From: Dang Huynh <dang.huynh@mainlining.org>

Add SDMMC1 and 2 controllers for the RDA8810PL platform.

Signed-off-by: Dang Huynh <dang.huynh@mainlining.org>
---
 arch/arm/boot/dts/unisoc/rda8810pl.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/unisoc/rda8810pl.dtsi b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
index 4b3ae19e9da41ee9ffa76dd4fff01824c07ce045..e68f8330ce2c4750b6944612bee03b42694137e4 100644
--- a/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
+++ b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/rda,8810pl-apclk.h>
+#include <dt-bindings/dma/rda-ifc.h>
 
 / {
 	compatible = "rda,8810pl";
@@ -199,6 +200,30 @@ uart1: serial@0 {
 			status = "disabled";
 		};
 
+		mmc1: mmc@50000 {
+			compatible = "rda,8810pl-mmc";
+			reg = <0x50000 0x1000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ap_syscon CLK_APB2>;
+			clock-names = "apb";
+			resets = <&ap_syscon RST_APB2_SDMMC1>;
+			dmas = <&ifc IFC_SDMMC1_TX>, <&ifc IFC_SDMMC1_RX>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@60000 {
+			compatible = "rda,8810pl-mmc";
+			reg = <0x60000 0x1000>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ap_syscon CLK_APB2>;
+			clock-names = "apb";
+			resets = <&ap_syscon RST_APB2_SDMMC2>;
+			dmas = <&ifc IFC_SDMMC2_TX>, <&ifc IFC_SDMMC2_RX>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		uart2: serial@10000 {
 			compatible = "rda,8810pl-uart";
 			reg = <0x10000 0x1000>;

-- 
2.51.0