On Tue, Sep 16, 2025 at 06:09:47PM -0700, Paul Sajna wrote:
> in accordance with:
> https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
Please don't continue commit subject into commit message. It should be a
separate complete text.
>
> Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 124 ++++++++++++-------------
> 1 file changed, 62 insertions(+), 62 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> index 99dafc6716e76e25aad0755e6004dc952779689f..82d6543835324ed92300c4ed24c51f4b79321f99 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> @@ -38,11 +38,6 @@ reserved-memory {
> #size-cells = <2>;
> ranges;
>
> - qseecom_mem: memory@b2000000 {
> - reg = <0 0xb2000000 0 0x1800000>;
> - no-map;
> - };
> -
> gpu_mem: memory@8c415000 {
> reg = <0 0x8c415000 0 0x2000>;
> no-map;
> @@ -99,6 +94,11 @@ memory@9d400000 {
> no-map;
> };
>
> + qseecom_mem: memory@b2000000 {
> + reg = <0 0xb2000000 0 0x1800000>;
> + no-map;
> + };
> +
> /* rmtfs lower guard */
> memory@f0800000 {
> reg = <0 0xf0800000 0 0x1000>;
> @@ -482,14 +482,22 @@ &mss_pil {
> status = "okay";
> };
>
> +&pm8998_gpios {
> + vol_up_pin_a: vol-up-active-state {
> + pins = "gpio6";
> + function = "normal";
> + input-enable;
> + bias-pull-up;
> + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
> + };
> +};
> +
> &pm8998_resin {
> linux,code = <KEY_VOLUMEDOWN>;
> status = "okay";
> };
>
> &sdhc_2 {
> - status = "okay";
> -
> cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
>
> pinctrl-names = "default";
> @@ -497,55 +505,8 @@ &sdhc_2 {
>
> vmmc-supply = <&vreg_l21a_2p95>;
> vqmmc-supply = <&vddpx_2>;
> -};
> -
> -/*
> - * UFS works partially and only with clk_ignore_unused.
> - * Sometimes it crashes with I/O errors.
> - */
> -&ufs_mem_hc {
> - status = "okay";
> -
> - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> -
> - vcc-supply = <&vreg_l20a_2p95>;
> - vcc-max-microamp = <600000>;
> -};
> -
> -&ufs_mem_phy {
> - status = "okay";
> -
> - vdda-phy-supply = <&vdda_ufs1_core>;
> - vdda-pll-supply = <&vdda_ufs1_1p2>;
> -};
> -
> -&usb_1 {
> - status = "okay";
> -};
> -
> -&usb_1_dwc3 {
> - /* TODO: these devices have usb id pin */
> - dr_mode = "peripheral";
> -};
> -
> -&usb_1_hsphy {
> - status = "okay";
> -
> - vdd-supply = <&vdda_usb1_ss_core>;
> - vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
> - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
> -
> - qcom,imp-res-offset-value = <8>;
> - qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> - qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> - qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> -};
>
> -&usb_1_qmpphy {
> status = "okay";
> -
> - vdda-phy-supply = <&vdda_usb1_ss_1p2>;
> - vdda-pll-supply = <&vdda_usb1_ss_core>;
> };
>
> /* PINCTRL - additions to nodes defined in sdm845.dtsi */
> @@ -586,12 +547,51 @@ sd_card_det_n: sd-card-det-n-state {
> };
> };
>
> -&pm8998_gpios {
> - vol_up_pin_a: vol-up-active-state {
> - pins = "gpio6";
> - function = "normal";
> - input-enable;
> - bias-pull-up;
> - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
> - };
> +/*
> + * UFS works partially and only with clk_ignore_unused.
> + * Sometimes it crashes with I/O errors.
> + */
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l20a_2p95>;
> + vcc-max-microamp = <600000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vdda_ufs1_core>;
> + vdda-pll-supply = <&vdda_ufs1_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + /* TODO: these devices have usb id pin */
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + vdd-supply = <&vdda_usb1_ss_core>;
> + vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
> + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
> +
> + qcom,imp-res-offset-value = <8>;
> + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vdda_usb1_ss_1p2>;
> + vdda-pll-supply = <&vdda_usb1_ss_core>;
> +
> + status = "okay";
> };
>
> --
> 2.51.0
>
--
With best wishes
Dmitry