Enable SPI NOR node for PioneerBox device tree
According to PioneerBox schematic, SPI-NOR Flash cannot support QSPI
due to hardware design. Thus spi-(tx|rx)-bus-width must be set to 1.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
---
.../riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index ef3a602172b1e5bf3dcf54a8cacdad5172b7f50e..93fb493995522a88d61de67fa570631c01807718 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -138,6 +138,30 @@ &sd {
status = "okay";
};
+&spifmc0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+};
+
+&spifmc1 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+};
+
&uart0 {
pinctrl-0 = <&uart0_cfg>;
pinctrl-names = "default";
--
2.51.0