Commit under Fixes introduced the IRQ handler for "ks-pcie-error-irq".
The interrupt is acquired using "request_irq()" but is never freed if
the driver exits due to an error. Although the section in the driver that
invokes "request_irq()" has moved around over time, the issue hasn't been
addressed until now.
Fix this by using "devm_request_irq()" which shall automatically release
the interrupt if the driver exits. Also, since the interrupt handler for
the "ks-pcie-error-irq" namely "ks_pcie_handle_error_irq() is only printing
the error and clearing the interrupt, there is no necessity to prefer
devm_request_threaded_irq() over devm_request_irq().
Fixes: 025dd3daeda7 ("PCI: keystone: Add error IRQ handler")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/r/3d3a4b52-e343-42f3-9d69-94c259812143@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 2b2632e513b5..21808a9e5158 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -1201,8 +1201,8 @@ static int ks_pcie_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- ret = request_irq(irq, ks_pcie_err_irq_handler, IRQF_SHARED,
- "ks-pcie-error-irq", ks_pcie);
+ ret = devm_request_irq(dev, irq, ks_pcie_err_irq_handler, IRQF_SHARED,
+ "ks-pcie-error-irq", ks_pcie);
if (ret < 0) {
dev_err(dev, "failed to request error IRQ %d\n",
irq);
--
2.43.0