Add clocks and introduce the CRU (Clock and Reset) unit node
for Anlogic DR1V90 SoC, providing both clock and reset support.

The DR1V90 SoC uses three external clocks:
- A 33 MHz crystal oscillator as the main system clock.
- Two optional external clocks (via IO) for the CAN and WDT modules.

Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
---
 arch/riscv/boot/dts/anlogic/dr1v90.dtsi | 41 +++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/anlogic/dr1v90.dtsi b/arch/riscv/boot/dts/anlogic/dr1v90.dtsi
index f9f8754ceb5247d3ca25e6a65b3f915916ba6173..6458093dcf27afd640265aa07be9b93d6cb72f8a 100644
--- a/arch/riscv/boot/dts/anlogic/dr1v90.dtsi
+++ b/arch/riscv/boot/dts/anlogic/dr1v90.dtsi
@@ -3,6 +3,9 @@
  * Copyright (C) 2025 Junhui Liu <junhui.liu@pigmoral.tech>
  */
 
+#include <dt-bindings/clock/anlogic,dr1v90-cru.h>
+#include <dt-bindings/reset/anlogic,dr1v90-cru.h>
+
 /dts-v1/;
 / {
 	#address-cells = <2>;
@@ -39,6 +42,27 @@ cpu0_intc: interrupt-controller {
 		};
 	};
 
+	clocks {
+		can_ext: clock-ext-can {
+			compatible = "fixed-clock";
+			clock-output-names = "can_ext";
+			#clock-cells = <0>;
+		};
+
+		osc_33m: clock-33m {
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+			clock-output-names = "osc_33m";
+			#clock-cells = <0>;
+		};
+
+		wdt_ext: clock-ext-wdt {
+			compatible = "fixed-clock";
+			clock-output-names = "wdt_ext";
+			#clock-cells = <0>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -65,21 +89,34 @@ plic: interrupt-controller@6c000000 {
 		uart0: serial@f8400000 {
 			compatible = "anlogic,dr1v90-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xf8400000 0x0 0x1000>;
-			clock-frequency = <50000000>;
+			clocks = <&cru CLK_IO_400M_DIV8>, <&cru CLK_CPU_1X>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <71>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
+			resets = <&cru RESET_UART0>;
 			status = "disabled";
 		};
 
 		uart1: serial@f8401000 {
 			compatible = "anlogic,dr1v90-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xf8401000 0x0 0x1000>;
-			clock-frequency = <50000000>;
+			clocks = <&cru CLK_IO_400M_DIV8>, <&cru CLK_CPU_1X>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <72>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
+			resets = <&cru RESET_UART1>;
 			status = "disabled";
 		};
+
+		cru: clock-controller@f8801000 {
+			compatible = "anlogic,dr1v90-cru";
+			reg = <0x0 0xf8801000 0 0x400>;
+			clocks = <&osc_33m>, <&can_ext>, <&wdt_ext>;
+			clock-names = "osc_33m", "can_ext", "wdt_ext";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 };

-- 
2.51.0