From: Duje Mihanović <duje@dujemihanovic.xyz>

Commit a41fcca4b342 ("mmc: sdhci-pxav3: set NEED_RSP_BUSY capability")
fixed eMMC probing on this board. Enable the eMMC and add its pinctrl.

Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
---
 .../marvell/mmp/pxa1908-samsung-coreprimevelte.dts | 79 +++++++++++++++++++++-
 1 file changed, 77 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
index aa161982ca43844287d212e8a24884d2b8440fed..78b7bccfc5f299889d1b9a8fd2c08554f17eb147 100644
--- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -292,6 +292,79 @@ sdh0_pins_2: sdh0-pins-2 {
 		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
 		pinctrl-single,low-power-mode = <0x208 0x388>;
 	};
+
+	sdh2_pins_0: sdh2-pins-0 {
+		pinctrl-single,pins = <
+			0x24 1
+			0x28 1
+			0x2c 1
+			0x30 1
+			0x34 1
+			0x38 1
+			0x3c 1
+			0x40 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh2_pins_1: sdh2-pins-1 {
+		pinctrl-single,pins = <0x64 1>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh2_pins_2: sdh2-pins-2 {
+		pinctrl-single,pins = <0x5c 1>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh2_fast_pins_0: sdh2-fast-pins-0 {
+		pinctrl-single,pins = <
+			0x24 1
+			0x28 1
+			0x2c 1
+			0x30 1
+			0x34 1
+			0x38 1
+			0x3c 1
+			0x40 1
+		>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh2_fast_pins_1: sdh2-fast-pins-1 {
+		pinctrl-single,pins = <0x64 1>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh2_fast_pins_2: sdh2-fast-pins-2 {
+		pinctrl-single,pins = <0x5c 1>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
 };
 
 &uart0 {
@@ -320,11 +393,13 @@ &usb {
 };
 
 &sdh2 {
-	/* Disabled for now because initialization fails with -ETIMEDOUT. */
-	status = "disabled";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sdh2_pins_0 &sdh2_pins_1 &sdh2_pins_2>;
+	pinctrl-1 = <&sdh2_fast_pins_0 &sdh2_fast_pins_1 &sdh2_fast_pins_2>;
 	bus-width = <8>;
 	non-removable;
 	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
 };
 
 &sdh0 {

-- 
2.51.0