Use devm_mutex_init() to initialize the mutex to handle automatically
freeing in debug builds.
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
drivers/iio/adc/ad7124.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 9ace3e0914f5acab695c0382df758f56f333ae72..9d9250274b9a02e2982e6ceda27009a84413dc2f 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -1482,7 +1482,10 @@ static int ad7124_setup(struct ad7124_state *st)
st->adc_control &= ~AD7124_ADC_CONTROL_MODE;
st->adc_control |= FIELD_PREP(AD7124_ADC_CONTROL_MODE, AD_SD_MODE_IDLE);
- mutex_init(&st->cfgs_lock);
+ ret = devm_mutex_init(dev, &st->cfgs_lock);
+ if (ret)
+ return ret;
+
INIT_KFIFO(st->live_cfgs_fifo);
for (i = 0; i < st->num_channels; i++) {
struct ad7124_channel_config *cfg = &st->channels[i].cfg;
---
base-commit: 561285d048053fec8a3d6d1e3ddc60df11c393a0
change-id: 20250917-iio-adc-ad7124-use-devm_mutex_init-45a297b1ff8f
Best regards,
--
David Lechner <dlechner@baylibre.com>