[PATCH v4 4/7] drm/rockchip: cdn-dp: Support handle lane info without extcon

Chaoyi Chen posted 7 patches 1 week, 3 days ago
[PATCH v4 4/7] drm/rockchip: cdn-dp: Support handle lane info without extcon
Posted by Chaoyi Chen 1 week, 3 days ago
From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This patch add support for get PHY lane info without help of extcon.

There is no extcon needed if the Type-C controller is present. In this
case, the lane info can be get from PHY instead of extcon.

The extcon device should still be supported if Type-C controller is
not present.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---

Changes in v4:
- Remove cdn_dp_hpd_notify().

(no changes since v3)

Changes in v2:
- Ignore duplicate HPD events.

 drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index b7e3f5dcf8d5..1e27301584a4 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -156,6 +156,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
 	int dptx;
 	u8 lanes;
 
+	if (!edev)
+		return phy_get_bus_width(port->phy);
+
 	dptx = extcon_get_state(edev, EXTCON_DISP_DP);
 	if (dptx > 0) {
 		extcon_get_property(edev, EXTCON_DISP_DP,
@@ -219,7 +222,7 @@ static bool cdn_dp_check_sink_connection(struct cdn_dp_device *dp)
 	 * some docks need more time to power up.
 	 */
 	while (time_before(jiffies, timeout)) {
-		if (!extcon_get_state(port->extcon, EXTCON_DISP_DP))
+		if (port->extcon && !extcon_get_state(port->extcon, EXTCON_DISP_DP))
 			return false;
 
 		if (!cdn_dp_get_sink_count(dp, &sink_count))
@@ -385,11 +388,14 @@ static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
 		goto err_power_on;
 	}
 
-	ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
-				  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
-	if (ret) {
-		DRM_DEV_ERROR(dp->dev, "get property failed\n");
-		goto err_power_on;
+	property.intval = 0;
+	if (port->extcon) {
+		ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
+					  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
+		if (ret) {
+			DRM_DEV_ERROR(dp->dev, "get property failed\n");
+			goto err_power_on;
+		}
 	}
 
 	port->lanes = cdn_dp_get_port_lanes(port);
@@ -1028,6 +1034,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
+		if (!port->extcon)
+			continue;
+
 		port->event_nb.notifier_call = cdn_dp_pd_event;
 		ret = devm_extcon_register_notifier(dp->dev, port->extcon,
 						    EXTCON_DISP_DP,
@@ -1120,14 +1129,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
 		    PTR_ERR(phy) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 
-		if (IS_ERR(extcon) || IS_ERR(phy))
+		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
 			continue;
 
 		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 		if (!port)
 			return -ENOMEM;
 
-		port->extcon = extcon;
+		port->extcon = IS_ERR(extcon) ? NULL : extcon;
 		port->phy = phy;
 		port->dp = dp;
 		port->id = i;
-- 
2.49.0
Re: [PATCH v4 4/7] drm/rockchip: cdn-dp: Support handle lane info without extcon
Posted by Dmitry Baryshkov 1 week, 2 days ago
On Mon, Sep 22, 2025 at 09:20:36AM +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> 
> This patch add support for get PHY lane info without help of extcon.
> 
> There is no extcon needed if the Type-C controller is present. In this
> case, the lane info can be get from PHY instead of extcon.
> 
> The extcon device should still be supported if Type-C controller is
> not present.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> ---
> 
> Changes in v4:
> - Remove cdn_dp_hpd_notify().
> 
> (no changes since v3)
> 
> Changes in v2:
> - Ignore duplicate HPD events.
> 
>  drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
>  1 file changed, 17 insertions(+), 8 deletions(-)
> 
> @@ -1120,14 +1129,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
>  		    PTR_ERR(phy) == -EPROBE_DEFER)
>  			return -EPROBE_DEFER;
>  
> -		if (IS_ERR(extcon) || IS_ERR(phy))
> +		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
>  			continue;

This will break the case when the extcon is present. It should be
(IS_ERR(extcon) && PTR_ERR(extcon) != -ENODEV)

>  
>  		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
>  		if (!port)
>  			return -ENOMEM;
>  
> -		port->extcon = extcon;
> +		port->extcon = IS_ERR(extcon) ? NULL : extcon;
>  		port->phy = phy;
>  		port->dp = dp;
>  		port->id = i;
> -- 
> 2.49.0
> 

-- 
With best wishes
Dmitry
Re: [PATCH v4 4/7] drm/rockchip: cdn-dp: Support handle lane info without extcon
Posted by Chaoyi Chen 1 week, 2 days ago
On 9/22/2025 6:01 PM, Dmitry Baryshkov wrote:

> On Mon, Sep 22, 2025 at 09:20:36AM +0800, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> This patch add support for get PHY lane info without help of extcon.
>>
>> There is no extcon needed if the Type-C controller is present. In this
>> case, the lane info can be get from PHY instead of extcon.
>>
>> The extcon device should still be supported if Type-C controller is
>> not present.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>> ---
>>
>> Changes in v4:
>> - Remove cdn_dp_hpd_notify().
>>
>> (no changes since v3)
>>
>> Changes in v2:
>> - Ignore duplicate HPD events.
>>
>>   drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
>>   1 file changed, 17 insertions(+), 8 deletions(-)
>>
>> @@ -1120,14 +1129,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
>>   		    PTR_ERR(phy) == -EPROBE_DEFER)
>>   			return -EPROBE_DEFER;
>>   
>> -		if (IS_ERR(extcon) || IS_ERR(phy))
>> +		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
>>   			continue;
> This will break the case when the extcon is present. It should be
> (IS_ERR(extcon) && PTR_ERR(extcon) != -ENODEV)

Yes, will fix in v5


>
>>   
>>   		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
>>   		if (!port)
>>   			return -ENOMEM;
>>   
>> -		port->extcon = extcon;
>> +		port->extcon = IS_ERR(extcon) ? NULL : extcon;
>>   		port->phy = phy;
>>   		port->dp = dp;
>>   		port->id = i;
>> -- 
>> 2.49.0
>>
-- 
Best,
Chaoyi