From: Elliot Berman <elliot.berman@oss.qualcomm.com>

Add support for SYSTEM_RESET2 vendor-specific resets in
qcs6490-rb3gen2 as reboot-modes.  Describe the resets:
"bootloader" will cause device to reboot and stop in the
bootloader's fastboot mode. "edl" will cause device to reboot
into "emergency download mode", which permits loading images via
the Firehose protocol.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Elliot Berman <elliot.berman@oss.qualcomm.com>
Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 18cea8812001421456dc85547c3c711e2c42182a..f38fa2e52a635100a7505c615c0e96f1111d0b5a 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -975,6 +975,13 @@ &pon_resin {
 	status = "okay";
 };
 
+&psci {
+	reboot-mode {
+		mode-bootloader = <0x10001 0x2>;
+		mode-edl = <0 0x1>;
+	};
+};
+
 &qup_uart7_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power

-- 
2.34.1