On Fri, Sep 12, 2025 at 05:46:20PM +0530, Siddharth Vadapalli wrote:
> In ks_pcie_probe(), the switch-case for the "mode" is used to configure
> the PCIe Controller for either Root-Complex or Endpoint mode of operation.
> Prior to the switch-case statement for "mode" an invalid mode will result
> in probe failure only if "dw_pcie_ver_is_ge(pci, 480A)" is true, which
> is the case for the AM654 platform. On the other hand, when that is not
> the case, "ks_pcie_set_mode()" will be invoked, which does not validate
> the mode. As a result, it is possible for the switch-case statement for
> "mode" to receive an invalid mode. Currently, an error message is displayed
> in the "default" case where "mode" is neither "DW_PCIE_RC_TYPE" nor
> "DW_PCIE_EP_TYPE", but the probe succeeds. However, since the configuration
> required for Root-Complex and Endpoint mode have not been performed, the
> Controller is not operational.
>
> Fix this by exiting "ks_pcie_probe()" with the return value of "-EINVAL"
> in addition to displaying the existing error message.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Fixes tag? And probably CC stable since the controller seems to be not
operations without this fix.
- Mani
> ---
>
> v1: https://lore.kernel.org/r/20250903124505.365913-11-s-vadapalli@ti.com/
> No changes since v1.
>
> drivers/pci/controller/dwc/pci-keystone.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
> index 2da9feaaf9ee..e85942b4f6be 100644
> --- a/drivers/pci/controller/dwc/pci-keystone.c
> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> @@ -1414,6 +1414,8 @@ static int ks_pcie_probe(struct platform_device *pdev)
> break;
> default:
> dev_err(dev, "INVALID device type %d\n", mode);
> + ret = -EINVAL;
> + goto err_get_sync;
> }
>
> ks_pcie_enable_error_irq(ks_pcie);
> --
> 2.43.0
>
--
மணிவண்ணன் சதாசிவம்