1. Patchew
  2. linux
  3. View series

[PATCH v2] USB: serial: option: add SIMCom 8230C compositions

xiaowei.li posted 1 patch 2 weeks ago
There is a newer version of this series
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
[PATCH v2] USB: serial: option: add SIMCom 8230C compositions
Posted by xiaowei.li 2 weeks ago 
USB Device Listings:
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9071 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9078 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=907b Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fc869b7f803f..8eadcfe33ecd 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2114,6 +2114,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE(0x1e0e, 0x9071),
+	  .driver_info = RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff),
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
-- 
2.34.1
Re: [PATCH v2] USB: serial: option: add SIMCom 8230C compositions
Posted by Johan Hovold 1 week, 2 days ago 
On Wed, Sep 17, 2025 at 06:53:42PM +0800, xiaowei.li wrote:

Thanks for the v2.

Checkpatch complains that your From (author) name does not match you
SoB (a period '.' instead of space and no capitalisation). Could you fix
your mailer (or add a From line to the patch) so that the author
information in the logs will look correct?

Please consider adding an introductory sentence here (e.g. "Add the
following compositions for device X:").

> USB Device Listings:

> Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
> ---

And when updating patches you should put a short changelog here under
the --- line.

>  drivers/usb/serial/option.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index fc869b7f803f..8eadcfe33ecd 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -2114,6 +2114,12 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
>  	  .driver_info = RSVD(7) },
> +	{ USB_DEVICE(0x1e0e, 0x9071),
> +	  .driver_info = RSVD(3) | RSVD(4) },
> +	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),
> +	  .driver_info = RSVD(5) },
> +	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff),
> +	  .driver_info = RSVD(5) },

And please add a comment after these entries with the device and mode
(like the surrounding entries have).

>  	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
>  	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),

Looks all good otherwise.

Johan
Re: [PATCH v2] USB: serial: option: add SIMCom 8230C compositions
Posted by xiaowei.li@simcom.com 1 week, 1 day ago 
Hi Johan,

Thanks for the feedback. I have addressed the issues in v2:
- Fixed the From and Signed-off-by mismatch.
- Added an introductory sentence in the commit message.
- Added comments for the new USB device entries.
- Included a changelog below the --- line.

Please find the updated patch attached. Let me know if there are any 
further comments.

Best regards,
Xiaowei Li

在 2025/9/23 15:43, Johan Hovold 写道:
> On Wed, Sep 17, 2025 at 06:53:42PM +0800, xiaowei.li wrote:
> 
> Thanks for the v2.
> 
> Checkpatch complains that your From (author) name does not match you
> SoB (a period '.' instead of space and no capitalisation). Could you fix
> your mailer (or add a From line to the patch) so that the author
> information in the logs will look correct?
> 
> Please consider adding an introductory sentence here (e.g. "Add the
> following compositions for device X:").
> 
>> USB Device Listings:
> 
>> Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
>> ---
> 
> And when updating patches you should put a short changelog here under
> the --- line.
> 
>>   drivers/usb/serial/option.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
>> index fc869b7f803f..8eadcfe33ecd 100644
>> --- a/drivers/usb/serial/option.c
>> +++ b/drivers/usb/serial/option.c
>> @@ -2114,6 +2114,12 @@ static const struct usb_device_id option_ids[] = {
>>   	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
>>   	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
>>   	  .driver_info = RSVD(7) },
>> +	{ USB_DEVICE(0x1e0e, 0x9071),
>> +	  .driver_info = RSVD(3) | RSVD(4) },
>> +	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),
>> +	  .driver_info = RSVD(5) },
>> +	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff),
>> +	  .driver_info = RSVD(5) },
> 
> And please add a comment after these entries with the device and mode
> (like the surrounding entries have).
> 
>>   	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
>>   	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
>>   	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
> 
> Looks all good otherwise.
> 
> Johan
> 
From 59a42bb5052303a5a8d10e4e9f7362ed11fd36dc Mon Sep 17 00:00:00 2001
From: Xiaowei Li <xiaowei.li@simcom.com>
Date: Wed, 17 Sep 2025 18:51:23 +0800
Subject: [PATCH v3] USB: serial: option: add SIMCom 8230C compositions

Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
USB Device Listings:
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9071 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9078 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=907b Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
---
Changelog:
v3:
- Fixed From and Signed-off-by mismatch.
- Added introductory sentence in commit message.
- Added comments for new USB device entries.

 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fc869b7f803f..d6616d635c9f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2114,6 +2114,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE(0x1e0e, 0x9071),	/* Simcom SIM8230 RMNET mode */
+	  .driver_info = RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),	/* Simcom SIM8230 ECM mode */
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff),	/* Simcom SIM8230 RNDIS mode */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
-- 
2.34.1

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.