On 17/09/2025 22:25, Dang Huynh via B4 Relay wrote:
> From: Dang Huynh <dang.huynh@mainlining.org>
>
> Add documentation describing the SD/MMC controller in RDA Micro
> RDA8810PL SoC.
>
> Signed-off-by: Dang Huynh <dang.huynh@mainlining.org>
> ---
> Documentation/devicetree/bindings/mmc/rda,mmc.yaml | 91 ++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/rda,mmc.yaml b/Documentation/devicetree/bindings/mmc/rda,mmc.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..dfdd9c6d3044061c342519e35e39c7751874bb03
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/rda,mmc.yaml
filename based on compatible.
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/rda,mmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RDA Micro SD/MMC Controller
> +
> +allOf:
> + - $ref: mmc-controller.yaml
> +
> +maintainers:
> + - Dang Huynh <dang.huynh@mainlining.org>
> +
> +properties:
> + compatible:
> + const: rda,8810pl-mmc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: apb
> +
> + resets:
> + maxItems: 1
> +
> + dmas:
> + minItems: 2
Drop
> + maxItems: 2
> +
> + dma-names:
> + items:
> + - const: tx
> + - const: rx
> +
> + rda,mclk-adj:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + description:
> + Some board need MCLK to be adjusted for the card to work.
> + If not present, MCLK will be handled by an external PCLK.
Adjusted for what? What is the value exactly? Where is the MCLK located?
> + minimum: 0
> + maximum: 255
> +
> + rda,mclk-inv:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Some board need MCLK to be inverted for the card to work.
> + If not present, MCLK is not inverted.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - dmas
> + - dma-names
> + - vmmc-supply
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/rda,8810pl-apclk.h>
> + #include <dt-bindings/dma/rda-ifc.h>
> + mmc1: mmc@20950000 {
Drop unused label.
> + compatible = "rda,8810pl-mmc";
> + reg = <0x20950000 0x1000>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ap_syscon CLK_APB2>;
> + clock-names = "apb";
> + resets = <&ap_syscon RST_APB2_SDMMC1>;
> + dmas = <&ifc IFC_SDMMC1_TX>, <&ifc IFC_SDMMC1_RX>;
> + dma-names = "tx", "rx";
> + vmmc-supply = <&vdd_sdmmc>;
> + rda,mclk-adj = /bits/ 8 <1>;
> + rda,mclk-inv;
> + status = "disabled";
Cannot be disabled.
Best regards,
Krzysztof