - 2025 Red Hat, Inc.