Since the assigned-clock-sscs property [1] has been accepted into the device
tree schema, we can now support it in the Linux clock driver. Therefore,
I’ve picked up the previously submitted work [2] titled “clk: Support
spread spectrum and use it in clk-pll144x and clk-scmi.”
As more than six months have passed since [2] was posted, I’m treating this
patchset as a new submission rather than a v3.
- Introduce clk_set_spread_spectrum to set the parameters for enabling
spread spectrum of a clock.
- Parse 'assigned-clock-sscs' and configure it by default before using the
clock. This property is parsed before parsing clock rate.
- Enable this feature for clk-scmi on i.MX95.
Because SCMI spec will not include spread spectrum as a standard
extension, we still need to use NXP i.MX OEM extension.
[1] https://github.com/devicetree-org/dt-schema/pull/154
[2] https://lore.kernel.org/all/20250205-clk-ssc-v2-0-fa73083caa92@nxp.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v3:
- New patch 1 for dt-bindings per comment from Brian
https://lore.kernel.org/all/aLeEFzXkPog_dt2B@x1/
This might not be good to add a new dt-binding file in v3. But this is
quite a simple file that just has four macros to encode modulation
method. So hope this is fine for DT maintainers.
- Add Brain's R-b for patch 2
- New patch 3 to add Kunit test per Brain. Since Brain helped
draft part of the code, I added Co-developed-by tag from Brain.
- Link to v2: https://lore.kernel.org/r/20250901-clk-ssc-version1-v2-0-1d0a486dffe6@nxp.com
Changes in v2:
- Simplify the code in patch 2 per Dan Carpenter and Brian Masney
- Rebased to next-20250829
- Link to v1: https://lore.kernel.org/r/20250812-clk-ssc-version1-v1-0-cef60f20d770@nxp.com
---
Peng Fan (5):
dt-bindings: clock: Add spread spectrum definition
clk: Introduce clk_hw_set_spread_spectrum
clk: conf: Support assigned-clock-sscs
clk: Add KUnit tests for assigned-clock-sscs
clk: scmi: Support Spread Spectrum for NXP i.MX95
drivers/clk/Makefile | 6 +
drivers/clk/clk-conf.c | 69 ++++++++++++
drivers/clk/clk-scmi.c | 64 ++++++++++-
drivers/clk/clk.c | 26 +++++
drivers/clk/clk_test.c | 121 ++++++++++++++++++++-
drivers/clk/kunit_clk_assigned_rates.h | 10 ++
drivers/clk/kunit_clk_assigned_rates_multiple.dtso | 6 +
...kunit_clk_assigned_rates_multiple_consumer.dtso | 6 +
drivers/clk/kunit_clk_assigned_rates_one.dtso | 3 +
.../clk/kunit_clk_assigned_rates_one_consumer.dtso | 3 +
.../clk/kunit_clk_assigned_rates_u64_multiple.dtso | 6 +
...t_clk_assigned_rates_u64_multiple_consumer.dtso | 6 +
drivers/clk/kunit_clk_assigned_rates_u64_one.dtso | 3 +
.../kunit_clk_assigned_rates_u64_one_consumer.dtso | 3 +
.../kunit_clk_assigned_rates_zero_consumer.dtso | 1 +
drivers/clk/kunit_clk_assigned_sscs_null.dtso | 16 +++
.../clk/kunit_clk_assigned_sscs_null_consumer.dtso | 20 ++++
drivers/clk/kunit_clk_assigned_sscs_without.dtso | 15 +++
.../kunit_clk_assigned_sscs_without_consumer.dtso | 19 ++++
drivers/clk/kunit_clk_assigned_sscs_zero.dtso | 12 ++
.../clk/kunit_clk_assigned_sscs_zero_consumer.dtso | 16 +++
include/dt-bindings/clock/clock.h | 14 +++
include/linux/clk-provider.h | 22 ++++
include/linux/scmi_protocol.h | 5 +
24 files changed, 465 insertions(+), 7 deletions(-)
---
base-commit: cd996742d7bc41dc968843b64e6af19ff32c72fa
change-id: 20250812-clk-ssc-version1-acf6f6efbd96
Best regards,
--
Peng Fan <peng.fan@nxp.com>