From: Dave Stevenson <dave.stevenson@raspberrypi.com>
The RP1 chip has the Cadence GEM block, but wants the tx_clock
to always run at 125MHz, in the same way as sama7g5.
Add the relevant configuration.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
---
changes in v3:
- Added Reviewed-by and Acked-by tags.
- Split the patch from the original series.
drivers/net/ethernet/cadence/macb_main.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 36717e7e5811..260fdac46f4b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -5135,6 +5135,17 @@ static const struct macb_config versal_config = {
.usrio = &macb_default_usrio,
};
+static const struct macb_config raspberrypi_rp1_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
+ MACB_CAPS_JUMBO |
+ MACB_CAPS_GEM_HAS_PTP,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .usrio = &macb_default_usrio,
+ .jumbo_max_len = 10240,
+};
+
static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
{ .compatible = "cdns,macb" },
@@ -5155,6 +5166,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
{ .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
+ { .compatible = "raspberrypi,rp1-gem", .data = &raspberrypi_rp1_config },
{ .compatible = "xlnx,zynqmp-gem", .data = &zynqmp_config},
{ .compatible = "xlnx,zynq-gem", .data = &zynq_config },
{ .compatible = "xlnx,versal-gem", .data = &versal_config},
--
2.47.0